33 3 TSSP58038 www.vishay.com Vishay Semiconductors IR Receiver Module for Light Barrier Systems FEATURES Up to 2 m for presence sensing Uses modulated bursts at 38 kHz PIN diode and sensor IC in one package Low supply current Shielding against EMI Visible light is suppressed by IR filter 1 Insensitive to supply voltage ripple and noise 22 Supply voltage: 2.5 V to 5.5 V 33 19026 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 DESIGN SUPPORT TOOLS AVAILABLE APPLICATIONS 3D Models Reflective sensors for hand dryers, towel or soap dispensers, water faucets, toilet flush MECHANICAL DATA Vending machine fall detection Pinning: Security and pet gates 1 = OUT, 2 = GND, 3 = V S Person or object vicinity activation DESCRIPTION The TSSP58038 is a compact infrared detector module for presence sensing applications. It receives 38 kHz modulated signals and has a peak sensitivity of 940 nm. This component has not been qualified according to automotive specifications. PARTS TABLE Carrier frequency 38 kHz TSSP58038 Package Minicast Pinning 1 = OUT, 2 = GND, 3 = V S Dimensions (mm) 5.0 W x 6.95 H x 4.8 D Mounting Leaded Application Presence sensors BLOCK DIAGRAM PRESENCE SENSING +3 V 16833 8 3 IR emitter V S 33 k Envelope 1 signal OUT 38 kHz Band Demo- Input AMP pass dulator +3 V 2 Out to C PIN GND Rev. 1.7, 10-Apr-2019 Document Number: 82479 1 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DD D TSSP58038 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Supply voltage V -0.3 to +6 V S Supply current I 5mA S Output voltage V -0.3 to (V + 0.3) V O S Output current I 5mA O Junction temperature T 100 C j Storage temperature range T -25 to +85 C stg Operating temperature range T -25 to +85 C amb Power consumption T 85 C P 10 mW amb tot Note Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating onl y and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specificatio n is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability ELECTRICAL AND OPTICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT E = 0, V = 5 V I 0.55 0.7 0.9 mA v S SD Supply current (pin 3) E = 40 klx, sunlight I -0.8 - mA v SH Supply voltage V 2.5 - 5.5 V S E = 0, test signal see Fig. 1, v Transmission distance IR diode TSAL6200, d- 8 - m I = 50 mA F 2 I = 0.5 mA, E = 2 mW/m , OSL e Output voltage low (pin 1) V - - 100 mV OSL test signal see Fig. 1 Pulse width tolerance: 2 Minimum irradiance t - 5/f < t < t + 6/f , E -0.7 1.2 mW/m pi o po pi o e min. test signal see Fig. 1 t - 5/f < t < t + 6/f , pi o po pi o 2 Maximum irradiance E 50 - - W/m e max. test signal see Fig. 1 Angle of half transmission Directivity - 45 - deg 1/2 distance Rev. 1.7, 10-Apr-2019 Document Number: 82479 2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000