VJ0505D0R8VXPAJ Vishay

VJ HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency FEATURES Case size 0402, 0603, 0805 Available High frequency Ultra-stable dielectric material Available Non-magnetic copper termination C Lead (Pb)-free terminations code X Tin / lead termination code L Available Surface mount, wet build process Reliable Noble Metal Electrode (NME) system Made with a combination of design, materials and tight process control to achieve very high field reliability Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details DESIGN SUPPORT TOOLS AVAILABLE APPLICATIONS RF and microwave Broadband communication Design Tools S-Parameters Satellite communication Base stations Medical instrumentation and test Military devices (radar, communication, etc.) Wireless devices ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified Operating Temperature: Aging Rate: 0 % maximum per decade -55 C to +125 C Insulation Resistance (IR): Capacitance Range: at +25 C and rated voltage 100 000 M minimum or 0402: 0.1 pF to 82 pF 1000 F, whichever is less 0603: 0.1 pF to 470 pF at +125 C and rated voltage 10 000 M minimum or 100 F, whichever is less 0805: 0.1 pF to 1.5 nF Dielectric Strength Test: Voltage Rating: 25 V to 250 V DC DC performed per method 103 of EIA-198-2-E. Temperature Coefficient of Capacitance (TCC): Applied test voltages: C0G (D): 0 ppm/C 30 ppm/C from -55 C to +150 C with 200 V -rated: min. 250 % of rated voltage DC zero (0) V applied DC > 200 V -rated: min. 200 % of rated voltage DC Dissipation Factor (DF): C0G (D): 0.05 % max. at 1.0 V and 1 MHz RMS for values 1000 pF C0G (D): 0.05 % max. at 1.0 V and 1 kHz RMS for values > 1000 pF Revision: 13-Sep-2019 Document Number: 45071 1 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 200 0.1 pF 82 pF D = HIFREQ 0603 250 0.1 pF 470 pF 0805 250 0.1 pF 1.5 nF Note For values below 0.4 pF, contact mlccrf vishay.com ORDERING INFORMATION VJ0603 D 1R0 B X B A C CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING (1) CODE NOMINAL CODE TOLERANCE RATING (3) 0402 D = HIFREQ Expressed in V = 0.05 pF C = non-magnetic X = 25 V A = unmarked 0603 picofarads (pF). B = 0.10 pF copper barrier A = 50 V Q = marked 0805 The first two digits C = 0.25 pF 100 % tin plate B = 100 V are significant, the D = 0.50 pF matte finish C = 200 V T = 7 reel / plastic tape (2) third is a multiplier. F = 1 % E = AgPd P = 250 V C = 7 reel / paper tape An R indicates a G = 2 % X = Ni barrier O = 7 reel / flamed paper tape decimal point. J = 5 % 100 % tin plate J = 7 reel (low quantity) Examples: K = 10 % matte finish R = 11 1/4 / 13 reel / 1R0 = 1.0 pF M = 20 % L = Ni barrier plastic tape with tin lead P = 11 1/4 / 13 reel / Note plated finish paper tape Details see min. 4 % lead I = 11 1/4 / 13 reel / Selection flamed paper tape Chart B = bulk Note I and O is used for E termination code Notes (1) DC voltage rating should not be exceeded in application (2) Termination code E is for conductive epoxy assembly (3) Case size 0402 only available with A ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN C Non-magnetic copper barrier 100 % tin plated matte finish Yes Yes X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd YesYes L Ni barrier tin lead plated with min. 4 % lead No No DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATIONS PAD (P) CASE LENGTH WIDTH MAXIMUM STYLE (1) CODE (L) (W) THICKNESS (T) MINIMUM MAXIMUM 0.040 0.004 0.020 0.004 0.024 0.004 0.016 0402 VJ0402 (1.02 0.10) (0.51 0.10) (0.61) (0.10) (0.41) 0.063 0.006 0.031 0.005 0.037 0.010 0.022 0603 VJ0603 (1.60 0.15) (0.80 0.12) (0.94) (0.25) (0.55) 0.079 0.008 0.049 0.008 0.057 0.010 0.030 0805 VJ0805 (2.00 0.20) (1.25 0.20) (1.45) (0.25) (0.76) Note (1) For Cu termination C add 0.01 mm to maximum pad terminations Revision: 13-Sep-2019 Document Number: 45071 2 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000