STA www.vishay.com Vishay Wet Tantalum Capacitors with Hermetic Seal FEATURES All tantalum, hermetically sealed case Terminations: Axial leaded Utilizes proven Vishay SuperTan technology High and stable capacitance High reliability, rugged design 150 F to 4700 F 6 V to 15 V DC DC - 55 C to + 125 C APPLICATIONS NOTES a) No continuous reverse voltage permissible. Vishay STA represents a major breakthrough in Wet b) Transient reverse voltage surges are acceptable under Tantalum capacitor technology. Its unique cathode system, the following conditions: also used in the ST, provides the highest capacitance per The peak reverse voltage does not exceed 1.5 V and the unit volume available. The STA combines the inherent peak current times the duration of the reverse transient reliability of wet tantalum with the capacitance stability of does not exceed 0.05 As. In addition, the repetition solid tantalum, and there are no circuit impedance frequency of the reverse voltage surge is less than 10 Hz. restrictions. The range is exceptionally well suited for low c) The peak of the applied AC ripple and the applied DC voltage filtering and energy storage applications. voltage must not exceed the DC voltage rating of the capacitor. d) Ripple current ratings by part number at 85 C and 40 kHz are included in the table. Ripple current correction factors for other temperatures and frequencies are given on the next page. ORDERING INFORMATION STA 2700 15 T4 M I STYLE CAPACITANCE 85 C RATED CASE CODE CAPACITANCE INSULATING F DC VOLTAGE TOLERANCE SLEEVE M = 20 % I = Insulated K = 10 % X = Uninsulated DIMENSIONS in inches millimeters Terminal welded 0.025 + 0.002 to case 0.250 (6.35) (0.64 + 0.05) MAX. 0.094 (2.38) MAX. Terminal location D Dia. E L E within 0.031 of center L + 0.031/- 0.016 CASE CODE D MAX. INSULATED D 0.016 0.41 UNINSULATED E 0.250 6.35 + 0.79/- 0.41 T1 0.219 5.56 0.188 4.78 0.453 11.51 1.500 38.10 T2 0.312 7.92 0.281 7.14 0.641 16.28 2.250 57.15 T3 0.406 10.31 0.375 9.52 0.766 19.46 2.250 57.15 T4 0.406 10.31 0.375 9.52 1.062 26.97 2.250 57.15 Notes Material at egress is tantalum. Approx. weight T1: 2.3 g, T2: 5.7 g Insulation sleeving will lap over the ends of the capacitor case. T3: 9.4 g, T4: 14.8 g Tinned nickel leads, solderable and weldable. Revision: 16-Mar-12 Document Number: 43013 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 STA www.vishay.com Vishay STANDARD RATINGS MAX. IMP MAX. AC RIPPLE CAPACITANCE MAX. ESR MAX. DCL MAX. DF AT - 55 C CAPACITANCE 85 C AT 25 C CASE ( ) (A) AT 120 Hz AND CHANGE (%) 40 kHz PART NUMBER 120 Hz CODE (%) 120 Hz (mA) (F) 120 Hz 140 Hz 25 C 85 C - 55 C 85 C () RMS 6 V AT 85 C DC 470 T1 0.9 0.4 1 3 46 12 - 75 + 10 1500 STA470-6T1MI 1500 T2 0.7 0.3 3 8 101 9 - 80 + 10 2200 STA1500-6T2MI 3300 T3 0.5 0.2 8 30 150 7 - 90 + 18 2800 STA3300-6T3MI 4700 T4 0.3 0.2 10 35 155 5 - 90 + 18 3500 STA4700-6T4MI 10 V AT 85 C DC 330 T1 1.0 0.5 1 3 35 15 - 70 + 8 1400 STA330-10T1MI 1000 T2 0.8 0.3 3 10 70 8 - 80 + 10 2200 STA1000-10T2MI 2200 T3 0.5 0.3 5 30 109 6 - 85 + 15 2800 STA2200-10T3MI 3300 T4 0.4 0.2 8 30 119 3 - 85 + 18 3500 STA3300-10T4MI 15 V AT 85 C DC 150 T1 1.1 0.5 1 3 16 25 - 45 + 8 1400 STA150-15T1MI 680 T2 0.8 0.3 2 10 49 10 - 65 + 10 2200 STA680-15T2MI 1500 T3 0.6 0.2 5 25 81 9 - 80 + 10 2700 STA1500-15T3MI 2700 T4 0.4 0.2 4 25 109 4 - 80 + 15 3400 STA2700-15T4MI RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIES PEAK VOLTAGE FREQUENCY OF APPLIED RIPPLE 120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz CURRENT AMBIENT STILL 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 AIR TEMP. IN C 100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - - % of 90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - - 85 C rated 80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 - peak 70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 - voltage 66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50 Revision: 16-Mar-12 Document Number: 43013 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000