SiP32510 www.vishay.com Vishay Siliconix 1.2 V to 5.5 V, Slew Rate Controlled Load Switch in TSOT23-6 DESCRIPTION FEATURES SiP32510 is a slew rate controlled load switches designed 1.2 V to 5.5 V operation voltage range for 1.2 V to 5.5 V operation. Flat low R down to 1.5 V ON The switch element is of n-channel device that provides low 44 m typical from 1.8 V to 5 V R of 44 m typically over a wide range of input. ON Slew rate controlled turn-on: 1.6 ms at 3.3 V SiP32510 has low switch on-resistance starting at 1.5 V Low quiescent current < 1 A when disabled Available input supply. It features a controlled soft on slew rate 10.5 A typical at V = 1.2 V IN of typical 1.6 ms that limits the inrush current for designs Reverse current blocking when switch is off, with of heavy capacitive load and minimizes the resulting voltage guaranteed less than 2 A leakage droop at the power rails. With a typical turn on delay of 0.4 ms, the total turn on time is typically 2 ms. Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 The SiP32510 features a low voltage control logic interfac e (on / off interface) that can interface with low voltage control APPLICATIONS signals without extra level shifting circuit. PDAs / smart phones The SiP32510 has exceptionally low shutdown current and provides reverse blocking to prevent high current flowing Ultrabook and notebook computer into the power source. Tablet devices SiP32510 integrates a switch off output discharge circuit. Portable media players SiP32510 is available in TSOT23-6 package. Digital camera GPS navigation devices Data storage devices Optical, industrial, medical, and healthcare devices Peripherals Office automation Networking TYPICAL APPLICATION CIRCUIT V IN IN OUT V OUT SiP32510 C C IN OUT 4.7 F 0.1 F EN GND EN GND GND Fig. 1 - SiP32510 Typical Application Circuit ORDERING INFORMATION TEMPERATURE RANGE PACKAGE MARKING PART NUMBER -40 C to +85 C TSOT23-6 LF SiP32510DT-T1-GE3 Note -GE3 denotes halogen-free and RoHS-compliant S20-0528-Rev. E, 06-Jul-2020 Document Number: 63577 1 For technical questions, contact: powerictechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000SiP32510 www.vishay.com Vishay Siliconix ABSOLUTE MAXIMUM RATINGS PARAMETER LIMIT UNIT Supply input voltage (V ) -0.3 to 6 IN Enable input voltage (V ) -0.3 to 6 V EN Output voltage (V )-0.3 to 6 OUT c Maximum continuous switch current (I ) 3 max. c Maximum repetitive pulsed current (1 ms, 10 % duty cycle) 6 A c Maximum non-repetitive pulsed current (100 s, EN = active) 12 ESD rating (HBM) > 4 kV ESD rating (CDM) 1.5 Junction temperature (T ) -40 to +150 C J a Thermal resistance ( ) 150 C/W JA a, b Power dissipation (P ) 833 mW D Notes a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout b. Derate 6.66 mW/C above T = 25 C, see PCB layout A c. T = 25 C A Stresses beyond those listed underAbsolute Maximum Rating may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating/conditions for extended periods may affect device reliability. RECOMMENDED OPERATING RANGE PARAMETER LIMIT UNIT Input voltage range (V ) 1.2 to 5.5 V IN Operating junction temperature range (T ) -40 to +125 C J SPECIFICATIONS LIMITS TEST CONDITIONS UNLESS SPECIFIED -40 C to +85 C PARAMETER SYMBOL V = 5 V, T = -40 C to +85 C UNIT IN A (typical values are at T = 25 C) a b a A MIN. TYP. MAX. c Operating voltage V 1.2 - 5.5 V IN V = 1.2 V, EN = active - 10.5 17 IN V = 1.8 V, EN = active - 21 30 IN V = 2.5 V, EN = active - 34 50 IN Quiescent current I Q V = 3.6 V, EN = active - 54 90 IN V = 4.3 V, EN = active - 68 110 A IN V = 5 V, EN = active - 105 180 IN Off supply current I EN = inactive, OUT = open - - 1 Q(off) Off switch current I EN = inactive, OUT = GND - - 1 DS(off) Reverse blocking current I V = 5 V, V = 0 V, V = inactive - - 10 RB OUT IN EN V = 1.8 V, I = 100 mA, T = 25 C - 45 53 IN L A V = 2.5 V, I = 100 mA, T = 25 C - 44 52 IN L A On-resistance R V = 3.6 V, I = 100 mA, T = 25 C - 44 52 m DS(on) IN L A V = 4.3 V, I = 100 mA, T = 25 C - 44 52 IN L A V = 5 V, I = 100 mA, T = 25 C - 46 52 IN L A On-resistance temp. coefficient TC - 3570 - ppm/C RDS V = 1.2 V - - 0.3 IN d V = 1.8 V - - 0.4 IN d V = 2.5 V - - 0.5 IN c EN input low voltage V V IL d V = 3.6 V - - 0.6 IN d V = 4.3 V - - 0.7 IN d V = 5 V - - 0.8 IN S20-0528-Rev. E, 06-Jul-2020 Document Number: 63577 2 For technical questions, contact: powerictechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000