TS53YJ504MR10 Vishay

333 3 TS53 www.vishay.com Vishay Sfernice 5 mm Square Surface Mount Miniature Trimmers Single-Turn Cermet Sealed FEATURES 0.25 W at 70 C For through hole version see T53Y series Wide ohmic range (10 to 1 M) Small size for optimum packaging density Tests according to CECC 41000 or IEC 60393-1 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 LINKS TO ADDITIONAL RESOURCES 3D Models The TS53 trimming potentiometer has been designed for surface mount applications and offers volumetric efficiency (5 mm x 5 mm x 2.7 mm) with high performance and stability. The TS53 design is suitable for both manual or automatic operation, and can withstand wave, and reflow soldering techniques. DIMENSIONS in millimeters ( 0.25 mm) RECOMMENDED SOLDERING AREAS TS53YL TS53YJ TS53YL TS53YJ 5 5 0.20 2.7 2.7 0.20 2 2 6.4 5.5 b 0.75 1.1 1.3 b 2 1.3 4 5.5 1.3 2 1.3 c a c a 0.9 x 0.20 0.9 x 0.20 1 x 0.20 1 x 0.20 2.3 2.3 a a b b 5 2.30 5 2.30 c c Cruciform screwdriver slot 2.5, width 0.5 Deep: 0.55 Max. deep (center): 0.7 Revision: 23-Mar-2021 Document Number: 51008 1 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D A6 103 TS53 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 220 15 Resistance range 10 to 1 M Standard series 1 - 2 - 5 Tolerance standard 20 % a c Circuit diagram (1) (3) b cw (2) linear 0.25 W at + 70 C 0.25 0.20 0.15 Power rating 0.10 0.05 0 100 120 140 0 20 40 60 70 155 AMBIENT TEMPERATURE IN C Temperature coefficient See Standard Resistance Element Data table Limiting element voltage (linear law) 200 V Contact resistance variation (typical) 1 % or 3 End resistance (typical) 0.1 % or 3 Dielectric strength (RMS) 1000 V Insulation resistance 1 G MECHANICAL SPECIFICATIONS Mechanical travel 270 10 Operating torque (max. Ncm) 1.5 End stop torque (max. Ncm) 3.5 Unit weight (max. g) 0.15 Terminals Pure Sn (e3) ENVIRONMENTAL SPECIFICATIONS Temperature range -55 C to +125 C Climatic category 55 / 125 / 56 Sealing Sealed container IP67 MSL level 4 SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc 52029 Caution Reflow soldering must be done within 72 h while stored under a max. temperature of 30 C, 60 % RH after opening the dry pack envelope. Revision: 23-Mar-2021 Document Number: 51008 2 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 POWER IN W