TH4B106K010C1800 Vishay

333 3 TH4 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT Molded Case, HI-TMP High Temperature 175 C, Automotive Grade FEATURES Operating temperature up to 175 C with 50 % voltage derating AEC-Q200 qualified 100 % surge current tested RoHS-compliant terminations available: ADDITIONAL RESOURCES matte tin (all cases), gold (D case) Standard EIA 535BAAC case sizes 3D Models Calculators Related Infographics Did You Moisture sensitivity level 1 Documents Know Material categorization: for definitions of compliance T please see www.vishay.com/doc 99912 Technical Notes APPLICATIONS PERFORMANCE / ELECTRICAL Automotive CHARACTERISTICS www.vishay.com/doc 40215 Industrial Operating Temperature: -55 C to +175 C High temperature Capacitance Range: 10 F to 100 F Capacitance Tolerance: 10 %, 20 % Voltage Range: 6.3 V to 35 V DC DC Note For recommended voltage derating guidelines see Typical Performance Characteristics ORDERING INFORMATION TH4 C 226 K 016 C 1000 TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION AND ESR CODE TOLERANCE RATING AT +85 C PACKAGING See This is expressed in K = 10 % This is expressed in V. Matte tin Maximum Ratings picofarads. The first M = 20 % To complete the 100 kHz ESR C = 7 (178 mm) reel and Case two digits are the three-digit block, zeros 0500 = 500 m D = 13 (330 mm) reel Codes significant figures. precede the voltage 5000 = 5.0 V = 7 (178 mm) reel, table The third is the rating. A decimal point 10R0 = 10.0 dry pack number of zeros to is indicated by an R U = 13 (330 mm) reel, follow. (6R3 = 6.3 V) dry pack Notes We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating Dry pack as specified in J-STD-033 Revision: 21-Oct-2019 Document Number: 40152 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D TH4 www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters L W H T W Glue Pad T (MIN.) H Glue Pad P CASE CODE EIA SIZE L W H P T T (MIN.) W H 0.138 0.008 0.110 0.008 0.075 0.008 0.031 0.012 0.087 0.004 0.028 B 3528-21 3.5 0.20 2.8 0.20 1.9 0.20 0.80 0.30 2.2 0.10 0.70 0.236 0.012 0.126 0.012 0.098 0.012 0.051 0.012 0.087 0.004 0.039 C 6032-28 6.0 0.30 3.2 0.30 2.5 0.30 1.3 0.30 2.2 0.10 1.0 0.287 0.012 0.169 0.012 0.110 0.012 0.051 0.012 0.094 0.004 0.039 D 7343-31 7.3 0.30 4.3 0.30 2.8 0.30 1.3 0.30 2.4 0.10 1.0 0.287 0.012 0.169 0.012 0.157 0.012 0.051 0.012 0.094 0.004 0.039 E 7343-43 7.3 0.30 4.3 0.30 4.0 0.30 1.3 0.30 2.4 0.10 1.0 Note Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option) RATINGS AND CASE CODES F 6.3 V 10 V 16 V 35 V 50 V 4.7 D (0.9) 10 B (1.8) B (1.8) B (2.0) 22 B (1.5) B (1.6) C (1.4) B (1.9) C (1.4, 1.0) D (0.8, 0.6) D (0.5) 47 C (0.8) C (0.5) C (0.8) D (0.4, 0.7) 100 E (0.6) MARKING Indicates 175 C temperature Voltage Capacitance, F 22 B10 Polarity band (+) 2 XX Date code Vishay marking Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. The Vishay identification marking is included if space permits. Vishay marking (circled 2) may show additives in the form of short lines, depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility designation. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Call the factory for further explanation. Revision: 21-Oct-2019 Document Number: 40152 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000