VJ HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency FEATURES Case size 0402, 0603, 0805 Available High frequency Ultra-stable dielectric material Available Non-magnetic copper termination C Lead (Pb)-free terminations code X Tin / lead termination code L Available Surface mount, wet build process Reliable Noble Metal Electrode (NME) system Made with a combination of design, materials and tight process control to achieve very high field reliability Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. DESIGN TOOLS (click logo to get started) APPLICATIONS RF and microwave Broadband communication Satellite communication Base stations Medical instrumentation and test Military devices (radar, communication, etc.) Wireless devices ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified Operating Temperature: -55 C to +125 C Aging Rate: 0 % maximum per decade Capacitance Range: Insulation Resistance (IR): 0402: 0.1 pF to 82 pF at +25 C and rated voltage 100 000 M minimum or 1000 F, whichever is less 0603: 0.1 pF to 470 pF at +125 C and rated voltage 10 000 M minimum or 0805: 0.1 pF to 1.5 nF 100 F, whichever is less Voltage Rating: 25 V to 250 V DC DC Dielectric Strength Test: Temperature Coefficient of Capacitance (TCC): performed per method 103 of EIA-198-2-E. C0G (D): 0 ppm/C 30 ppm/C from -55 C to +125 C with Applied test voltages: zero (0) V applied DC 200 V -rated: min. 250 % of rated voltage DC > 200 V -rated: min. 200 % of rated voltage DC Dissipation Factor (DF): C0G (D): 0.05 % max. at 1.0 V and 1 MHz RMS for values 1000 pF C0G (D): 0.05 % max. at 1.0 V and 1 kHz RMS for values > 1000 pF Revision: 13-Dec-16 Document Number: 45071 1 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 200 0.1 pF 82 pF D = HIFREQ 0603 250 0.1 pF 470 pF 0805 250 0.1 pF 1.5 nF Note For values below 0.4 pF, contact mlccrf vishay.com ORDERING INFORMATION VJ0603 D 1R0 B X B A C CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING (1) CODE NOMINAL CODE TOLERANCE RATING 0402 D = HIFREQ Expressed in V = 0.05 pF C = non-magnetic X = 25 V A = no 0603 picofarads (pF). B = 0.10 pF copper barrier A = 50 V marking 0805 The first two digits C = 0.25 pF 100 % tin plate B = 100 V are significant, the D = 0.50 pF matte finish C = 200 V (2) third is a multiplier. F = 1 % E = AgPd T = 7 reel / plastic tape P = 250 V An R indicates a G = 2 % X = Ni barrier C = 7 reel / paper tape decimal point. J = 5 % 100 % tin plate O = 7 reel / flamed paper tape Examples: K = 10 % matte finish J = 7 reel (low quantity) 1R0 = 1.0 pF M = 20 % L = Ni barrier R = 11 1/4 / 13 reel / with tin lead plastic tape Note plated finish P = 11 1/4 / 13 reel / Details see min. 4 % lead paper tape Selection I = 11 1/4 / 13 reel / Chart flamed paper tape B = bulk Note I and O is used for E / N termination code Notes (1) DC voltage rating should not be exceeded in application (2) Termination code E is for conductive epoxy assembly ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN C Non-magnetic copper barrier 100 % tin plated matte finish Yes Yes X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd YesYes L Ni barrier tin lead plated with min. 4 % lead No No DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATIONS PAD (P) CASE LENGTH WIDTH MAXIMUM STYLE (1) CODE (L) (W) THICKNESS (T) MINIMUM MAXIMUM 0.040 0.004 0.020 0.004 0.021 0.004 0.016 0402 VJ0402 (1.02 0.10) (0.51 0.10) (0.61) (0.10) (0.41) 0.063 0.006 0.031 0.005 0.037 0.012 0.018 0603 VJ0603 (1.60 0.15) (0.80 0.12) (0.94) (0.30) (0.46) 0.079 0.008 0.049 0.008 0.057 0.010 0.028 0805 VJ0805 (2.00 0.20) (1.25 0.20) (1.45) (0.25) (0.71) Note (1) For Cu termination C add 0.01 mm to maximum pad terminations Revision: 13-Dec-16 Document Number: 45071 2 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000