TR, TD Vishay Techno Thick Film Planar Resistors and Dividers, Through-Hole, High Voltage FEATURES 30 000 V capability Very low voltage coefficient to less than 1 ppm/V Outstanding stability under adverse conditions Stable cermet resistive element bonded to a high-purity alumina substrate Tough epoxy-based coating and high voltage stability Designs built from customer supplied schematics APPLICATIONS Dividers available leaded or non-leaded Typical resistance ratios of 1000:1, 2000:1, etc. Applications include power supplies, transformers and any TCR tracking to 5 ppm/C depending on values application requiring operation within an environment where TD series dividers available, contact factory high voltages are used. Compliant to RoHS directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition STANDARD ELECTRICAL SPECIFICATIONS (1) POWER MAXIMUM RESISTANCE RANGE RATING WORKING MODEL (2) P VOLTAGE 1 % to 20 % 1 %, 2 % 5 % to 20 % 1 %, 2 % 5 % to 20 % 5 % to 20 % 25 C (3) W kV 100 ppm/C 200 ppm/C 200 ppm/C 300 ppm/C 300 ppm/C TR03C 0.8 300 to 3M 300 to 25M 300 to 25M 300 to 25M 300 to 25M - 0.25 TR03X 2.5 - 25M to 250M 25M to 2G 25M to 250M 25M to 2G 2.1G to 10G TR05D 4 500 to 25M 3k to 200M 3k to 200M 3k to 200M 3k to 200M - 0.5 TR05X 5 - 30M to 1G 30M to 20G 30M to 1G 30M to 20G 21G to 100G TR10F 6.5 1k to 16M 2k to 120M 2k to 120M 2k to 120M 2k to 120M - 1 TR10X 10 - 20M to 1G 20M to 15G 20M to 1G 20M to 15G 16G to 1T TR15G 12.5 1.5k to 45M 5k to 340M 5k to 340M 5k to 340M 5k to 340M - 1.5 TR15X 15 - 60M to 1G 60M to 35G 60M to 1G 60M to 35G 36G to 1.5T TR20H 17.5 2k to 64M 8k to 480M 8k to 480M 8k to 480M 8k to 480M - 2 TR20X 20 - 80M to 1G 80M to 50G 80M to 1G 80M to 50G 51G to 2T TR30J 25 3k to 82M 8.5k to 620M 8.5k to 620M 8.5k to 620M 8.5k to 620M - 3 TR30X 30 - 80M to 1G 80M to 60G 80M to 1G 80M to 60G 61G to 3T Notes Custom sizes available Voltage coefficient: Typically less than 1 ppm/V (tested per MIL-STD-202) Ratio tolerance for dividers: 1 % to 20 % Ratio TCR for dividers: To 5 ppm/C (ratio over 1000:1, contact factory) (1) All resistance values are calibrated at 100 V . Calibration at other voltages available upon request. DC (2) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (3) Contact factory GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TR20H1K00FKEB (preferred part number format) T R2 0H1K 0 0 F K EB GLOBAL RESISTANCE TERMINAL SIZE/POWER RATING TOLERANCE TCR PACKAGING MODEL VALUE FINISH TR 03C = 0.25 W R = F = 1.0 % K = 100 ppm E = Sn100 B = Bag 03X = 0.25 W, max. voltage K = k G = 2.0 % N = 200 ppm R = Sn60/Pb40 S = Strip 05D = 0.5 W M = M J = 5.0 % M = 300 ppm 05X = 0.5 W, max. voltage G = G K = 10.0 % 10F = 1 W T = T M = 20.0 % 10X = 1 W, max. voltage 400R = 400 15G = 1.5 W 10M0 = 10 M 15X = 1.5 W, max. voltage 1T00 = 1 T 20H = 2 W 20X = 2 W, max. voltage 30J = 3 W 30X = 3 W, max. voltage Historical Part Numbering: TR20H1001FKe3 (will continue to be accepted) TR 20H 1001 F K e3 HISTORICAL MODEL SIZE/POWER RATING RESISTANCE VALUE TOLERANCE TCR TERMINAL FINISH * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 68000 For technical questions, contact: te1resistors vishay.com www.vishay.com Revision: 05-Mar-10 9TR, TD Thick Film Planar Resistors and Dividers, Vishay Techno Through-Hole, High Voltage MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Resistive Element: Thick film Temperature Range: - 55 C to + 125 C (for higher Substrate: 96 % pure alumina temperature range, consult factory) Encapsulation: Epoxy base, conformal coating Load Life: Less than 0.15 %, 1000 h Terminals: Tin plated copper leads Terminal Strength: 4.5 pounds pull-test Power: Derated from ambient temperature + 25 C DIMENSIONS in inches (millimeters) Typical Resistor Schematic for Divider Pin R R 1 2 1 Typical High Voltage Divider 0.125 (3.18) Max. (1) * Pin 1 (1) 1.25 (31.75) Min. Note (1) (1) (1) Specified by application D 0.002 (0.051) Dia. Standard High Voltage Resistor 0.125 (3.18) Max. A B 1.25 (31.75) Min. C D 0.002 (0.051) Dia. DIMENSIONS ( 10 %) A B C D MODEL (LENGTH) (HEIGHT) (LEAD SPACING) (LEAD DIA.) TR03 0.300 (7.62) 0.210 (5.33) 0.200 (5.08) 0.025 TR05 0.500 (12.70) 0.300 (7.62) 0.400 (10.16) 0.025 TR10 1.00 (25.40) 0.350 (8.89) 0.900 (22.86) 0.032 TR15 1.50 (38.10) 0.350 (8.89) 1.40 (35.56) 0.032 TR20 2.00 (50.80) 0.350 (8.89) 1.90 (48.26) 0.032 TR30 3.00 (76.20) 0.400 (10.16) 2.90 (73.66) 0.032 DERATING 100 High Voltage Dividers 80 60 40 High Voltage Resistors 20 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE C www.vishay.com For technical questions, contact: te1resistors vishay.com Document Number: 68000 10 Revision: 05-Mar-10 % OF RATED POWER