TCN
www.vishay.com
Vishay Techno
Thick Film Capacitor Networks,
Single-In-Line, Conformal Coated SIP
FEATURES
Isolated and bussed schematics available
Available
NP0 or X7R capacitors for line terminator
Wide operating temperature range (- 55 C to
125 C)
Epoxy based conformal coating
Available
Solder coated copper terminals
Solderability per MIL-STD-202 method 208E
Marking resistance to solvents per MIL-STD-202
method 215
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
(2)
CAPACITANCE RANGE
CAPACITANCE TOLERANCE CAPACITANCE VOLTAGE
MODEL SCHEMATIC
(1)
% V
NP0 X7R DC
01 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50
TCN 02 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50
09 33 pF to 3900 pF 470 pF to 0.1 F 10, 20 50
Notes
(1)
NP0 capacitors may be substituted for X7R capacitors.
(2)
Tighter tolerances available on request.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TCN0801N101KTB (preferred part number format)
T CN 0801 N 1 0 1K T B
GLOBAL CAPACITANCE
PIN COUNT SCHEMATIC CHARACTERISTICS TOLERANCE TERMINAL FINISH PACKAGING
MODEL VALUE
TCN 06 to 12 pin 01 N = NP0 (In picofarads) K = 10 % T = Sn90/Pb10 B = Bulk
available 02 X = X7R 2 digit significant figure, M = 20 % C = Sn95.5/
06 = 6 pin 09 followed by a multiplier Ag3.9/
08 = 8 pin 101 = 100 pF Cu0.6
12 = 12 pin 392 = 3000 pF
104 = 0.1 F
Historical Part Numbering: TCN0801101KS10 (will continue to be accepted)
TCN 08 01 101 K S10
HISTORICAL CAPACITANCE
PIN COUNT SCHEMATIC TOLERANCE TERMINAL FINISH
MODEL VALUE
Note
For additional information on packaging, refer to the Through-hole Network Packaging document (www.vishay.com/doc?31542).
Revision: 14-Jan-13 Document Number: 68003
1
For technical questions, contact: te1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000TCN
www.vishay.com
Vishay Techno
SCHEMATICS
Schematic 01 Schematic 02 Schematic 09
CC C
CC C C C
CC C C
1 2 3 4 n-1 n 1 2 3 4 n-1 n 1n2 3 4 n-1
Note
Custom schematics available.
DIMENSIONS in inches (millimeters)
A Max.
0.130
(3.30)
Max.
C Pin #1 Identifier
Max.
0.125
0.015
(Seating
(3.18 0 .381)
Plane)
0.020 0.002
(0.508 0.051)
0.100 0.005 0.010
0.002
(0.254
0.051)
(2.54 0.127)
Non-Cumulative
B
A B C
NUMBER OF PINS
(Max.) 0.005 (0.127) (Max.)
6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89)
7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89)
8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89)
9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89)
10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89)
11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89)
12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89)
Revision: 14-Jan-13 Document Number: 68003
2
For technical questions, contact: te1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000