VEMI256A-SD2-G4-08 Vishay

333 3 VEMI256A-SD2 www.vishay.com Vishay Semiconductors 2-Channel EMI-Filter with ESD-Protection FEATURES Ultra compact CLP1007-5M package 2-channel EMI-filter and ESD-protection Low leakage current Line resistance R = 60 S Typical cut off frequency f = 60 MHz 3dB ESD-protection acc. IEC 61000-4-2 25 kV contact discharge 25 kV air discharge e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) Material categorization: for definitions of compliance MARKING (example only) please see www.vishay.com/doc 99912 MM 56A YY Pin 1 56A = type code MM = date code month YY = date code year LINKS TO ADDITIONAL RESOURCES 3D Models Footprints ORDERING INFORMATION TAPED UNITS PER REEL DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (8 mm TAPE ON 7 REEL) VEMI256A-SD2 VEMI256A-SD2-G4-08 10 000 10 000 PACKAGE DATA PACKAGE TYPE MOLDING COMPOUND MOISTURE SOLDERING DEVICE NAME WEIGHT NAME CODE FLAMMABILITY RATING SENSITIVITY LEVEL CONDITIONS MSL level 1 Peak temperature VEMI256A-SD2 CLP1007-5M 56A 0.45 mg UL 94 V-0 (according J-STD-020) max. 260 C ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT All I/O pin to pin 4 acc. IEC 61000-4-5 Peak pulse current I 8.5 A PPM t = 8/20 s single shot p Contact discharge acc. IEC 61000-4-2 10 pulses 25 ESD immunity V kV ESD Air discharge acc. IEC 61000-4-2 10 pulses 25 Operating temperature Junction temperature T -40 to +150 C J Storage temperature T -55 to +150 C STG Rev. 1.0, 15-Nov-2021 Document Number: 86151 1 For technical questions, contact: EMIFilter vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD DVEMI256A-SD2 www.vishay.com Vishay Semiconductors APPLICATION NOTE With the VEMI256A-SD2 two different signal or data lines can be filtered and clamped to ground. R 15 Pin 1 Pin 5 Pin 4 R 23 Pin 2 Pin 3 ELECTRICAL CHARACTERISTICS All inputs (pin 1, 2) to ground (pin 4) (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of channels which can be protected N - - 2 channel channel Reverse stand off voltage Max. reverse working voltage V - - 5.5 V RWM Reverse voltage at I = 0.5 A V 5.5 - - V R R Reverse current at V = 5.5 V I - - 0.5 A R R Reverse break down voltage I = 1 mA V 6 - - V R BR at I = 1 A applied at the input, measured at PP V - 8 10 V C-out the output acc. IEC 61000-4-5 Pos. clamping voltage at I = I = 8.5 A applied at the input, PP PPM V - 9 11 V C-out measured at the output acc. IEC 61000-4-5 at V = 0 V f = 1 MHz C - 116 - pF R IN Input capacitance at V = 2.5 V f = 1 MHz C - 90 - pF R IN ESD-clamping voltage at 30 kV ESD-pulse acc. IEC 61000-4-2 V - 7.5 - V CESD Measured between input and output Line resistance R 54 60 66 S I = 10 mA S Cut-off frequency V = 0 V measured in a 50 system f - 60 - MHz IN 3dB Rev. 1.0, 15-Nov-2021 Document Number: 86151 2 For technical questions, contact: EMIFilter vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000