SMM0102 www.vishay.com Vishay Draloric Thin Film Micro-MELF Resistors FEATURES Advanced thin film technology Low TCR and tight tolerances Excellent stability in different environmental conditions Intrinsic sulfur resistance Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Automotive SMM0102 thin film Micro-MELF resistors are the perfect Telecommunication choice for most fields of modern professional electronics Industrial where reliability and stability is of major concern. The typical applications in the fields of automotive and medical Medical equipment equipment reflect the outstanding level of proven reliability. TECHNICAL SPECIFICATIONS DESCRIPTION SMM0102 DIN size 0102 Metric size code RC2211M Resistance range 10 to 2.21 M 0 Resistance tolerance 1 % 0.1 % Temperature coefficient 50 ppm/K 25 ppm/K 15 ppm/K (1) Rated dissipation, P 0.200 W 70 Operating voltage, U AC /DC 150 V max. RMS (1) Permissible film temperature, 125 C F max. (1) Operating temperature range -55 C to 125 C Permissible voltage against ambient (insulation): 1 min U 200 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION below. APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 04-Dec-15 Document Number: 20003 1 For technical questions, contact: melf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SMM0102 www.vishay.com Vishay Draloric MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD Rated dissipation, P SMM0102 0.200 W 70 Operating temperature range -55 C to 125 C Permissible film temperature, max. 125 C F SMM0102 10 to 2.21 M Max. resistance change at P for resistance range, 70 1000 h 0.5 % R/R after: 8000 h 1 % Note A suitable low thermal resistance of the circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES 50 ppm/K 1 % 10 to 2.21 M E24 E96 SMM0102 25 ppm/K 0.1 % 100 to 100 k E24 E192 15 ppm/K 0.1 % 100 to 100 k OMM0102 Jumper, I = 2 A 10 m 0 - max. PACKAGING PACKAGING TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS (1) B1 1000 180 mm / 7 SMM0102 Antistatic blister tape acc. B3 3000 8 mm 4 mm 180 mm / 7 OMM0102 IEC 60286-3, Type 2a B0 10 000 330 mm / 13 Note (1) Package of 1000 pieces, code B1, is available only for products with tolerance 0.1 %. Revision: 04-Dec-15 Document Number: 20003 2 For technical questions, contact: melf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000