VCUT0714A-HD1-GS08 Vishay

333 3 VCUT0714A-HD1 www.vishay.com Vishay Semiconductors Bidirectional Asymmetrical (BiAs) Single Line ESD Protection Diode in LLP1006-2L FEATURES Ultra compact LLP1006-2L Low package height < 0.4 mm 1 2 1-line ESD protection Working range -7 V up to +14 V or -14 V up to +7 V 20950 Low leakage current < 0.1 A 20855 Low load capacitance typical C = 8 pF D MARKING (example only) ESD immunity acc. IEC 61000-4-2 25 kV contact discharge 30 kV air discharge XY e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) 21121 PATENT(S): www.vishay.com/patents Bar = pin 1 marking Y = type code (see table below) Material categorization: for definitions of compliance X = date code please see www.vishay.com/doc 99912 LINKS TO ADDITIONAL RESOURCES 3D Models ORDERING INFORMATION TAPED UNITS PER REEL PIN PLATING DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) e4 VCUT0714A-HD1 VCUT0714A-HD1-GS08 8k 8k PACKAGE DATA PACKAGE PIN TYPE MOLDING COMPOUND MOISTURE SOLDERING DEVICE NAME WEIGHT NAME PLATING CODE FLAMMABILITY RATING SENSITIVITY LEVEL CONDITIONS MSL level 1 Peak temperature VCUT0714A-HD1 LLP1006-2L e4 B 0.72 mg UL 94 V-0 (according J-STD-020) max. 260 C ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Pin 1 to pin 2, acc. IEC 61000-4-5, 8/20 s/single shot 5A Peak pulse current I PPM Pin 2 to pin 1, acc. IEC 61000-4-5, 8/20 s/single shot 2 A Pin 1 to pin 2, acc. IEC 61000-4-5, 8/20 s/single shot 63 W Peak pulse power P PP Pin 2 to pin 1, acc. IEC 61000-4-5, 8/20 s/single shot 54 W Contact discharge acc. IEC 61000-4-2 10 pulses 25 kV ESD immunity V ESD Air discharge acc. IEC 61000-4-2 10 pulses 30 kV Storage temperature T -55 to +150 C STG Operating temperature Junction temperature T -40 to +125 C J PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Rev. 2.5, 04-May-2020 Document Number: 81801 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D1 2 VCUT0714A-HD1 www.vishay.com Vishay Semiconductors CUT THE SPIKES The VCUT0714A-HD1 is a bidirectional but asymmetrical (BiAs) ESD protection device which clamps positive and negative overvoltage transients to ground. Connected between the signal or data line and the ground the VCUT0714A-HD1 offers a high isolation (low leakage current, small capacitance) within the specified working range of -7 V to +14 V or -14 V and +7 V. Due to the short leads and small package size of the tiny LLP1006 package the line inductance is very low, so that fast transients like an ESD strike can be clamped with minimal over- or undershoots. - 7 V V + 14 V - 14 V V + 7 V RW RW Ground Ground 22286 ELECTRICAL CHARACTERISTICS (pin 2 to pin 1) (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 14 V RWM Reverse voltage At I = 0.1 A V 14 - - V R R Reverse current At V = 14 V I -- 0.1 A RWM R Reverse breakdown voltage At I = 1 mA V 14.5 - - V R BR At I = 1 A V -- 27 V PP C Reverse clamping voltage At I = I = 2 A V -- 30 V PP PPM C At V = 0 V f = 1 MHz C -8 8.5 pF R D Capacitance At V = 7 V f = 1 MHz C -4- pF R D ELECTRICAL CHARACTERISTICS (pin 1 to pin 2) (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand-off voltage Max. reverse working voltage V -- 7 V RWM Reverse voltage At I = 0.1 A V 7- - V R R Reverse current At V = 7 V I -- 0.1 A RWM R Reverse breakdown voltage At I = 1 mA V 7.3 - - V R BR At I = 1 A V -- 13 V PP C Reverse clamping voltage At I = I = 5 A V -- 17 V PP PPM C At V = 0 V f = 1 MHz C -8 8.5 pF D Capacitance At V = 3.5 V f = 1 MHz C -6.4 - pF D Rev. 2.5, 04-May-2020 Document Number: 81801 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2 1