VJ0402Y822KNAAJ Vishay

VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0) and X7R / X5R dielectrics Wide range of case sizes, voltage ratings, and capacitance values Suitable for conductive epoxy bonding Wet built process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Magnetic Resonance Imaging (MRI) Medical test and diagnostic equipment Hi-rel medical systems Hi-rel aviation systems Laboratory analysis systems Navigation and electronic test equipment Audio amplifiers ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) NON-MAGNETIC X7R / X5R GENERAL SPECIFICATION GENERAL SPECIFICATION Note Note Electrical characteristics at +25 C unless otherwise specified Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Operating Temperature: -55 C to +125 C Capacitance Range: 1.0 pF to 39 nF Capacitance Range: 100 pF to 6.8 F Voltage Range: 10 V to 3000 V Voltage Range: 6.3 V to 3000 V DC DC DC DC Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC): 0 ppm/C 30 ppm/C from -55 C to +125 C X5R: 15 % from -55 C to +85 C, with 0 V applied DC X7R: 15 % from -55 C to +125 C, with 0 V applied DC Dissipation Factor (DF): 0.1 % maximum at 1.0 V and Dissipation Factor (DF): RMS 1 MHz for values 1000 pF 6.3 V, 10 V ratings: 5 % maximum at 1.0 V and 1 kHz RMS 0.1 % maximum at 1.0 V and 16 V, 25 V ratings: 3.5 % maximum at 1.0 V and 1 kHz RMS RMS 1 kHz for values > 1000 pF 50 V ratings: 2.5 % maximum at 1.0 V and 1 kHz RMS Insulating Resistance: Insulating Resistance: at +25 C 100 000 M min. or 1000 F whichever is less at +25 C 100 000 M min. or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less Aging: 0 % maximum per decade Aging Rate: 1 % maximum per decade Dielectric Strength Test: Dielectric Strength Test: performed per method 103 of EIA 198-2-E. performed per method 103 of EIA 198-2-E. Applied test voltages Applied test voltages 200 V -rated: 250 % of rated voltage 200 V -rated: 250 % of rated voltage DC DC 500 V -rated: 200 % of rated voltage 500 V -rated: min. 150 % of rated voltage DC DC 630 V , 1000 V -rated: 150 % of rated voltage 630 V 1000 V -rated: 150 % of rated voltage DC DC DC, DC 1500 V to 3000 V -rated: 120 % of rated voltage 1500 V , 3000 V -rated: 120 % of rated voltage DC DC DC DC Revision: 18-May-17 Document Number: 45128 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ Non-Magnetic Series for Epoxy Bonding www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 100 1.0 pF 180 pF 0603 200 1.0 pF 1.5 nF 0805 500 1.0 pF 3.3 nF 1206 600 1.0 pF 10 nF 1210 500 1.0 pF 12 nF C0G (NP0) 1808 3000 10 pF 10 nF 1812 3000 27 pF 22 nF 1825 1000 15 pF 33 nF 2220 1000 100 pF 33 nF 2225 1000 120 pF 39 nF 0402 16 27 nF 47 nF X5R 0603 6.3 120 nF 150 nF 0402 100 100 pF 22 nF 0603 100 270 pF 100 nF 0805 200 390 pF 390 nF 1206 500 680 pF 1.0 F 1210 500 1.0 nF 1.0 F X7R 1808 3000 220 pF 270 nF 1812 3000 270 pF 1.0 F 1825 1000 10 nF 2.7 F 2220 3000 1.0 nF 2.2 F 2225 2000 5.6 nF 4.7 F 3640 500 15 nF 6.8 F Note Detail ratings see Selection Chart Revision: 18-May-17 Document Number: 45128 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000