TRC www.vishay.com Vishay Techno Thick Film Resistor/Capacitor Networks, Single-In-Line, Conformal Coated SIP FEATURES Isolated and bussed schematics available Thick film resistors NP0 or X7R capacitors for line terminator Wide operating temperature range (- 55 C to 125 C) Custom Resistor/Capacitor schematics available Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS RESISTOR CHARACTERISTICS CAPACITOR CHARACTERISTICS POWER RESISTANCE RESISTANCE TEMP. CAPACITANCE CAPACITANCE MODEL SCHEMATIC CAPACITANCE (1) (2) (3) RATING RANGE TOLERANCE COEFF. TYPE TOLERANCE VOLTAGE RANGE P W % ppm/C % V 70 C DC NP0 33 pF to 3900 pF 10, 20 01 0.20 10 to 1M 1, 2, 5 150 50 X7R 470 pF to 0.1 F 10, 20 NP0 33 pF to 3900 pF 10, 20 TRC 02 0.20 10 to 1M 1, 2, 5 150 50 X7R 470 pF to 0.1 F 10, 20 NP0 33 pF to 3900 pF 10, 20 09 0.20 10 to 1M 1, 2, 5 150 50 X7R 470 pF to 0.1 F 10, 20 Notes (1) 2 % standard, 1 % and 5 % available (2) NP0 capacitors may be substituted for X7R capacitors (3) Tighter tolerances available on request GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TRC0801N101J560KTB (preferred part number format) T RC 0801 N 10 1J5 6 0 K T B GLOBAL PIN RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE TERMINAL SCHEMATIC CHARACTERISTICS PACKAGING MODEL COUNT VALUE TOLERANCE VALUE TOLERANCE FINISH TRC 06 to 12 01 N = NP0 2 digit F = 1 % (In picofarads) K = 10 % T = B = Bulk pin 02 X = X7R significant G = 2 % 2 digit M = 20 % Sn90/Pb10 available 09 figure, J = 5 % significant C = 06 = followed by figure, Sn95.5/ 6 pin a multiplier followed by a Ag3.9/ 08 = 101 = 100 multiplier Cu0.6 8 pin 220 = 22 101 = 100 pF 12 = 102 = 1 k 392 = 3000 pF 12 pin 104 = 0.1 F Historical Part Numbering: TRC0801101J560KS10 (will continue to be accepted) TRC 08 01 101 J 560 K S10 HISTORICAL PIN RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE TERMINAL SCHEMATIC MODEL COUNT VALUE TOLERANCE VALUE TOLERANCE FINISH Notes For additional information on packaging, refer to the Through-hole Network Packaging document (www.vishay.com/doc 31542). Revision: 23-Jan-13 Document Number: 68007 1 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TRC www.vishay.com Vishay Techno SCHEMATICS SCHEMATIC 01 SCHEMATIC 02 SCHEMATIC 09 1 2 3 4 n-1 n 1 2 3 4 n-1 n 1 2 3 4 n-1 n Note Custom schematics available DIMENSIONS in inches (millimeters) 0.130 A Max. (3.30) Max. Pin 1 Identifier C Max. Seating 0.125 0.015 Plane (3.18 0.381) 0.020 0.002 (0.508 0.051) 0.010 0.002 (0.254 0.051) 0.100 0.005 (2.54 0.127) Non-Cumulative B A B C NUMBER OF PINS (Max.) 0.005 (0.127) (Max.) 6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89) 7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89) 8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89) 9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89) 10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89) 11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89) 12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89) Note Other sizes available Revision: 23-Jan-13 Document Number: 68007 2 For technical questions, contact: te1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000