SMP3V3 thru SMP36A www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB Transient Voltage Suppressors FEATURES eSMP Series Very low profile - typical height of 1.0 mm Ideal for automated placement Available in uni-directional 400 W peak pulse power capability with a 10/1000 s waveform Excellent clamping capability Very fast response time SMP (DO-220AA) Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak Anode Cathode of 260 C Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 click logo to get started DESIGN SUPPORT TOOLS TYPICAL APPLICATIONS Models Use in sensitive electronics protection against voltage Available transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. PRIMARY CHARACTERISTICS V uni-directional 4.10 V to 44.2 V BR MECHANICAL DATA V 3.3 V to 36 V WM Case: SMP (DO-220AA) Molding compound meets UL 94 V-0 flammability rating P 400 W PPM Base P/N-M3 - halogen-free, RoHS-compliant, and I 40 A FSM industrial grade T max. 150 C J Terminals: matte tin plated leads, solderable per Polarity Uni-directional J-STD-002 and JESD 22-B102 Package SMP (DO-220AA) M3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak pulse power dissipation with a 10/1000 s waveform (fig. 1) P 400 W PPM (1) I See table next page A Peak pulse current with a 10/1000 s waveform PPM (2) Peak forward surge current 10 ms single half sine-wave I 40 A FSM (3) Maximum instantaneous forward voltage at 25 A V 2.5 V F Operating junction and storage temperature range T , T -55 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pads to each terminal (3) Pulse test: 300 s pulse width, 1 % duty cycle Revision: 10-Aug-2018 Document Number: 88481 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SMP3V3 thru SMP36A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM TEST VOLTAGE DEVICE STAND-OFF REVERSE PEAK PULSE CLAMPING (1) CURRENT V AT I DEVICE TYPE MARKING BR T VOLTAGE V LEAKAGE SURGE VOLTAGE AT WM I T (V) (V) AT V CURRENT I CODE WM PPM (mA) (3) (2) I (A) I (A) V (V) MIN. MAX. D PPM C SMP3V3 AC 4.10 5.10 1.0 3.3 200 54.8 7.3 SMP5.0A AE 6.40 7.07 10 5.0 150 43.5 9.2 SMP6.0A AG 6.67 7.37 10 6.0 600 38.8 10.3 SMP6.5A AK 7.22 7.98 10 6.5 100 35.7 11.2 SMP7.0A AM 7.78 8.60 10 7.0 50 33.3 12.0 SMP7.5A AN 8.33 9.21 1.0 7.5 50 31.0 12.9 SMP8.0A AR 8.89 9.83 1.0 8.0 20 29.4 13.6 SMP11A AZ 12.2 13.5 1.0 11 1.0 22.0 18.2 SMP12A BE 13.3 14.7 1.0 12 1.0 20.1 19.9 SMP13A BG 14.4 15.9 1.0 13 1.0 18.6 21.5 SMP14A BK 15.6 17.2 1.0 14 1.0 17.2 23.2 SMP15A BM 16.7 18.5 1.0 15 1.0 16.4 24.4 SMP16A BP 17.8 19.7 1.0 16 1.0 15.4 26.0 SMP17A BR 18.9 20.9 1.0 17 1.0 14.5 27.6 SMP18A BT 20.0 22.1 1.0 18 1.0 13.7 29.2 SMP20A BV 22.2 24.5 1.0 20 1.0 12.3 32.4 SMP22A BX 24.4 26.9 1.0 22 1.0 11.3 35.5 SMP24A BZ 26.7 29.5 1.0 24 1.0 10.3 38.9 SMP26A CE 28.9 31.9 1.0 26 1.0 9.5 42.1 SMP28A CG 31.1 34.4 1.0 28 1.0 8.8 45.4 SMP30A CK 33.3 36.8 1.0 30 1.0 8.3 48.4 SMP33A CM 36.7 40.6 1.0 33 1.0 7.5 53.3 SMP36A CP 40.0 44.2 1.0 36 1.0 6.9 58.1 Notes (1) V measured after I applied for 300 s, I = square wave pulse or equivalent BR T T (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL LIMIT UNIT (1) Typical thermal resistance, junction to lead R 50 C/W JL (2) Typical thermal resistance, junction to ambient R 250 C/W JA Notes (1) Mounted on PCB with 5.0 mm x 5.0 mm copper pad areas attached to each terminal (2) Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMP3V3-M3/84A 0.024 84A 3000 7 diameter plastic tape and reel SMP3V3-M3/85A 0.024 85A 10 000 13 diameter plastic tape and reel SMP11A-M3/84A 0.024 84A 3000 7 diameter plastic tape and reel SMP11A-M3/85A 0.024 85A 10 000 13 diameter plastic tape and reel Revision: 10-Aug-2018 Document Number: 88481 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000