TH5 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, HI-TMP , Very High Temperature 200 C FEATURES Operating temperature up to +200 C Category voltage at +200 C: same as rated voltage (RV) at 25 C to 85 C 500 h continuous operation at RV Gold plated terminations 100 % surge current tested Standard EIA 535BAAC case sizes Moisture sensitivity level 1 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS PERFORMANCE / ELECTRICAL Oil and petroleum CHARACTERISTICS High temperature sensing and drilling systems Operating Temperature: -55 C to +200 C Industrial Capacitance Range: 4.7 F to 100 F Safety critical industrial tools and products Capacitance Tolerance: 10 %, 20 % High temperature extended activities Voltage Range: 5 V to 24 V DC DC High temperature engines Electronic sensors ORDERING INFORMATION TH5 E 106 K 021 B 1000 TYPE CASE CAPACITANCE CAPACITANCE CATEGORY VOLTAGE TERMINATION / ESR CODE TOLERANCE AT -55 C TO +200 C PACKAGING See Ratings This is expressed K = 10 % This is expressed Gold Maximum and Case in picofarads. M = 20 % in V. To complete the 100 kHz ESR A = 7 (178 mm) reel Codes table The first two three-digit block, 0500 = 500 m B = 13 (330 mm) reel digits are the zeros precede the 5000 = 5 G = 7 (178 mm) reel significant voltage rating. 10R0 = 10.0 Q = 7 (178 mm) partial reel (1) figures. The third Other is the number of zeros to follow. Note (1) Other termination on request DIMENSIONS in inches millimeters L W T W H T H Glue Pad (MIN.) Glue Pad P CASE CODE EIA SIZE L W H P T T (MIN.) W H 0.287 0.012 0.169 0.012 0.110 0.012 0.051 0.012 0.094 0.004 0.039 D 7343-31 7.3 0.30 4.3 0.30 2.8 0.30 1.3 0.30 2.4 0.10 1.0 0.287 0.012 0.170 0.012 0.158 0.012 0.051 0.012 0.095 0.004 0.039 E 7343-43 7.3 0.30 4.3 0.30 4.0 0.30 1.3 0.30 2.4 0.10 1.0 Note Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option). Note TH5 series capacitors have been designed for, and tested at category voltage at +200 C for 500 h. As with all Tantalum capacitors, reliability and life time may be extended by application of lower voltage. Revision: 28-Sep-16 Document Number: 40146 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TH5 www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 5 V 8 V 21 V 24 V 4.7 E (2.50) 10 E (1.00, 0.50) 22 D (0.50), E (0.50) 100 E (0.25) Note ESR limit (in ) is shown in parenthesis. CONSTRUCTION AND MARKING Gold Termination Capacitance Voltage Epoxy encapsulation Silver adhesive Polarity bar 10u21 2 B1 Date code Vishay marking Anode polarity bar TH5 Standard Marking Case Sizes D and E Marking: MnO / carbon / 2 Capacitor marking includes an anode (+) polarity band, silver coating capacitance in microfarads and the voltage rating. Solderable anode Solderable Leadframe cathode termination The Vishay identification is included if space permits. A Sintered termination manufacturing date code is marked on all capacitors. Call tantalum the factory for further explanation. STANDARD RATINGS MAX. ESR MAX. DCL TYPICAL DCL MAX. DF MAX. RIPPLE CAPACITANCE CASE AT +25 C PART NUMBER AT +25 C AT +200 C AT +25 C 100 kHz (F) CODE 100 kHz (A) (A) (%) I (A) RMS ( ) 5 V AT +200 C DC 100 E TH5E107(1)005(2)0250 5.0 300 8 0.250 0.81 8 V AT +200 C DC 22 D TH5D226(1)008(2)0500 6.0 360 6 0.500 0.55 22 E TH5E226(1)008(2)0500 6.0 360 6 0.500 0.57 21 V AT +200 C DC 10 E TH5E106(1)021(2)1000 2.1 120 6 1.000 0.41 10 E TH5E106(1)021(2)0500 2.1 120 6 0.500 0.57 24 V AT +200 C DC 4.7 E TH5E475(1)024(2)2500 1.1 60 10 2.500 0.26 Note Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging: A, B, G, Q STANDARD PACKAGING QUANTITY UNITS PER REEL CASE CODE 13 FULL REEL 7 FULL REEL 7 HALF REEL 7 PARTIAL REEL D 2500 500 250 100 E 1500 400 200 100 Note TH5 series capacitors have been designed for, and tested at category voltage at +200 C for 500 h. As with all Tantalum capacitors, reliability and life time may be extended by application of lower voltage. Revision: 28-Sep-16 Document Number: 40146 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000