TZS4703-GS08 Vishay

TZS4678 to TZS4717 www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES Zener voltage specified at 50 A Maximum delta V given from 10 A to 100 A Z Very high stability Low noise AEC-Q101 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS click logo to get started DESIGN SUPPORT TOOLS Voltage stabilization Models Available PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V range nom. 1.8 to 43 V Z Test current I 0.05 mA ZT V specification Pulse current Z Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY TZS4678 to TZS4717 TZS4678-GS08 to TZS4717-GS08 2500 (per 7 reel) 12 500/box PACKAGE MOLDING COMPOUND MOISTURE SENSITIVITY PACKAGE NAME WEIGHT SOLDERING CONDITIONS FLAMMABILITY RATING LEVEL MSL level 1 QuadroMELF (SOD-80) 34 mg UL 94 V-0 260 C/10 s at terminals (according J-STD-020) ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation R 300 K/W P 500 mW thJA tot Zener current I P /V mA Z tot Z Junction to ambient air On PC board 50 mm x 50 mm x 1.6 mm R 500 K/W thJA Junction temperature T 175 C j T Storage temperature range -65 to +175 C stg Forward voltage (max.) I = 100 mA V 1.5 V F F Rev. 1.9, 22-Feb-18 Document Number: 85613 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TZS4678 to TZS4717 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb (3) (4) ZENER VOLTAGE RANGE TEST CURRENT REVERSE CURRENT VOLTAGE CHANGE (2) V at I I I I at V V PART Z ZT1 ZT1 ZT2 R R Z NUMBER V mA A V V (1) MIN. NOM. MAX. MAX. MAX. TZS4678 1.71 1.8 1.89 0.05 120 7.5 1 0.7 TZS4679 1.9 2 2.1 0.05 110 5 1 0.7 TZS4680 2.09 2.2 2.31 0.05 100 4 1 0.75 TZS4681 2.28 2.4 2.52 0.05 95 2 1 0.8 TZS4682 2.565 2.7 2.835 0.05 90 1 1 0.85 TZS4683 2.85 3 3.15 0.05 85 0.8 1 0.9 TZS4684 3.135 3.3 3.465 0.05 80 7.5 1.5 0.95 TZS4685 3.42 3.6 3.78 0.05 75 7.5 2 0.95 TZS4686 3.705 3.9 4.095 0.05 70 5 2 0.97 TZS4687 4.085 4.3 4.515 0.05 65 4 2 0.99 TZS4688 4.465 4.7 4.935 0.05 60 10 3 0.99 TZS4689 4.845 5.1 5.355 0.05 55 10 3 0.97 TZS4690 5.32 5.6 5.88 0.05 50 10 4 0.96 TZS4691 5.89 6.2 6.51 0.05 45 10 5 0.95 TZS4692 6.46 6.8 7.14 0.05 35 10 5.1 0.9 TZS4693 7.125 7.5 7.875 0.05 31.8 10 5.7 0.75 TZS4694 7.79 8.2 8.61 0.05 29 1 6.2 0.5 TZS4695 8.265 8.7 9.135 0.05 27.4 1 6.6 0.1 TZS4696 8.645 9.1 9.555 0.05 26.2 1 6.9 0.08 TZS4697 9.5 10 10.5 0.05 24.8 1 7.6 0.1 TZS4698 10.45 11 11.55 0.05 21.6 0.05 8.4 0.11 TZS4699 11.4 12 12.6 0.05 20.4 0.05 9.1 0.12 TZS4700 12.35 13 13.65 0.05 19 0.05 9.8 0.13 TZS4701 13.3 14 14.7 0.05 17.5 0.05 10.6 0.14 TZS4702 14.25 15 15.75 0.05 16.3 0.05 11.4 0.15 TZS4703 15.2 16 16.8 0.05 15.4 0.05 12.1 0.16 TZS4704 16.15 17 17.85 0.05 14.5 0.05 12.9 0.17 TZS4705 17.1 18 18.9 0.05 13.2 0.05 13.6 0.18 TZS4706 18.05 19 19.95 0.05 12.5 0.05 14.4 0.19 TZS4707 19 20 21 0.05 11.9 0.01 15.2 0.2 TZS4708 20.9 22 23.1 0.05 10.8 0.01 16.7 0.22 TZS4709 22.8 24 25.2 0.05 9.9 0.01 18.2 0.24 TZS4710 23.75 25 26.25 0.05 9.5 0.01 19 0.25 TZS4711 25.65 27 28.35 0.05 8.8 0.01 20.4 0.27 TZS4712 26.6 28 29.4 0.05 8.5 0.01 21.2 0.28 TZS4713 28.5 30 31.5 0.05 7.9 0.01 22.8 0.3 TZS4714 31.35 33 34.65 0.05 7.2 0.01 25 0.33 TZS4715 34.2 36 37.8 0.05 6.6 0.01 27.3 0.36 TZS4716 37.05 39 40.95 0.05 6.1 0.01 29.6 0.39 TZS4717 40.85 43 45.15 0.05 5.5 0.01 32.6 0.43 Notes (1) Tolerancing and voltage designation (V ). The type numbers shown have a standard tolerance of 5 % on the nominal zener voltage. Z (2) Maximum Zener current ratings (I ). Maximum Zener current ratings are based on maximum Zener voltage of the individual units ZM (3) Reverse leakage current (I ). Reverse leakage currents are guaranteed and measured at V as shown on the table. R R (4) Maximum voltage change (V ). Voltage change is equal to the difference between V at 100 A and V at 10 A. Z Z Z Rev. 1.9, 22-Feb-18 Document Number: 85613 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000