TNPW08053K00FETA Vishay

TNPW Vishay High Stability Thin Film Chip Resistors FEATURES Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at 70 C) Low temperature coefficient and tight tolerances ( 0.1 % 10 ppm/K) Metal film layer on high quality ceramic SnPb termination plating, minimum 6 % Pb APPLICATIONS Avionics TNPW precision thin film flat chip resistors are the perfect Military choice for most fields of modern electronics where reliability and stability is of major concern. Typical applications include Medical equipment industrial, medical equipment, and those, which are not Industrial equipment necessarily subject to the RoHS directive like military and avionics. STANDARD ELECTRICAL SPECIFICATIONS (1) (1) TNPW0402 TNPW0603 TNPW0805 TNPW1206 TNPW1210 TNPW2010 TNPW2512 Metric size RR 1005M RR 1608M RR 2012M RR 3216M RR 3225M RR 5025M RR 6332M Resistance range 10 to 100 k 10 to 332 k 10 to 1 M 10 to 2 M 10 to 3.01 M 10 to 4.99 M 10 to 8.87 M Resistance tolerance 1 % 0.5 % 0.1 % Temperature coefficient 50 ppm/K 25 ppm/K 15 ppm/K 10 ppm/K 50 ppm/K 25 ppm/K (2) 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W 0.4 W 0.5 W Rated dissipation, P 70 Operating voltage, 50 V 75 V 150 V 200 V 200 V 300 V 300 V U AC/DC max. Permissible film 125 C (155 C) temperature, max. F Operating temperature - 55 C to 125 C (155 C) range (3) Thermal resistance 870 K/W 550 K/W 440 K/W 220 K/W 170 K/W 140 K/W 110 K/W Insulation voltage: U 1 min 75 V 100 V 200 V 300 V 300 V 300 V 300 V ins continuous 75 V 75 V 75 V 75 V 75 V 75 V 75 V -9 -9 -9 -9 -9 -9 -9 Failure rate: FIT 0.3 x 10 /h 0.3 x 10 /h 0.3 x 10 /h 0.3 x 10 /h 0.3 x 10 /h 0.3 x 10 /h 0.3 x 10 /h observed Notes TNPW 0402 without marking. (1) Size not specified in EN 140401-801. (2) Rated voltage P x R . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. (3) Measuring conditions in accordance with EN 140401-801. Document Number: 31006 For technical questions, contact: thinfilmchip vishay.com www.vishay.com Revision: 31-Jan-12 345 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000TNPW High Stability Thin Film Chip Resistors Vishay DIMENSIONS DIMENSIONS AND MASS L W H T1/T2 MASS TYPE (mm) (mm) (mm) (mm) (mg) TNPW0402 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.10 0.65 TNPW0603 1.6 0.10 0.85 0.10 0.45 0.10 0.3 0.20 2 TNPW0805 2.0 0.15 1.25 0.15 0.45 0.10 0.4 0.20 5.5 TNPW1206 3.2 0.15 1.6 0.15 0.55 0.10 0.5 0.25 10 TNPW1210 3.2 0.15 2.45 0.15 0.60 0.15 0.5 0.25 16 TNPW2010 5.0 0.15 2.5 0.15 0.60 0.15 0.6 0.25 28 TNPW2512 6.3 0.20 3.1 0.15 0.60 0.15 0.6 0.25 39 SOLDER PAD DIMENSIONS REFLOW SOLDERING WAVE SOLDERING TYPE a b l a b l (mm) (mm) (mm) (mm) (mm) (mm) TNPW0402 0.4 0.6 0.5 - - - TNPW0603 0.5 0.9 1.0 0.9 0.9 1.0 TNPW0805 0.7 1.3 1.2 0.9 1.3 1.3 TNPW1206 0.9 1.7 2.0 1.1 1.7 2.3 TNPW1210 0.9 2.5 2.0 1.1 2.5 2.3 TNPW2010 1.0 2.5 3.9 1.2 2.5 3.9 TNPW2512 1.0 3.2 5.2 1.2 3.2 5.2 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TCR TOLERANCE RESISTANCE E-SERIES 1 % 10R to 100K 24 96 50 ppm/K 0.5 % 10R to 100K 24 192 0.1 % 47R to 100K 1 % 10R to 100K 24 96 TNPW0402 25 ppm/K 0.5 % 10R to 100K 0.1 % 24 192 15 ppm/K 0.1 % 47R to 100K 10 ppm/K 0.1 % 1 % 10R to 332K 24 96 50 ppm/K 0.5 % 10R to 332K 24 192 0.1 % 1 % 10R to 332K 24 96 TNPW0603 25 ppm/K 0.5 % 10R to 332K 0.1 % 24 192 15 ppm/K 0.1 % 47R to 332K 10 ppm/K 0.1 % 1 % 10R to 1M0 24 96 50 ppm/K 0.5 % 10R to 1M0 24 192 0.1 % 1 % 10R to 1M0 24 96 TNPW0805 25 ppm/K 0.5 % 10R to 1M0 0.1 % 24 192 15 ppm/K 0.1 % 47R to 1M0 10 ppm/K 0.1 % www.vishay.com For technical questions, contact: thinfilmchip vishay.com Document Number: 31006 346 Revision: 31-Jan-12 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000