VJ0505D680KXPAJ Vishay

QUAD HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Capacitors for RF Power Applications FEATURES Case size 0505 and 1111 and 2525 Available Ultra-stable, high Q dielectric material Available Lead (Pb)-free terminations code X Tin/lead termination code L Reliable Noble Metal Electrode (NME) system Available High frequency Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. APPLICATIONS MRI coils and generators RF instruments Lasers, CATV, UHF/microwave RF power amplifiers Filter networks, timing circuits Mixers, oscillators impedance matching networks ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified Operating Temperature: -55 C to +125 C Aging Rate: 0 % maximum per decade Capacitance Range: Insulation Resistance (IR): 0505: 1.0 pF to 100 pF At +25 C and rated voltage 100 000 M minimum or 1111: 1.0 pF to 1000 pF 1000 F, whichever is less 2525: 1.0 pF to 2700 pF At +125 C and rated voltage 10 000 M minimum or 100 F, whichever is less Voltage Rating: 0505: 200 V to 250 V Dielectric Strength Test: DC DC 1111: 300 V to 1500 V Performed per method 103 of EIA-198-2-E. DC DC 2525: 300 V to 3600 V DC DC Applied test voltages: Temperature Coefficient of Capacitance (TCC): 250 V -rated: Min. 250 % of rated voltage DC C0G (D): 0 ppm/C 30 ppm/C from -55 C to +125 C with 300 V -rated: Min. 150 % of rated voltage DC zero (0) V applied 630 V - to 1000 V -rated: 150 % of rated voltage DC DC DC 1500 V and up: 120 % rated voltage DC Dissipation Factor (DF): C0G (D): 0.05 % max. at 1.0 V and 1 MHz RMS for values 1000 pF C0G (D): 0.05 % max. at 1.0 V and 1 kHz RMS for values > 1000 pF Revision: 13-Mar-14 Document Number: 45221 1 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 QUAD HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0505 250 1.0 pF 100 pF D = NP0 1111 1500 1.0 pF 1000 pF 2525 3600 1.0 pF 2700 pF Notes For values below 1.0 pF and tolerance 0.05 pF, contact mlcc vishay.com Detail ratings see Selection Chart ORDERING INFORMATION VJ0505 D 1R0 B X C A C CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING (1) CODE NOMINAL CODE TOLERANCE RATING 0505 D = HIFREQ Expressed in B = 0.10 pF X = Ni barrier C = 200 V A = No 1111 picofarads (pF). C = 0.25 pF 100 % tin plate marking P = 250 V 2525 The first two digits D = 0.50 pF matte finish D = 300 V are significant, the F = 1 % L = Ni barrier E = 500 V T = 7 reel/plastic tape third is a multiplier. G = 2 % with tin lead L = 630 V C = 7 reel/paper tape An R indicates a J = 5 % plated finish I = 800 V J = 7 reel (low quantity) decimal point. K = 10 % min. 4 % lead G = 1000 V R = 11 1/4 /13 reel/ Examples: M = 20 % R = 1500 V plastic tape 1R0 = 1.0 pF F = 2000 V P = 11 1/4 /13 reel/ Note O = 2500 V paper tape Details see H = 3000 V Selection W = 3600 V Chart Note (1) DC voltage rating should not be exceeded in application ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes L Ni barrier with tin lead plated finish min. 4 % lead No No DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATIONS PAD (P) CASE LENGTH WIDTH MAXIMUM STYLE CODE (L) (W) THICKNESS (T) MINIMUM MAXIMUM 0.055 0.025 0.055 0.015 0.057 0.004 0.016 0505 VJ0505 (1.40 0.64) (1.40 0.38) (1.45) (0.10) (0.41) 0.117 0.028 0.110 0.030 0.102 0.012 0.018 1111 VJ1111 (2.98 0.70) (2.79 0.76) (2.59) (0.30) (0.46) 0.250 + 0.020/- 0.030 0.250 0.015 0.102 0.010 0.030 2525 VJ2525 (6.35 + 0.508/- 0.762) (6.35 0.381) (2.59) (0.25) (0.76) Revision: 13-Mar-14 Document Number: 45221 2 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000