TNPW06031K74BEEA Vishay

TNPW e3 www.vishay.com Vishay High Stability Thin Film Flat Chip Resistors FEATURES Superior moisture resistivity (85 C 85 % RH) Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at 70 C) AEC-Q200 qualified Single lot date code (optional) Advanced sulfur resistance verified according to ASTM B 809 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS TNPW e3 precision thin film flat chip resistors are the perfect Automotive choice for most fields of modern electronics where highest Industrial equipment reliability and stability is of major concern. Typical applications include automotive, industrial, test an d Test and measuring equipment measuring equipment, and medical equipment. Medical equipment TECHNICAL SPECIFICATIONS DESCRIPTION TNPW0201 e3 TNPW0402 e3 TNPW0603 e3 TNPW0805 e3 TNPW1206 e3 TNPW1210 e3 Imperial size 0201 0402 0603 0805 1206 1210 Metric size code RR0603M RR1005M RR1608M RR2012M RR3216M RR3225M Resistance range 22 to 40 k 10 to 100 k 1 to 332 k 1 to 1 M 1 to 2 M 10 to 3.01 M Resistance tolerance 0.5 % 0.1 % 1 % 0.5 % 0.1 % Temperature coefficient 25 ppm/K 50 ppm/K 25 ppm/K 15 ppm/K 10 ppm/K (1) Rated dissipation, P 0.075 W 0.100 W 0.125 W 0.200 W 0.400 W 0.500 W 70 Operating voltage, 25 V 50 V 75 V 150 V 200 V 200 V U AC or DC max. RMS Permissible film 155 C (1) temperature, F max. Operating temperature range -55 C to 155 C (1) Internal thermal resistance - 90 K/W 63 K/W 38 K/W 32 K/W - Permissible voltage against ambient (insulation): 1 min U 50 V 75 V 100 V 200 V 300 V 300 V ins -9 Failure rate: FIT 0.1 x 10 /h observed Note (1) Please refer to APPLICATION INFORMATION APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Revision: 23-Sep-2021 Document Number: 28758 1 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TNPW e3 www.vishay.com Vishay MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION OPERATION MODE STANDARD POWER TNPW0201 e3 0.050 W 0.075 W TNPW0402 e3 0.063 W 0.100 W TNPW0603 e3 0.100 W 0.125 W Rated dissipation, P 70 TNPW0805 e3 0.125 W 0.200 W TNPW1206 e3 0.250 W 0.400 W TNPW1210 e3 0.330 W 0.500 W Operating temperature range -55 C to 125 C -55 C to 155 C Permissible film temperature, 125 C 155 C F max. TNPW0201 e3 22 to 40 k 22 to 40 k TNPW0402 e3 10 to 100 k 10 to 100 k TNPW0603 e3 1 to 332 k 1 to 332 k TNPW0805 e3 1 to 1 M 1 to 1 M Max. resistance change at P for resistance range, 70 TNPW1206 e3 1 to 2 M 1 to 2 M R/R after: TNPW1210 e3 10 to 3.01 M 10 to 3.01 M 1000 h 0.05 % 0.10 % 8000 h 0.10 % 0.20 % 225 000 h 0.30 % 0.60 % Note The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc 28844) for information on the general nature of thermal resistance Revision: 23-Sep-2021 Document Number: 28758 2 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000