TFPTL15L3901FL2B Vishay

TFPTL www.vishay.com Vishay Radial Leaded PTC - Nickel Thin Film Linear Thermistors FEATURES Nickel thin film PTC element High stability over the entire temperature range cUL recognized component: File E148885 Epoxy coated UL 94 V-0 approved Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Temperature measurement, sensing, compensation, and control in industrial and consumer applications. For on-board or remote sensing. DESCRIPTION MARKING These thermistors are based on a Nickel thin film resistor The thermistors are laser marked with value and tolerance technology as thermal sensitive material. The device reference on an epoxy based coating. consists of a thin film ceramic chip with two tinned copper 2 (Example: 102F = 10 x 10 = 1000 1 %) clad steel wire leads. MOUNTING By soldering or welding in any position. QUICK REFERENCE DATA PARAMETER VALUE UNIT DESCRIPTION TFPTL10 TFPTL15 (2) Resistance value at 25C 100 to 1K 100 to 5K (2) Tolerance on R -value 1 5 % 25 TCR at 25 C 4110 ppm/K (1) Tolerance on TCR at 25 C 400 ppm/K Operating temperature range: at rated power -55 to+70 C at zero dissipation -55 to+150 Response time (in oil) 1.1 1.6 s Dissipation factor (for information only) 2.9 3.4 mW/K Maximum rated power at 70 C (P ) 75 100 mW 70 (3) Maximum working voltage RCWV 30 40 V Climatic category (LCT/UCT/days) 55/150/56 - Weight 0.12 0.14 g Notes (1) Contact Vishay if closer TCR lot tolerance is desired (2) Other R -values and tolerances are available upon request 25 (3) Rated continuous working voltage is maximum working voltage or P x R, whichever is less 70 STANDARD RESISTANCE VALUES at 25 C in 100 150 220 330 470 680 1K 1.5K 2.2K 3.3K 4.7K 120 180 270 390 560 820 1.2K 1.8K 2.7K 3.9K 5.0K Note Other R -values and tolerances are available upon request 25 GLOBAL PART NUMBER INFORMATION Global Part Numbering: TFPTL10L1001FL2B T F P T L 1 0 L 1001 F L 2 B PRODUCT RESISTANCE LEAD SIZE CHARACTERISTICS TOLERANCE PACKAGING TYPE VALUE CONFIGURATION TFPT 10 L = Linear 1000 = 100R F = 1 % L2 B = Bulk (500 pieces) Leaded 15 1001 = 1K J = 5 % H5 U = Ammopack (2500 pieces) 5001 = 5K T = T/R (4000 pieces) Revision: 25-Oct-11 Document Number: 33027 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TFPTL www.vishay.com Vishay DIMENSIONS Wb T Wb H H SH 471J 102F SH L L d F F L2 H5 Component outline for Component outline for lead spacing 2.5 mm 0.8 mm lead spacing 5.0 mm 0.8 mm (straight leads) (flat bent leads) TFPTL DIMENSIONS in millimeters SIZE L10 SIZE L15 L2 H5 L2 H5 Wb 3.6 4.0 max. H 3.5 3.8 max. SH (seating height) 5.0 6.2 5.2 6.5 max. d 0.5 10 % L 25 min. F 2.5 0.8 5.0 0.8 2.5 0.8 5.0 0.8 T 2.2 2.4 max. Notes Bulk packed types have a standard lead length L = 25 mm minimum Thickness is defined as T Power Derating 110 100 90 80 70 60 50 40 30 20 10 0 - 75 - 50 - 25 0 25 50 75 100 125 150 175 Temperature in C Note Zero power is considered as measuring power max. 1 % of rated power P 70 Revision: 25-Oct-11 Document Number: 33027 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Power in % of P 70