TL3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors, TANTAMOUNT , Molded Case, Very Low DCL FEATURES DC leakage at 0.005 CV Low ESR options Available 100 % surge current tested (B, C, D and E case sizes) Available Improved reliability: 0.50 %/1000 h, 85 C, rated voltage Available Molded case available in five case codes Terminations: 100 % matte tin, standard tin/lead available Compliant terminations Compatible with High Volume automatic pick and place equipment Moisture sensitivity level 1 Standard EIA 535BAAC case size (A through E) Material categorization: For definitions of compliance PERFORMANCE/ELECTRICAL please see www.vishay.com/doc 99912 CHARACTERISTICS Note www.vishay.com/doc 40088 * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For Operating Temperature: - 55 C to + 125 C example, parts with lead (Pb) terminations are not RoHS-compliant. (above 85 C voltage derating is required) Please see the information/tables in this datasheet for details. Capacitance Range: 0.1 F to 470 F APPLICATIONS Capacitance Tolerance: 10 %, 20 % Industrial Voltage Rating: 4 V to 50 V Telecom infrastructure Consumer Medical General purpose ORDERING INFORMATION TL3 D 107 K 010 C 0100 TYPE CASE CODE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION ESR TOLERANCE RATING AT + 85 C AND PACKAGING See Ratings This is expressed K = 10 % This is expressed in C = Matte tin/ Maximum 100 kHz and Case in picofarads. The M = 20 % volts. To complete 7 (178 mm) reels ESR in m. Codes table. first two digits are the three-digit block, D = Matte tin/ See note below. significant figures. zeros precede the 13 (330 mm) reels The third is the voltage rating. E = Tin/lead/ number of zeros A decimal point is 7 (178 mm) reels to follow. indicated by an R F = Tin/lead/ (6R3 = 6.3 V). 13 (330 mm) reels Notes We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. The EIA and CECC standards for low ESR solid tantalum chip capacitors, allow delta ESR of 1.25 times the datasheet limit after mounting. Dry pack is available per request, contact regional marketing. Revision: 27-Jun-13 Document Number: 40154 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TL3 www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters L W T W H Glue Pad T (MIN.) H Glue Pad P CASE CODE EIA SIZE L W H P T T (MIN.) W H 0.126 0.008 0.063 0.008 0.063 0.008 0.031 0.012 0.047 0.004 0.028 A 3216-18 3.2 0.20 1.6 0.20 1.6 0.20 0.80 0.30 1.2 0.10 0.70 0.138 0.008 0.110 0.008 0.075 0.008 0.031 0.012 0.087 0.004 0.028 B 3528-21 3.5 0.20 2.8 0.20 1.9 0.20 0.80 0.30 2.2 0.10 0.70 0.236 0.012 0.126 0.012 0.098 0.012 0.051 0.012 0.087 0.004 0.039 C 6032-28 6.0 0.30 3.2 0.30 2.5 0.30 1.3 0.30 2.2 0.10 1.0 0.287 0.012 0.169 0.012 0.110 0.012 0.051 0.012 0.094 0.004 0.039 D 7343-31 7.3 0.30 4.3 0.30 2.8 0.30 1.3 0.30 2.4 0.10 1.0 0.287 0.012 0.169 0.012 0.157 0.012 0.051 0.012 0.094 0.004 0.039 E 7343-43 7.3 0.30 4.3 0.30 4.0 0.30 1.3 0.30 2.4 0.10 1.0 Note Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option). RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.10 A (20.00, 10.00) A (19.00, 10.00) A (17.00, 10.00)/ 0.15 A (18.00, 6.00) B (14.00, 9.00) 0.22 A (15.00, 6.00) B (12.00, 8.50) 0.33 A (14.00, 10.00) A (13.00, 6.00) B (10.00, 4.50) A (10.00, 4.00)/ B (8.40, 4.00)/ 0.47 A (12.00, 9.00) A (12.00, 9.00) B (8.00, 2.50) C (6.70, 1.80) 0.68 A (11.00, 8.00) A (10.00, 8.00) B (7.00, 5.00) B (6.50, 2.50) C (5.90, 1.60) A (7.60, 4.00)/ A (7.50, 6.00)/ B (6.70, 2.00)/ 1.0 A (9.30, 6.00) A (9.30, 6.00) A (8.40, 5.50) B (5.00, 2.00) B (5.00, 2.00) C (4.60, 1.60) B (4.20, 3.00)/ C (3.40, 1.50)/ 1.5 A (8.00, 6.00) A (8.00, 6.00) A (8.00, 6.00) B (4.60, 2.50) B (4.60, 2.00) C (3.80, 1.50) D (2.90, 1.00) A (6.30, 4.00)/ A (5.90, 4.00)/ B (3.80, 2.30)/ C (2.90, 1.50)/ 2.2 A (7.60, 6.00) A (7.60, 6.00) B (4.60, 2.50) B (3.80, 2.30)/ B (3.50, 1.50) C (2.90, 0.90) D (2.10, 0.80) C (2.90, 1.00) B (3.10, 1.50)/ B (3.50, 1.50)/ 3.3 A (7.60, 4.00) A (6.30, 5.00) B (3.50, 2.50) B (3.50, 2.00) B (3.00, 1.30) D (1.70, 0.80) C (2.30, 1.00) C (2.10, 0.70) A (5.50, 3.50)/ A (5.50, 3.50)/ A (5.00, 3.00)/ A (3.50, 2.50)/ B (2.80, 1.50)/ C (1.90, 0.60)/ 4.7 A (6.30, 3.50) B (2.90, 1.00)/ D (1.20, 0.60) B (3.40, 1.80) B (3.40, 1.50) B (2.90, 1.50) C (2.0, 0.525) D (1.30, 0.60) C (2.30, 0.60) C (1.70, 0.50)/ C (1.80, 0.900)/ 6.8 B (4.50, 2.00) B (3.40, 1.20) B (2.90, 1.20) C (1.90, 0.60) C (1.90, 0.55) E (0.90, 0.54) D (1.20, 0.35) D (1.10, 0.30) A (3.00, 1.70)/ B (2.30, 1.30)/ A (3.40, 2.00)/ B (2.50, 1.00)/ C (1.60, 0.85)/ 10 B (3.50, 1.20) B (2.90, 1.00) B (2.80, 0.80)/ C (1.50, 0.45)/ E (0.80, 0.55) C (1.80, 0.55) C (1.70, 0.45) D (0.80, 0.30) C (1.80, 0.45) D (1.00, 0.30) A (2.90, 2.00)/ C (1.20, 0.425)/ 15 B (2.90, 1.20) C (1.80, 0.60) B (2.00, 0.80) D (0.90, 0.30) D (0.80, 0.30) C (1.80, 0.50) D (0.80, 0.25) A (2.90, 2.00)/ B (1.90, 1.00)/ C (1.20, 0.375)/ D (0.70, 0.40)/ 22 A (2.50, 1.50) D (0.70, 0.20) C (1.80, 0.60) D (0.80, 0.25) D (0.70, 0.225) E (0.60, 0.300) B (1.90, 0.60)/ B (1.80, 0.50)/ A (2.90, 1.50)/ B (1.90, 0.60)/ D (0.70, 0.30)/ 33 C (1.40, 0.35)/ C (1.10, 0.30)/ D (0.70, 0.20) C (1.80, 050) C (1.50, 0.40) E (0.60, 0.20) D (0.80, 0.25) D (0.70, 0.225) B (2.00, 0.55)/ B (1.80, 0.60)/ B (2.50, 0.60)/ C (1.00, 0.30)/ D (0.70, 0.20)/ D (0.70, 0.35)/ 47 C (1.40, 0.30)/ C (1.10, 0.30)/ C (1.80, 0.40) D (0.70, 0.15) E (0.60, 0.15) E (0.60, 0.30) D (0.80, 0.20) D (0.70, 0.20) D (0.70, 0.175)/ 68 D (0.80, 0.175) D (0.70, 0.20) D (0.70, 0.15) D (0.60, 0.15) E (0.60, 0.15) B (1.80, 0.45)/ B (1.70, 0.70)/ C (0.90, 0.20)/ D (0.60, 0.125)/ 100 E (0.50, 0.15) D (0.70, 0.175) D (0.70, 0.14) D (0.60, 0.10) E (0.60, 0.10) D (0.60, 0.125)/ 150 D (0.60, 0.15) D (0.60, 0.10) E (0.50, 0.15) E (0.50, 0.10) C (0.70, 0.30)/ D (0.60, 0.36)/ 220 D (0.60, 0.10)/ E (0.50, 0.10) E (0.50, 0.10) 330 E (0.50, 0.10) E (0.50, 0.10) E (0.50, 0.10) 470 E (0.50, 0.20) Revision: 27-Jun-13 Document Number: 40154 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000