TMPG06-10A thru TMPG06-43A www.vishay.com Vishay General Semiconductor PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES Available in uni-directional polarity only 400 W peak pulse power capability with a 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % Excellent clamping capability Very fast response time MPG06 Low incremental resistance Solder dip 275 C max. 10 s, per JESD 22-B106 AEC-Q101 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Use in sensitive electronics protection against voltage PRIMARY CHARACTERISTICS transients induced by inductive load switching and lighting V 10 V to 43 V BR on ICs, MOSFET, signal lines of sensor units for consumer, V 8.55 V to 36.8 V WM computer, industrial, automotive, and telecommunication. P 400 W PPM P 1.0 W D MECHANICAL DATA I 40 A FSM Case: MPG06, molded epoxy over passivated junction T max. 185 C J Molding compound meets UL 94 V-0 flammability rating Polarity Uni-directional Base P/NHE3 X - RoHS-compliant, AEC-Q101 qualified Package MPG06 (X denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Peak pulse power dissipation with a 10/1000 s waveform (fig. 1) P 400 W PPM (1)(2) Peak pulse current with a 10/1000 s waveform (fig. 3) I See next table A PPM Power dissipation on infinite heatsink at T = 75 C (fig. 5) P 1.0 W L D (2) Peak forward surge current 8.3 ms single half sine-wave I 40 A FSM (2) Maximum instantaneous forward voltage at 25 A V 3.5 V F Operating junction and storage temperature range T , T -65 to +185 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Revision: 04-Nov-16 Document Number: 88404 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000TMPG06-10A thru TMPG06-43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM TEST REVERSE MAXIMUM MAXIMUM VOLTAGE STAND-OFF REVERSE PEAK CURREN LEAKAGE CLAMPING TEMPERATURE (1) V AT I VOLTAGE LEAKAGE PULSE BR T DEVICE TYPE T AT V VOLTAGE COEFFICIENT WM (V) V AT V CURRENT WM WM I T = 150 C AT I OF V T J PPM BR (2) (V) I I D PPM (mA) (A) V (V) (%/C) C MIN. MAX. (A) (A) TMPG06-10A 9.50 10.5 1.0 8.55 5.0 20.0 27.6 14.5 0.073 TMPG06-11A 10.5 11.6 1.0 9.40 2.0 10.0 25.6 15.6 0.075 TMPG06-12A 11.4 12.6 1.0 10.2 1.0 5.0 24.0 16.7 0.078 TMPG06-13A 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TMPG06-15A 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TMPG06-16A 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TMPG06-18A 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TMPG06-20A 19.0 21.0 1.0 17.0 1.0 5.0 14.4 27.7 0.090 TMPG06-22A 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TMPG06-24A 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TMPG06-27A 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TMPG06-30A 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TMPG06-33A 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TMPG06-36A 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TMPG06-39A 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TMPG06-43A 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 ORDERING INFORMATION (Example) PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE (1) TMPG06-10AHE3 A/C 0.218 C 5500 13 diameter paper tape and reel Note (1) AEC-Q101 qualified Revision: 04-Nov-16 Document Number: 88404 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000