T96 www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Built-in-Fuse, Conformal Coated Case FEATURES High reliability design with reliability screening available Available Surge current testing per MIL-PRF-55365 options available Available Standard and low ESR options Terminations: SnPb, standard. 100 % tin available Circuit protection for mission or safety critical systems Fuse characteristics: guaranteed fuse protection at 9 A, 100 ms PERFORMANCE / ELECTRICAL CHARACTERISTICS Mounting: surface mount www.vishay.com/doc 40209 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Note Capacitance Range: 10 F to 680 F * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For Capacitance Tolerance: 20 %, 10 % standard example, parts with lead (Pb) terminations are not RoHS-compliant. Voltage Rating: 4 V to 50 V DC DC Please see the information / tables in this datasheet for details Moisture Sensitivity Level 2a ORDERING INFORMATION T96 R 107 K 010 E S A S TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION AND RELIABILITY SURGE ESR CODE TOLERANCE RATING AT +85 C PACKAGING LEVEL CURRENT See This is K = 10 % This is expressed in E: Sn / Pb solder / S = 40 h A = 10 cycles S = std Ratings expressed in M = 20 % volts. To complete 7 (178 mm) reels burn-in at +25 C L = low and picofarads. The the three-digit L: Sn / Pb solder / Z = non- B = 10 cycles Case first two digits block, zeros 7 (178 mm) reel established at -55 C / +85 C Codes are the precede the C: 100 % tin / reliability S = 3 cycles Table. significant voltage rating. A 7 (178 mm) reels at +25 C figures. The third decimal point is H: 100 % tin / is the number of indicated by an R 7 (178 mm) reel zeros to follow. (6R3 = 6.3 V) Note We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting DIMENSIONS in inches millimeters Tantalum wire Nib indentifie s Anode (+) terminal J f H W W H1 CASE CODE L (MAX.) W H1 H F (REF.) D (REF.) J (MAX.) 0.295 0.243 + 0.012 / - 0.024 0.156 0.012 0.146 0.012 0.079 0.248 0.004 R 7.5 6.2 + 0.3 / - 0.6 4.0 0.3 3.7 0.3 2.0 6.3 0.1 Note The anode termination (D less B) will be a minimum of 0.010 (0.25 mm) Revision: 17-Jul-2018 Document Number: 40118 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 L D H1 H T96 www.vishay.com Vishay Sprague RATINGS AND CASE CODES CAP. (F) 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 10 R 15 RR 22 RR 33 RR 47 RR 68 R R 100 R R R 120 R R 150 R R 180 R R 220 R R R 330 R R R 390 R 470 R 680 R R STANDARD RATINGS STD. (S) LOW (L) MAX. DF MAX. DCL MAX. ESR MAX. ESR AVAILABLE CAPACITANCE CASE AT +25 C PART NUMBER AT +25 C AT +25 C AT +25 C RELIABILITY (F) CODE 120 Hz (A) 100 kHz 100 kHz LEVELS (%) ( ) ( ) 4 V AT +85 C 2.7 V AT +125 C DC DC 330 R T96R337(1)004(2)(3)(4)(5) 13.2 8 0.230 0.180 S, Z 6.3 V AT +85 C 4 V AT 125 C DC DC 180 R T96R187(1)6R3(2)(3)(4)(5) 10.8 8 0.230 0.180 S, Z 220 R T96R227(1)6R3(2)(3)(4)(5) 13.2 8 0.230 0.180 S, Z 390 R T96R397(1)6R3(2)(3)(4)(5) 23.4 8 0.230 0.145 S, Z 680 R T96R687(1)6R3(2)(3)(4)(5) 40.8 12 0.190 0.145 S, Z 10 V AT +85 C 7 V AT 125 C DC DC 100 R T96R107(1)010(2)(3)(4)(5) 10.0 8 0.240 0.175 S, Z 120 R T96R127(1)010(2)(3)(4)(5) 12.0 8 0.240 0.170 S, Z 150 R T96R157(1)010(2)(3)(4)(5) 15.0 8 0.230 0.165 S, Z 220 R T96R227(1)010(2)(3)(4)(5) 22.0 8 0.230 0.155 S, Z 330 R T96R337(1)010(2)(3)(4)(5) 33.0 8 0.230 0.155 S, Z 470 R T96R477(1)010(2)(3)(4)(5) 47.0 14 0.220 0.145 S, Z 680 R T96R687(1)010(2)(3)(4)(5) 68.0 14 0.190 0.145 S, Z 16 V AT +85 C 10 V AT +125 C DC DC 68 R T96R686(1)016(2)(3)(4)(5) 10.9 6 0.700 0.195 S, Z 180 R T96R187(1)016(2)(3)(4)(5) 28.8 8 0.230 0.155 S, Z 220 R T96R227(1)016(2)(3)(4)(5) 35.2 8 0.220 0.155 S, Z 330 R T96R337(1)016(2)(3)(4)(5) 52.8 14 0.210 0.155 S, Z 20 V AT +85 C 13 V AT +125 C DC DC 47 R T96R476(1)020(2)(3)(4)(5) 9.4 6 0.300 0.210 S, Z 100 R T96R107(1)020(2)(3)(4)(5) 20.0 8 0.240 0.170 S, Z 120 R T96R127(1)020(2)(3)(4)(5) 24.0 8 0.240 0.180 S, Z 150 R T96R157(1)020(2)(3)(4)(5) 30.0 8 0.240 0.175 S, Z Note Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, E, H, L (3) Reliability level (4) Surge current: A, B, S (5) ESR: L, S Revision: 17-Jul-2018 Document Number: 40118 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000