TPSMP20AHM3_A/H Vishay

TPSMP6.8A thru TPSMP43A www.vishay.com Vishay General Semiconductor High Power Density Surface Mount PAR Transient Voltage Suppressors FEATURES eSMP Series Junction passivation optimized design passivated anisotropic rectifier technology T = 185 C capability suitable for high reliability J and automotive requirement Very low profile - typical height of 1.0 mm Ideal for automated placement Uni-direction only SMP (DO-220AA) Excellent clamping capability Low incremental surge resistance Anode Cathode Very fast response time Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C click logo to get started DESIGN SUPPORT TOOLS AEC-Q101 qualified Material categorization: for definitions of compliance Models Available please see www.vishay.com/doc 99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS Protection for ICs, drive transistors, signal lines of sensor V 6.8 V to 43 V BR units, and electronic units in consumer, computer, V 5.8 V to 36.8 V WM industrial, and automotive applications. P (for V 6.8 V) 250 W PPM BR MECHANICAL DATA P (for V 7.5 V to 12 V) 300 W PPM BR P (for V 13 V to 43 V) 400 W PPM BR Case: SMP (DO-220AA) P 2.5 W Molding compound meets UL 94 V-0 flammability rating D Base P/NHM3 X - halogen-free, RoHS-compliant and I 40 A FSM AEC-Q101 qualified (X denotes revision code e.g. A, B, ...) T max. 185 C J Terminals: matte tin plated leads, solderable per Polarity Uni-directional J-STD-002 and JESD 22-B102 Package SMP (DO-220AA) HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A PARAMETER SYMBOLVALUEUNIT (1)(2) Peak power dissipation with a 10/1000 s waveform (fig. 1 and 3) P See table next page W PPM (1) Peak power pulse current with a 10/1000 s waveform (fig. 1) I See table next page A PPM Power dissipation on infinite heatsink, T = 75 C P 2.5 W A D Peak forward surge current 10 ms single half sine-wave I 40 A FSM superimposed on rated load (3) Maximum instantaneous forward voltage at 25 A V 2.5 V F Operating junction and storage temperature range T , T -65 to +185 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A (2) Mounted on PCB with 5.0 mm x 5.0 mm copper pads attached to each terminal (3) Pulse test: 300 s pulse width, 1 % duty cycle Revision: 10-Aug-2018 Document Number: 88471 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TPSMP6.8A thru TPSMP43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise noted) A MAXIMUM MAXIMUM MAXIMUM MAXIMUM MAXIMUM REVERSE PEAK BREAKDOWN DEVICE TEST STAND-OFF REVERSE CLAMPING TEMPERATURE DEVICE LEAKAGE PULSE VOLTAGE MARKING CURRENT VOLTAGE LEAKAGE VOLTAGE COEFFICIENT (1) AT V SURGE TYPE V AT I WM BR T I (mA) V (V) AT V AT I OF V CODE T WM WM PPM BR T = 150 C CURRENT (V) J I (A) V (V) (%/C) R C (2) I (A) I (A) D PPM MIN. MAX. TPSMP6.8A AEP 6.45 7.14 10.0 5.80 300 1000 23.8 10.5 0.057 TPSMP7.5A AGP 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 TPSMP8.2A AKP 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 TPSMP9.1A AMP 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TPSMP10A APP 9.50 10.5 1.0 8.55 5.0 20.0 20.7 14.5 0.073 TPSMP11A ARP 10.5 11.6 1.0 9.40 2.0 10.0 19.2 15.6 0.075 TPSMP12A ATP 11.4 12.6 1.0 10.2 1.0 5.0 18.0 16.7 0.078 TPSMP13A AVP 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TPSMP15A AXP 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TPSMP16A AZP 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TPSMP18A BEP 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TPSMP20A BGP 19.0 21.0 1.0 17.1 1.0 5.0 14.4 27.7 0.090 TPSMP22A BKP 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TPSMP24A BMP 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TPSMP27A BPP 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TPSMP30A BRP 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TPSMP33A BTP 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TPSMP36A BVP 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TPSMP39A BXP 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TPSMP43A BZP 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Notes (1) V measured after I applied for 300 s, I = square wave pulse or equivalent BR T T (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE (1) TPSMP6.8AHM3 A/H 0.024 H 3000 7 diameter plastic tape and reel (1) TPSMP6.8AHM3 A/I 0.024 I 10 000 13 diameter plastic tape and reel Note (1) Automotive grade Revision: 10-Aug-2018 Document Number: 88471 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000