333 3 T22 www.vishay.com Vishay Wet Tantalum SMD Capacitors, Tantalum Metal Case with Glass-to-Tantalum Hermetic Seal FEATURES Enhanced performance, high reliability design SMD, standard tin / lead (Sn / Pb), 100 % tin Available (RoHS-compliant) available Available Mounting: surface-mount Increased thermal shock capability of 300 cycles Designed for the avionics and aerospac e Available ADDITIONAL RESOURCES applications Material categorization: for definitions of compliance 3D Models please see www.vishay.com/doc 99912 Note PERFORMANCE CHARACTERISTICS * This datasheet provides information about parts that are Operating Temperature: -55 C to +85 C RoHS-compliant and / or parts that are non RoHS-compliant. For (to +125 C with voltage derating) example, parts with lead (Pb) terminations are not RoHS-compliant. DC Leakage Current (DCL Max.): at +25 C and above: Please see the information / tables in this datasheet for details leakage current shall not exceed the values listed in th e Standard Ratings table. Capacitance Range: 10 F to 68 F Capacitance Tolerance: 10 %, 20 % standard Voltage Rating: 50 V to 125 V DC DC ORDERING INFORMATION T22 C 686 K 050 E S S TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION / RELIABILITY ESR CODE TOLERANCE RATING AT +85 C PACKAGING GRADE See This is expressed K = 10 % This is expressed Sn / Pb solder S = 48 h S = Ratings in picofarads. The M = 20 % in volts. To burn-in standard E = 7 (178 mm) reel and first two digits are complete the Z = non- L = 7 (178 mm), Case the significant three-digit block, established 1/2 reel Codes figures. The third zeros precede the reliability R = 7 (178 mm), table is the number of voltage rating. partial reel zeros to follow. A decimal point is indicated by an 100 % tin R (6R3 = 6.3 V). C = 7 (178 mm), reel H = 7 (178 mm), 1/2 reel U = 7 (178 mm), partial reel DIMENSIONS in inches millimeters H L1 P P L WEIGHT CASE CODE L (MAX.) L1 W H P T g W (AVERAGE) 0.279 0.008 0.291 0.008 0.098 0.008 0.197 0.008 0.354 0.303 0.008 C 2.40 9.0 7.7 0.2 7.1 0.2 7.4 0.2 2.5 0.2 5.0 0.2 Revision: 12-Nov-2019 Document Number: 40187 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 T T W W W DDD D T22 www.vishay.com Vishay MARKING VOLTAGE CODE VCODE Polarity mark 50 T Capacitance Voltage 686T 75 S Year Week YYXX 100 R Trademark 2 125 B STANDARD RATINGS MAX. DCL MAX. CAPACITANCE AC CAPACITANCE MAX. ESR MAX. IMP. (A) AT CHANGE (%) RIPPLE AT +25 C CASE AT +25 C AT -55 C PART NUMBER +85 C +85 C 120 Hz CODE 120 Hz 120 Hz 40 kHz +25 C AND -55 C +85 C +125 C (F) ( ) ( ) (mA ) +125 C RMS 50 V AT +85 C 30 V AT +125 C DC DC 68 C T22C686(1)050(2)(3)(4) 1.50 35 1 5 -25 8 15 1650 75 V AT +85 C 50 V AT +125 C DC DC 33 C T22C336(1)075(2)(3)(4) 2.50 66 1 5 -25 5 9 1310 100 V AT +85 C 65 V AT +125 C DC DC 15 C T22C156(1)100(2)(3)(4) 3.50 125 1 5 -18 3 10 1030 125 V AT +85 C 85 V AT +125 C DC DC 10 C T22C106(1)125(2)(3)(4) 5.50 175 1 5 -15 3 10 832 Note Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, H, E, L, R, U (3) Reliability level: Z, S (4) ESR: S POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 C (W) IN FREE AIR C0.9 STANDARD PACKAGING QUANTITY UNITS PER REEL CASE CODE 7 FULL REEL 7 HALF REEL 7 PARTIAL REEL C 100 50 25 Revision: 12-Nov-2019 Document Number: 40187 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000