SMA5J5.0A thru SMA5J40CA www.vishay.com Vishay General Semiconductor High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional Excellent clamping capability Very fast response time Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C DO-214AC (SMA) AEC-Q101 qualified Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS V 6.4 V to 49.1 V BR Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting V 5.0 V to 40 V WM on ICs, MOSFET, signal lines of sensor units for consumer, P 500 W PPM computer, industrial, automotive, and telecommunication. I (uni-directional only) 40 A FSM MECHANICAL DATA T max. 150 C J Case: DO-214AC (SMA) Polarity Uni-directional, bi-directional Molding compound meets UL 94 V-0 flammability rating Package DO-214AC (SMA) Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 DEVICES FOR BI-DIRECTION APPLICATIONS E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix For bi-directional devices use CA suffix (e.g. SMA5J40CA). meets JESD 201 class 2 whisker test Electrical characteristics apply in both directions. Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak pulse power dissipation with a 10/1000 s waveform (fig. 1) P 500 W PPM (1) Peak pulse current with a 10/1000 s waveform I See next table A PPM (2) Peak forward surge current 8.3 ms single half sine-wave uni-directional only I 40 A FSM Operating junction and storage temperature range T , T - 55 to + 150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2. A (2) Mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 13-Dec-13 Document Number: 88875 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000SMA5J5.0A thru SMA5J40CA www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM DEVICE MARKING TEST STAND-OFF VOLTAGE REVERSE PEAK PULSE CLAMPING CODE CURRENT VOLTAGE (1) DEVICE TYPE V (V) LEAKAGE SURGE VOLTAGE AT BR I V T WM AT V CURRENT I WM PPM (mA) (V) UNI BI MIN. MAX. (3) (2) I (A) I (A) V (V) D PPM C (5) SMA5J5.0A 5AE 5AE 6.40 7.07 10 5.0 800 54.3 9.2 SMA5J6.0A 5AG 5AG 6.67 7.37 10 6.0 800 48.5 10.3 SMA5J6.5A 5AK 5AK 7.22 7.98 10 6.5 500 44.6 11.2 SMA5J7.0A 5AM 5AM 7.78 8.60 10 7.0 200 41.7 12.0 SMA5J7.5A 5AP 5AP 8.33 9.21 1.0 7.5 100 38.8 12.9 SMA5J8.0A 5AR 5AR 8.89 9.83 1.0 8.0 50 36.8 13.6 SMA5J8.5A 5AT 5AT 9.44 10.4 1.0 8.5 10 34.7 14.4 SMA5J9.0A 5AV 5AV 10.0 11.1 1.0 9.0 5.0 32.5 15.4 SMA5J10A 5AX 5AX 11.1 12.3 1.0 10 1.0 29.4 17.0 SMA5J11A 5AZ 5AZ 12.2 13.5 1.0 11 1.0 27.5 18.2 SMA5J12A 5BE 5BE 13.3 14.7 1.0 12 1.0 25.1 19.9 SMA5J13A 5BG 5BG 14.4 15.9 1.0 13 1.0 23.3 21.5 SMA5J14A 5BK 5BK 15.6 17.2 1.0 14 1.0 21.6 23.2 SMA5J15A 5BM 5BM 16.7 18.5 1.0 15 1.0 20.5 24.4 SMA5J16A 5BP 5BP 17.8 19.7 1.0 16 1.0 19.2 26.0 SMA5J17A 5BR 5BR 18.9 20.9 1.0 17 1.0 18.1 27.6 SMA5J18A 5BT 5BT 20.0 22.1 1.0 18 1.0 17.1 29.2 SMA5J20A 5BV 5BV 22.2 24.5 1.0 20 1.0 15.4 32.4 SMA5J22A 5BX 5BX 24.4 26.9 1.0 22 1.0 14.1 35.5 SMA5J24A 5BZ 5BZ 26.7 29.5 1.0 24 1.0 12.9 38.9 SMA5J26A 5CE 5CE 28.9 31.9 1.0 26 1.0 11.9 42.1 SMA5J28A 5CG 5CG 31.1 34.4 1.0 28 1.0 11.0 45.4 SMA5J30A 5CK 5CK 33.3 36.8 1.0 30 1.0 10.3 48.4 SMA5J33A 5CM 5CM 36.7 40.6 1.0 33 1.0 9.4 53.3 SMA5J36A 5CP 5CP 40.0 44.2 1.0 36 1.0 8.6 58.1 SMA5J40A 5CR 5CR 44.4 49.1 1.0 40 1.0 7.8 64.5 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) For bi-directional types having V of 10 V and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMA5J5.0CA, the maximum V is 7.25 V BR (6) V = 3.5 V at I = 25 A (uni-directional only) F F THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Typical thermal resistance, junction to ambient R 80 JA C/ W Typical thermal resistance, junction to lead R 25 JL Note (1) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMA5J5.0A-E3/61 0.064 61 1800 7 diameter plastic tape and reel SMA5J5.0A-E3/5A 0.064 5A 7500 13 diameter plastic tape and reel (1) SMA5J5.0AHE3/61 0.064 61 1800 7 diameter plastic tape and reel (1) SMA5J5.0AHE3/5A 0.064 5A 7500 13 diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 13-Dec-13 Document Number: 88875 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000