SMBJ15CA Vishay

SMBJ5.0 thru 188CA Vishay Semiconductors formerly General Semiconductor Surface Mount TRANSZORB Stand-off Voltage 5.0 to 188V Peak Pulse Power 600W Transient Voltage Suppressors DO-214AA Cathode Band (SMB J-Bend) 0.086 (2.20) 0.155 (3.94) 0.077 (1.95) 0.130 (3.30) Mounting Pad Layout 0.106 MAX (2.69 MAX) 0.180 (4.57) 0.160 (4.06) 0.083 MIN 0.012 (0.305) (2.10 MIN) 0.006 (0.152) 0.096 (2.44) 0.050 MIN 0.084 (2.13) (1.27 MIN) 0.220 REF Dimensions in inches and (millimeters) 0.060 (1.52) 0.008 0.030 (0.76) (0.203) Max. 0.220 (5.59) Features 0.205 (5.21) Underwriters Laboratory Recognition under UL standard Mechanical Data for safety 497B: Isolated Loop Circuit Protection Low profile package with built-in strain relief for surface Case: JEDEC DO-214AA molded plastic over mounted applications passivated junction Glass passivated junction Terminals: Solder plated, solderable per Low incremental surge resistance, excellent clamping MIL-STD-750, Method 2026 capability Polarity: For unidirectional types the band denotes the 600W peak pulse power capability with a 10/1000 s cathode, which is positive with respect to the anode waveform, repetition rate (duty cycle): 0.01% under normal TVS operation Very fast response time Weight: 0.003 oz., 0.093 g High temperature soldering guaranteed: Flammability: Epoxy is rated UL 94V-0 250C/10 seconds at terminals Packaging Codes Options (Antistatic): Contact local sales office for gull-wing (SMBG prefix) 51 2K per Bulk box, 20K/carton lead form (DO-215AA) 52 750 per 7 plastic Reel (12mm tape), 15K/carton 5B 3.2K per 13 plastic Reel (12mm tape), 32K/carton Devices for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions. Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Parameter Symbol Value Unit Peak pulse power dissipation with P Minimum 600 W PPM (1)(2) a 10/1000 s waveform (Fig. 1) (1) Peak pulse current with a 10/1000 s waveform I See Table Below A PPM Peak forward surge current 8.3ms single half sine-wave I 100 A FSM (2) uni-directional only (4) Typical thermal resistance, junction to ambient R 100 C/W JA Typical thermal resistance, junction to lead R 20 C/W JL Operating junction and storage temperature range T , T 55 to +150 C J STG Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above T = 25C per Fig. 2 A (2) Mounted on 0.2 x 0.2 (5.0 x 5.0mm) copper pads to each terminal (3) Mounted on minimum recommended pad layout Document Number 88392 www.vishay.com 2-May-02 1 Extended Voltage RangeSMBJ5.0 thru 188CA Vishay Semiconductors formerly General Semiconductor Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. VF = 3.5V at IF = 50A (uni-directional only) Device Breakdown Voltage Maximum Maximum Maximum (1) Device Type Marking V(BR) at IT Test Stand-off Reverse Leakage Peak Pulse Surge Clamping Modified Code (V) Current Voltage at VWM Current IPPM Voltage at IPPM (3) (2) J Bend Lead UNI BI Min Max IT (mA) VWM (V) ID ( A) (A) VC (V) +SMBJ5.0 KD KD 6.40 7.82 10 5.0 800 62.5 9.6 (5) +SMBJ5.0A KE KE 6.40 7.07 10 5.0 800 65.2 9.2 +SMBJ6.0 KF KF 6.67 8.15 10 6.0 800 52.6 11.4 +SMBJ6.0A KG KG 6.67 7.37 10 6.0 800 58.3 10.3 +SMBJ6.5 KH AH 7.22 8.82 10 6.5 500 48.8 12.3 +SMBJ6.5A KK AK 7.22 7.98 10 6.5 500 53.6 11.2 +SMBJ7.0 KL KL 7.78 9.51 10 7.0 200 45.1 13.3 +SMBJ7.0A KM KM 7.78 8.60 10 7.0 200 50.0 12.0 +SMBJ7.5 KN AN 8.33 10.2 1.0 7.5 100 42.0 14.3 +SMBJ7.5A KP AP 8.33 9.21 1.0 7.5 100 46.5 12.9 +SMBJ8.0 KQ AQ 8.89 10.9 1.0 8.0 50 40.0 15.0 +SMBJ8.0A KR AR 8.89 9.83 1.0 8.0 50 44.1 13.6 +SMBJ8.5 KS AS 9.44 11.5 1.0 8.5 20 37.7 15.9 +SMBJ8.5A KT AT 9.44 10.4 1.0 8.5 20 41.7 14.4 +SMBJ9.0 KU AU 10.0 12.2 1.0 9.0 10 35.5 16.9 +SMBJ9.0A KV AV 10.0 11.1 1.0 9.0 10 39.0 15.4 +SMBJ10 KW AW 11.1 13.6 1.0 10 5.0 31.9 18.8 +SMBJ10A KX AX 11.1 12.3 1.0 10 5.0 35.3 17.0 +SMBJ11 KY KY 12.2 14.9 1.0 11 5.0 29.9 20.1 +SMBJ11A KZ KZ 12.2 13.5 1.0 11 5.0 33.0 18.2 +SMBJ12 LD BD 13.3 16.3 1.0 12 5.0 27.3 22.0 +SMBJ12A LE BE 13.3 14.7 1.0 12 5.0 30.2 19.9 +SMBJ13 LF LF 14.4 17.6 1.0 13 1.0 25.2 23.8 +SMBJ13A LG LG 14.4 15.9 1.0 13 1.0 27.9 21.5 +SMBJ14 LH BH 15.6 19.1 1.0 14 1.0 23.3 25.8 +SMBJ14A LK BK 15.6 17.2 1.0 14 1.0 25.9 23.2 +SMBJ15 LL BL 16.7 20.4 1.0 15 1.0 22.3 26.9 +SMBJ15A LM BM 16.7 18.5 1.0 15 1.0 24.6 24.4 +SMBJ16 LN LN 17.8 21.8 1.0 16 1.0 20.8 28.8 +SMBJ16A LP LM 17.8 19.7 1.0 16 1.0 23.1 26.0 +SMBJ17 LQ LQ 18.9 23.1 1.0 17 1.0 19.7 30.5 +SMBJ17A LR LR 18.9 20.9 1.0 17 1.0 21.7 27.6 +SMBJ18 LS BS 20.0 24.4 1.0 18 1.0 18.6 32.2 +SMBJ18A LT BT 20.0 22.1 1.0 18 1.0 20.5 29.2 +SMBJ20 LU LU 22.2 27.1 1.0 20 1.0 16.8 35.8 +SMBJ20A LV LV 22.2 24.5 1.0 20 1.0 18.5 32.4 +SMBJ22 LW BW 24.4 29.8 1.0 22 1.0 15.2 39.4 +SMBJ22A LX BX 24.4 26.9 1.0 22 1.0 16.9 35.5 +SMBJ24 LY BY 26.7 32.6 1.0 24 1.0 14.0 43.0 +SMBJ24A LZ BZ 26.7 29.5 1.0 24 1.0 15.4 38.9 +SMBJ26 MD CD 28.9 35.3 1.0 26 1.0 12.9 46.6 +SMBJ26A ME CE 28.9 31.9 1.0 26 1.0 14.3 42.1 +SMBJ28 MF MF 31.1 38.0 1.0 28 1.0 12.0 50.0 +SMBJ28A MG MG 31.1 34.4 1.0 28 1.0 13.2 45.4 +SMBJ30 MH CH 33.3 40.7 1.0 30 1.0 11.2 53.5 +SMBJ30A MK CK 33.3 36.8 1.0 30 1.0 12.4 48.4 Notes: (1) Pulse test: t 50ms p (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having V of 10 Volts and less, the I limit is doubled WM D (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bidirectional SMBG/SMBJ5.0CA, the maximum V is 7.25V (BR) + Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices www.vishay.com Document Number 88392 2 2-May-02