Not for New Designs TC www.vishay.com Vishay Dale Through Hole Transformers Converter FEATURES Designed especially for low-power solid state circuits Designed for mounting on printed circuit boards Miniature size for minimum space High conversion efficiency from DC input to filtered DC output Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Power supply for gas discharge display, battery-operated portable instruments, operational amplifier power supplies MECHANICAL SPECIFICATIONS Coil: secured to bottom of case with epoxy ELECTRICAL SPECIFICATIONS Terminals: 0.025 0.635 mm square, solder plated Transformer power rating: 3 W Isolation, primary - secondary: 500 V, 60 Hz. Operating OPERATING TEMPERATURE RANGE characteristics may be varied to suit specific applications by -20 C to +80 C. Intended for use in enclosed commercial appropriate selection of circuit components and industrial applications STANDARD ELECTRICAL SPECIFICATIONS FREQUENCY CIRCUIT TEST SCHEMATIC INPUT REFERENCE MODEL OUTPUT EFFECTIVE CIRCUIT NUMBER (V ) (kHz) DC + 7.2 0.2 V at 150 MW DC TC-10-01B 3.6 7.5 50 % 1 1 - 7.2 0.2 V at 150 MW DC (1) TC-10-02B 5 200 10 V at 250 MW 11 50 % 2 4 DC 200 10 V at 250 MW DC TC-10-03B 5 + 15 0.4 V at 125 MW 11 60 % 2 2 DC - 15 0.4 V at 125 MW DC + 15 0.4 V at 500 MW DC TC-10-04B 5 8 75 % 3 1 - 15 0.4 V at 500 MW DC + 170 5.1 V at 850 MW DC TC-10-05B 5 11 75 % 4 5 + 32 1.0 V at 510 MW DC (1) (1) TC-10-06B 5 + 35 1.0 V at 610 MW 11 70 % 4 5 DC TC-10-07B 7.5 16.3 0.4 V at 330 MW 7 65 % 5 1 DC TC-10-08B 12 15 0.4 V at 1 W 7.5 72 % 3 1 DC TC-10-09B 12 160 5 V at 1.5 W 10 75 % 6 3 DC TC-10-10B 12 14.2 0.7 V at 3 W 10 70 % 5 1 DC TC-10-11B 12 + 24 0.5 V at 2 W 10 80 % 5 1 DC 170 5.1 V at 850 MW DC TC-10-12B 24 11 70 % 4 5 32 1.0 V at 510 MW DC Note (1) Specifications relate to transformer when operated in applicable test circuit and at specified load power. Revision: 08-Aug-16 Document Number: 34077 1 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000Not for New Designs TC www.vishay.com Vishay Dale TEST CIRCUITS TEST CIRCUIT NUMBER 1 TEST CIRCUIT NUMBER 2 + 200 V 470 1 7 1N4004 1 8 (4) 2N4400 1N4148 (4) RL 4.7 F 2N4401 0.22 F 10 F - + 9 2 8 INPUT 0.1 F + - 4 1 k 10 3.9 k INPUT 1N4150 (4) 2 10 2N4400 5 3 9 1 k 2N4401 - 7.2 V + 7.2 V 4 0.1 F 3 6 0.003 F 5 - 15 V + 15 V 3.3 F 1 k 3.3 F 1 k 1N4148 470 6 10 F 10 F RL RL TEST CIRCUIT NUMBER 3 TEST CIRCUIT NUMBER 4 1 7 1 7 1N4004 (4) 1N4150 (4) Q (1) 2.2 F RL + 2 - + - 2 8 INPUT 8 INPUT RS RS Q 3 9 3 9 1N4150 (4) RF + 15 V - 15 V 4 4 0.47 F RL 1N4150 RF 5 5 4 F RL 4 F RL RF 10 6 6 TEST CIRCUIT NUMBER 5 TEST CIRCUIT NUMBER 6 1 1 D 7 Q (2) 2N2102 (3) 8 1N4004 (4) - + - + 2 2 INPUT INPUT 8 0.2 F 2.2 k RS C1 RL RL Q 2N2102 3 3 0.003 F D 4 9 4 9 5 RF 5 180 6 6 Notes Omit winding 4, 5, 6 and associated circuit to test TC-10-028. Omit winding 7, 8 and associated circuit to test TC-10-068. (1) RC network may be required to suppress spurious oscillations. R = 100 , C = 0.001 F. (2) RC network may be required to suppress spurious oscillations. (3) RC network may be required to suppress spurious oscillations. R = 10 , C = 0.004 F. Revision: 08-Aug-16 Document Number: 34077 2 For technical questions, contact: magnetics vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000