TNPW0805330RDETA Vishay

TNPW www.vishay.com Vishay Lead (Pb)-Bearing High Stability Thin Film Chip Resistors FEATURES Metal film layer on high quality ceramic SnPb termination plating, Pb content > 6 % Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at 70 C) Low temperature coefficient and tight tolerances ( 0.1 % 10 ppm/K) Single lot date code available APPLICATIONS Military Avionics Industrial TNPW High Stability Thin Film Chip Resistors are the perfect choice for most fields of modern electronics where lead (Pb)-bearing terminations are mandatory and reliability and stability are of major concern. TECHNICAL SPECIFICATIONS (1) DESCRIPTION TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 Imperial size 0402 0603 0805 1206 1210 Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M Resistance range 10 to 100 k 10 to 332 k 10 to 1 M 10 to 2 M 10 to 3.01 M Resistance tolerance 1 % 0.5 % 0.1 % Temperature coefficient 50 ppm/K 25 ppm/K 15 ppm/K 10 ppm/K Climatic category (LCT/UCT/days) 55/125/56 55/125/56 55/125/56 55/125/56 55/125/56 (2) Rated dissipation, P 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W 70 Operating voltage, U AC or DC 50 V 75 V 150 V 200 V 200 V max. RMS Permissible film temperature, 155 C F max. Operating Temperature Range -55 C to 125 C (155 C) (3) Thermal resistance 870 K/W 550 K/W 440 K/W 220 K/W 170 K/W Insulation voltage: U 1 min 75 V 100 V 200 V 300 V 300 V ins Continuous 75 V 75 V 75 V 75 V 75 V -9 Failure rate: FIT 0.3 x 10 /h observed Notes (1) The detail specification EN140401-801 does not cover this product size. (2) Rated voltage P x R . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. (3) Measuring conditions in accordance with EN 140401-801. Revision: 24-Jan-14 Document Number: 31006 1 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TNPW www.vishay.com Vishay TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TCR TOLERANCE RESISTANCE E-SERIES 50 ppm/K 1 % E24 E96 10 to 100 k 0.5 % 25 ppm/K TNPW0402 0.1 % E24 E192 15 ppm/K 0.1 % 47 to 100 k 10 ppm/K 0.1 % 50 ppm/K 1 % E24 E96 0.5 % 10 to 332 k 25 ppm/K TNPW0603 0.1 % E24 E192 15 ppm/K 0.1 % 47 to 332 k 10 ppm/K 0.1 % 50 ppm/K 1 % E24 E96 0.5 % 10 to 1.0 M 25 ppm/K TNPW0805 0.1 % E24 E192 15 ppm/K 0.1 % 47 to 1.0 M 10 ppm/K 0.1 % 50 ppm/K 1 % E24 E96 0.5 % 10 to 2.0 M 25 ppm/K TNPW1206 0.1 % E24 E192 15 ppm/K 0.1 % 47 to 2.0 M 10 ppm/K 0.1 % 50 ppm/K 1 % E24 E96 10 to 3.01 M 0.5 % 25 ppm/K TNPW1210 0.1 % E24 E192 15 ppm/K 0.1 % 47 to 2.13 M 10 ppm/K 0.1 % PART NUMBER AND PRODUCT DESCRIPTION Part Number: TNPW12061K32DETA T N P W 1 2 061 K 3 2D ET A TYPE/SIZE RESISTANCE TOLERANCE TCR PACKAGING SPECIAL TNPW0402 R = Decimal B = 0.1 % H = 50 ppm/K TP Blank = Standard TNPW0603 K = Thousand D = 0.5 % E = 25 ppm/K 0H = Single lot TD TNPW0805 M = Million F = 1.0 % X = 15 ppm/K date code CN TNPW1206 (4 digits) Y = 10 ppm/K TA TNPW1210 TC Product Description: TNPW-1206 1.32K 0.5 % T-9 RT1 TNPW-1206 1.32K 0.5 % T-9 RT1 TYPE/SIZE RESISTANCE TOLERANCE TCR PACKAGING SPECIAL TNPW-0402 Examples: 0.1 % T-2 = 50 ppm/K TP1 Blank = Standard 1K32 = 1320 T-9 = 25 ppm/K BV20545 = TNPW-0603 0.5 % RT7 99.68K = 99 680 T-10 = 15 ppm/K Single lot date code TNPW-0805 1.0 % R52 360 = 360 T-13 = 10 ppm/K TNPW-1206 RT1 TNPW-1210 RT6 Notes The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. Revision: 24-Jan-14 Document Number: 31006 2 For technical questions, contact: thinfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000