VJ0603D430FXBAJ Vishay

VJ HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency FEATURES Case size 0402, 0505, 0603, 0805, 1111, 2525, and 3838 Available High frequency Available Ultra-stable, high Q dielectric material Non-magnetic copper termination C Lead (Pb)-free terminations code X Tin / lead termination code L Available Surface mount, wet build process Reliable Noble Metal Electrode (NME) system Made with a combination of design, materials, and tigh t process control to achieve very high field reliability Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details LINKS TO ADDITIONAL RESOURCES APPLICATIONS RF and microwave instruments Base stations Design Tools S-Parameters Simulation Infographics Videos Tools Wireless devices Broadband communication Medical instrumentation and test Related Military devices (radar, communication, etc.) Documents Satellite communication ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C unless otherwise specified Operating Temperature: Temperature Coefficient of Capacitance (TCC): -55 C to +125 C C0G (D): 0 ppm/C 30 ppm/C from -55 C to +125 C with zero (0) V applied DC Capacitance Range: Dissipation Factor (DF): 0402: 0.1 pF to 82 pF C0G (D): 0.05 % max. at 1.0 V and 1 MHz 0505: 0.1 pF to 1.0 nF RMS for values 1000 pF 0603: 0.1 pF to 470 pF C0G (D): 0.05 % max. at 1.0 V and 1 kHz RMS 0805: 0.1 pF to 1.5 nF for values > 1000 pF 1111: 0.2 pF to 5.1 nF 2525: 1.0 pF to 3.0 nF Aging Rate: 0 % maximum per decade 3838: 1.0 pF to 12 nF Insulation Resistance (IR): Voltage Rating: at +25 C and rated voltage 100 000 M minimum or 0402: 25 V to 200 V 1000 F, whichever is less DC DC at +125 C and rated voltage 10 000 M minimum or 0505: 50 V to 250 V DC DC 100 F, whichever is less 0603: 25 V to 250 V DC DC 0805: 25 V to 250 V DC DC Dielectric Strength Test: performed per method 103 of EIA-198-2-E. 1111: 50 V to 1500 V DC DC 2525: 300 V to 3600 V DC DC Applied test voltages: 3838: 300 V to 7200 V DC DC 250 V -rated: min. 200 % of rated voltage DC > 250 V - to 1000 V -rated: min. 150 % of rated voltage DC DC 1500 V and up: 120 % rated voltage DC Revision: 24-Mar-2021 Document Number: 45258 1 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 200 0.1 pF 82 pF 0505 250 0.1 pF 1 nF 0603 250 0.1 pF 470 pF D = HIFREQ 0805 250 0.1 pF 1.5 nF 1111 1500 0.2 pF 5.1 nF 2525 3600 1.0 pF 3 nF 3838 7200 1.0 pF 12 nF ORDERING INFORMATION VJ0603 D 101 J X A A T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING (1) (4) CODE NOMINAL CODE TOLERANCE RATING (3) 0402 D = HIFREQ Expressed in V = 0.05 pF X = Ni barrier X = 25 V A = unmarked 0505 picofarads (pF). B = 0.10 pF 100 % tin plate A = 50 V Q = marked 0603 The first two digits C = 0.25 pF matte finish B = 100 V 0805 are significant, the D = 0.50 pF C = non-magnetic K = 150 V T = 7 reel / plastic tape 1111 third is a multiplier. F = 1 % copper barrier C = 200 V C = 7 reel / paper tape 2525 An R indicates a G = 2 % 100 % tin plate P = 250 V O = 7 reel / flamed paper tape 3838 decimal point. J = 5 % matte finish D = 300 V J = 7 reel (low quantity) (2) Examples: K = 10 % E = AgPd E = 500 V R = 11 1/4 / 13 reel / 1R0 = 1.0 pF M = 20 % L = Ni barrier L = 630 V plastic tape with tin lead I = 800 V P = 11 1/4 / 13 reel / Note plated finish G = 1000 V paper tape Details see min. 4 % lead R = 1500 V I = 11 1/4 / 13 reel / Selection F = 2000 V flamed paper tape Chart O = 2500 V W = waffle pack H = 3000 V W = 3600 V Note M = 5000 V I and O is used for E S = 7200 V termination code Notes (1) DC voltage rating should not be exceeded in application (2) Termination code E is for conductive epoxy assembly - only available for EIA case sizes 0402, 0603, and 0805 (3) Case size 0402 only available with A (4) See Standard Packaging Quantities table ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN C Non-magnetic copper barrier 100 % tin plated matte finish Yes Yes X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd YesYes L Ni barrier tin lead plated with min. 4 % lead No No Revision: 24-Mar-2021 Document Number: 45258 2 For technical questions, contact: mlccrf vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000