T97F336K050ESA Vishay

T97 www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT, Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case FEATURES High reliability Weibull failure rate gradin g available Available Surge current testing per MIL-PRF-55365 options available Available Ultra-low ESR Tin / lead (SnPb) termination available Mounting: surface mount Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE CHARACTERISTICS www.vishay.com/doc 40209 Capacitance Tolerance: 10 %, 20 % standard Operating Temperature: -55 C to +125 C Voltage Rating: 4 V to 75 V DC DC (above 85 C, voltage derating is required) Moisture Sensitivity Level 2a Capacitance Range: 10 F to 2200 F ORDERING INFORMATION T97 R 227 K 020 E S A TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE RATING TERMINATION / RELIABILITY SURGE CODE TOLERANCE AT +85 C PACKAGING LEVEL CURRENT (available options are series dependent) See This is expressed in K = 10 % This is expressed in E = Sn / Pb solder / A = 1.0 % A = 10 cycles Ratings pF. The first two M = 20 % volts. To complete the 7 (178 mm) reel Weibull at +25 C and digits are the three-digit block, L = Sn / Pb solder / B = 0.1 % B = 10 cycles (1) Case significant figures. zeros precede the 7 (178 mm), 1/2 reel Weibull at -55 C / Code The third is the voltage rating. A C = 100 % tin / S = 40 h +85 C table number of zeros decimal point is 7 (178 mm), reel burn-in S = 3 cycles to follow. indicated by an R H = 100 % tin / Z = non- at 25 C (6R3 = 6.3 V). 7 (178 mm), 1/2 reel established reliability Notes (1) Available on select ratings. See Standard Ratings table We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting Revision: 16-Jul-2019 Document Number: 40092 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 T97 www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters Tantalum wire J nib identifie s W anode (+) terminal L D H B A CASE CODE L (MAX.) W H A B D (REF.) J (MAX.) 0.299 0.173 0.016 0.079 0.051 0.012 0.181 0.024 0.252 0.004 V 7.6 4.4 0.4 2.0 max. 1.3 0.3 4.6 0.6 6.4 0.1 0.299 0.173 0.016 0.138 0.051 0.012 0.181 0.024 0.252 0.004 D 7.6 4.4 0.4 3.5 max. 1.3 0.3 4.6 0.6 6.4 0.1 0.299 0.173 0.016 0.157 0.016 0.051 0.012 0.181 0.024 0.252 0.004 E 7.6 4.4 0.4 4.0 0.4 1.3 0.3 4.6 0.6 6.4 0.1 0.299 0.238 0.016 0.142 0.016 0.051 0.012 0.181 0.024 0.244 0.004 R 7.6 6.0 0.4 3.6 0.4 1.3 0.3 4.6 0.6 6.2 0.1 0.299 0.238 0.016 0.185 0.016 0.055 0.016 0.181 0.024 0.244 0.004 F 7.6 6.0 0.4 4.7 0.4 1.4 0.4 4.6 0.6 6.2 0.1 0.299 0.238 0.016 0.236 0.016 0.055 0.016 0.181 0.024 0.244 0.004 Z 7.6 6.0 0.4 6.0 0.4 1.4 0.4 4.6 0.6 6.2 0.1 0.315 0.260 + 0.016 / - 0.024 0.142 0.016 0.051 0.012 0.197 0.024 0.260 0.004 M 8.0 6.6 + 0.4 / - 0.6 3.6 0.4 1.3 0.3 5.0 0.6 6.6 0.1 0.260 + 0.016 / - 0.024 0.205 0.016 0.055 0.016 0.197 0.024 0.260 0.004 0.315 H 8.0 6.6 + 0.4 / - 0.6 5.2 0.4 1.4 0.4 5.0 0.6 6.6 0.1 0.315 0.260 + 0.016 / - 0.024 0.252 0.016 0.056 0.017 0.196 0.025 0.259 0.004 N 8.0 6.6 + 0.4 / - 0.6 6.4 0.4 1.4 0.4 5.0 0.6 6.6 0.1 Note The anode termination (D less B) will be a minimum of 0.012 0.3 mm RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 40 V 50 V 63 V 75 V 10 DR 15 E / R R R / F 22 RF Z / H 33 FH / Z 47 R H / Z / N 68 R F 100 F F / H H 150 F 220 E R M 330 V E F H / F 470 V E E H H 680 E E R H 1000 E / R R F 1500 R F 2200 R Revision: 16-Jul-2019 Document Number: 40092 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000