VJ HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency FEATURES Case size 0402, 0505, 0603, 0805, 1111, 2525, and 3838 Available High frequency Available Ultra-stable, high Q dielectric material Non-magnetic copper termination C Lead (Pb)-free terminations code X Tin / lead termination code L Available Surface mount, wet build process Reliable Noble Metal Electrode (NME) system Made with a combination of design, materials, and tigh t process control to achieve very high field reliability Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS RF and microwave instruments LINKS TO ADDITIONAL RESOURCES Base stations Wireless devices Design Tools S-Parameters Broadband communication Medical instrumentation and test Military devices (radar, communication, etc.) Satellite communication ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified Operating Temperature: Temperature Coefficient of Capacitance (TCC): -55 C to +125 C C0G (D): 0 ppm/C 30 ppm/C from -55 C to +125 C with zero (0) V applied DC Capacitance Range: Dissipation Factor (DF): 0402: 0.1 pF to 82 pF C0G (D): 0.05 % max. at 1.0 V and 1 MHz 0505: 0.1 pF to 1.0 nF RMS for values 1000 pF 0603: 0.1 pF to 470 pF C0G (D): 0.05 % max. at 1.0 V and 1 kHz RMS 0805: 0.1 pF to 1.5 nF for values > 1000 pF 1111: 0.2 pF to 5.1 nF 2525: 1.0 pF to 3.0 nF Aging Rate: 0 % maximum per decade 3838: 1.0 pF to 12 nF Insulation Resistance (IR): Voltage Rating: at +25 C and rated voltage 100 000 M minimum or 0402: 25 V to 200 V 1000 F, whichever is less DC DC at +125 C and rated voltage 10 000 M minimum or 0505: 50 V to 250 V DC DC 100 F, whichever is less 0603: 25 V to 250 V DC DC 0805: 25 V to 250 V DC DC Dielectric Strength Test: performed per method 103 of EIA-198-2-E. 1111: 50 V to 1500 V DC DC 2525: 300 V to 3600 V DC DC Applied test voltages: 3838: 300 V to 7200 V DC DC 250 V -rated: min. 200 % of rated voltage DC > 250 V - to 1000 V -rated: min. 150 % of rated voltage DC DC 1500 V and up: 120 % rated voltage DC Revision: 14-Dec-2020 Document Number: 45258 1 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 200 0.1 pF 82 pF 0505 250 0.1 pF 1 nF 0603 250 0.1 pF 470 pF D = HIFREQ 0805 250 0.1 pF 1.5 nF 1111 1500 0.2 pF 5.1 nF 2525 3600 1.0 pF 3 nF 3838 7200 1.0 pF 12 nF ORDERING INFORMATION VJ0603 D 101 J X A A T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING (1) CODE NOMINAL CODE TOLERANCE RATING (3) 0402 D = HIFREQ Expressed in V = 0.05 pF X = Ni barrier X = 25 V A = unmarked 0505 picofarads (pF). B = 0.10 pF 100 % tin plate A = 50 V Q = marked 0603 The first two digits C = 0.25 pF matte finish B = 100 V 0805 are significant, the D = 0.50 pF C = non-magnetic K = 150 V T = 7 reel / plastic tape 1111 third is a multiplier. F = 1 % copper barrier C = 200 V C = 7 reel / paper tape 2525 An R indicates a G = 2 % 100 % tin plate P = 250 V O = 7 reel / flamed paper tape 3838 decimal point. J = 5 % matte finish D = 300 V J = 7 reel (low quantity) (2) Examples: K = 10 % E = AgPd E = 500 V R = 11 1/4 / 13 reel / 1R0 = 1.0 pF M = 20 % L = Ni barrier L = 630 V plastic tape with tin lead I = 800 V P = 11 1/4 / 13 reel / Note plated finish G = 1000 V paper tape Details see min. 4 % lead R = 1500 V I = 11 1/4 / 13 reel / Selection F = 2000 V flamed paper tape Chart O = 2500 V B = bulk H = 3000 V W = waffle pack W = 3600 V M = 5000 V Note S = 7200 V I and O is used for E termination code Notes (1) DC voltage rating should not be exceeded in application (2) Termination code E is for conductive epoxy assembly - only available for EIA case sizes 0402, 0603, and 0805 (3) Case size 0402 only available with A ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN C Non-magnetic copper barrier 100 % tin plated matte finish Yes Yes X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd YesYes L Ni barrier tin lead plated with min. 4 % lead No No Revision: 14-Dec-2020 Document Number: 45258 2 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000