SOGC 01, 03, 05 www.vishay.com Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Wide Body, Small Outline, Molded DIP, Surface FEATURES Isolated, bussed, and dual terminator schematics available Available 0.110 (2.79 mm) maximum seated height Rugged, molded case construction 0.050 (1.27 mm) lead spacing Reduces total assembly costs Compatible with automatic surface mounting equipment Available Uniform performance characteristics Meets EIA PDP 100, SOGN-0003 outline dimensions Available in tube pack or tape and reel pack Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING POWER RATING RESISTANCE MAXIMUM WORKING TEMPERATURE (1) GLOBAL TOLERANCE (2) SCHEMATIC ELEMENT P PACKAGE P RANGE VOLTAGE COEFFICIENT 70 C 70 C MODEL % W W V ppm/C DC 01 0.1 1.6 1, 2, 5 10 to 1M 50 100 SOGC16 03 0.19 1.6 1, 2, 5 10 to 1M 50 100 05 0.1 1.6 1, 2, 5 10 to 1M 50 100 01 0.1 2.0 1, 2, 5 10 to 1M 50 100 SOGC20 03 0.19 2.0 1, 2, 5 10 to 1M 50 100 05 0.1 2.0 1, 2, 5 10 to 1M 50 100 Notes 100 m maximum on 0 -jumper. (1) 2 % standard, 1 % and 5 % available. (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: SOGC200310K0GDC (preferred part numbering format) S O G C 2 0 0 3 1 0 K 0 G D C GLOBAL RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL VALUE CODE SOGC 16 01 = Bussed R = F = 1 % Blank = Standard EJ = Lead (Pb)-free, tube 20 03 = Isolated K = k G = 2 % (Dash number) EA = Lead (Pb)-free, 00 = Special M = M J = 5 % (Up to 3 digits) tape and reel 10R0 = 10 S = Special From 1 to 999 DC = Tin/lead, tube 680K = 680 k Z = 0 Jumper as applicable RZ = Tin/lead, 1M00 = 1.0 M tape and reel 0000 = 0 Jumper Historical Part Number example: SOGC2002103G (will continue to be accepted) SOGC 20 03 103 G D02 HISTORIC RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL VALUE CODE New Global Part Numbering: SOGC1605131AGRZ (preferred part numbering format) S O G C 1 6 0 5 1 3 1 A G R Z GLOBAL RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING SPECIAL MODEL VALUE CODE SOGC 16 05 = 3 digit EJ = Lead (Pb)-free, tube Blank = Standard F = 1 % 20 Dual impedance code, EA = Lead (Pb)-free, (Dash number) G = 2 % terminator followed by alpha tape and reel (Up to 3 digits) J = 5 % modifier (see From 1 to 999 as DC = Tin/lead, tube Imdedance applicable RZ = Tin/lead, Codes table) tape and reel Historical Part Number example: SOGC1605221331G (will continue to be accepted) SOGC 16 05 221 331 G R61 GLOBAL RESISTANCE RESISTANCE TOLERANCE PIN COUNT SCHEMATIC PACKAGING MODEL VALUE 1 VALUE 2 CODE Note For additional information on packaging, refer to the Surface Mount Network Packaging document (www.vishay.com/doc 31540). Revision: 12-Sep-13 Document Number: 31506 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000SOGC 01, 03, 05 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) B 0.050 (1.27) 0.105 Non-Accum. T yp. (2.67) 0.010 0.005 (0.254 0.127) 0.018 (0.457) Typ. 0.100 (2.54) 0.006 (0.152) Max. Typ. 0.406 0.012 SOGC 0.295 (10.31 0.305) (7.49) Pin 1 0.028 0.010 0.045 (1.14) 0.045 0.008 (0.711 0.254) Typ. A Ref. (1.14) (0.203) GLOBAL MODEL A B SOGC16 0.440 (11.18) 0.350 (8.89) SOGC20 0.540 (13.72) 0.450 (11.43) TECHNICAL SPECIFICATIONS PARAMETER UNIT SOGC16 SOGC20 Package power rating (max. at +70 C) W 1.6 2.0 TCR tracking (-55 C to +125 C) ppm/C 50 Voltage coefficient of resistance ppm/V < 50 typical Maximum operating voltage V 50 DC Operating temperature range C -55 to +125 Storage temperature range C -55 to +150 MECHANICAL SPECIFICATIONS Marking Model number, schematic number, value tolerance, pin 1 indicator, date code Marking resistance to solvents Permanency testing per MIL-STD-202, method 215 Maximum solder reflow temperature +255 C Solderability Per MIL-STD-202, method 208E Terminals Copper alloy. Solder dipped terminal Body Molded epoxy IMPEDANCE CODES CODE R ( )R ()CODER ( )R () 1 2 1 2 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc 31530). Revision: 12-Sep-13 Document Number: 31506 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000