VJ C0G (NP0) Vishay Vitramon Multilayer Ceramic Chip Capacitors FEATURES C0G is an ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) RoHS COMPLIANT of 0 30 ppm/C Low Dissipation Factor (DF) Ideal for critical timing and tuning applications GENERAL SPECIFICATIONS Ideal for snubber and surge suppression applications Protective surface coating of high voltage capacitors Note: Electrical characteristics at + 25 C unless otherwise specified maybe required to prevent surface arcing. Capacitance Range: 1.0 pF to 0.056 F Temperature Coefficient of Capacitance (TCC): Dielectric Withstanding Voltage (DWV): 0 30 ppm/C from - 55 C to + 125 C This is the maximum voltage the capacitors are tested for Dissipation Factor (DF): a 1 to 5 second period and the charge/discharge current does 0.1 % maximum at 1.0 V and 1 kHz for values > 1000 pF rms not exceed 50 mA 0.1 % maximum at 1.0 V and 1 MHz for values 1000 pF rms 200 Vdc : DWV at 250 % of rated voltage Insulation Resistance (IR): 500 Vdc: DWV at 200 % of rated voltage At + 25 C and rated voltage 100 000 M minimum or 630/1000 Vdc: DWV at 150 % of rated voltage 1000 F, whichever is less 3000 Vdc: DWV at 120 % of rated voltage At + 125 C and rated voltage 10 000 M minimum or 100 F, whichever is less ORDERING INFORMATION 3) 2) VJ0805 A 102 K X A A T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC MARKING PACKAGINGPROCESS CODE NOMINAL CODE TOLERANCE VOLTAGE CODE 1) RATING 0402 A = C0G (NP0) Expressed in B = 0.10 pF X = Ni barrier X = 25 V A = Unmarked picofarads C = 0.25 pF 100 % tin M = Marked 0603 A = 50 V (pF). The first D = 0.5 pF plated NOTE: Marking is 0805 B = 100 V two digits are F = 1 % F = AgPd only available for 1206 significant, the G = 2 % C = 200 V 0805 and 1206 third is a J = 5 % 1210 E = 500 V multiplier. An K = 10 % 1808 R indicates a Note: L = 630 V 1812 decimal point. B, C, D < 10 pF T = 7 reel/plastic tape G = 1000 V Examples: F, G, J, K 10 pF 1825 C = 7 reel/paper tape 102 = 1000 pF H = 3000 V 2220 1R8 = 1.8 pF R = 11 1/4 reel/plastic tape 2225 P = 11 1/4 reel/paper tape O = 7 reel/flamed paper tape I = 11 1/4 /13 reel/flamed paper tape Note: I and O is used for F termination paper taped Note 1. DC voltage rating should not be exceeded in application 2. Process Code may be added with up to three digits, used to control non-standard products and/or special requirements 3. Case size designator may be replaced by a four digit drawing number used to control non-standard products and/or requirements Document Number 45053 For technical questions, contact: MLCC vishay.com www.vishay.com Revision 13-Jul-07 5VJ C0G (NP0) Vishay Vitramon Multilayer Ceramic Chip Capacitors C0G (NP0) DIELECTRIC 1) STYLE VJ0603 VJ0805 VJ1206 VJ1210 VJ0402 EIA TYPE 0603 0805 1206 1210 0402 VOLTAGE (Vdc) 25 50 100 50 100 200 50 100 200 500 50 100 200 500 630 50 100 200 500 630 CAP. CAP. CODE 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.010 F 123 0.012 F 153 0.015 F 183 0.018 F 223 0.022 F 273 0.027 F 333 0.033 F 393 0.039 F 473 0.047 F 563 0.056 F Note 1. See soldering recommendations within this data book, or visit www.vishay.com/doc 45034 Available only in paper tape www.vishay.com For technical questions, contact: MLCC vishay.com Document Number 45053 6 Revision 13-Jul-07