VJ High Q www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency Applications FEATURES Ultra-stable dielectric offering a Temperature Coefficient of Capacitance (TCC) of 0 ppm/C 30 ppm/C over the entire temperature range Low Dissipation Factor (DF) Wet build process Available Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Ideal for critical timing applications Ideal for tuning applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at + 25 C unless otherwise specified. Operating Temperature: - 55 C to + 150 C Aging Rate: 0 % maximum per decade Voltage Range: 50 V to 200 V Insulation Resistance (IR): DC DC At + 25 C and rated voltage 100 000 M minimum or, Capacitance Range: 1.0 pF to 220 pF 1000 F whichever is less. At + 125 C and rated voltage 10 000 M minimum or Temperature Coefficient of Capacitance (TCC): 100 F, whichever is less. 0 ppm/C 30 ppm/C from - 55 C to + 125 C Dielectric Strength Test: Dissipation Factor (DF): Performed per method 103 of EIA 198-2-E. 0.1 % maximum at 1.0 V and 1 MHz for values 1000 pF RMS Applied test voltages: 0.1 % maximum at 1.0 V and 1 kHz for values > 1000 pF RMS 200 V -rated: 250 % of rated voltage DC Revision: 28-May-2018 Document Number: 45050 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ High Q www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0603 100 1.0 pF 100 pF HIGH Q C0G (NP0) 0805 200 1.0 pF 220 pF Note Detail ratings see Selection Chart ORDERING INFORMATION (2) VJ0805 Q 101 K X A A C CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING PROCESS (1) CODE NOMINAL TOLERANCE RATING CODE CODE 0603 Q = HIGH Q Expressed in B = 0.10 pF X = Ni barrier A = 50 V A = Unmarked 0805 picofarads (pF). C = 0.25 pF 100 % tin plated B = 100 V (3) The first two D = 0.5 pF F, E = AgPd C = 200 V C = 7 reel/paper tape digits are F = 1 % O = reel/flamed paper tape significant, the G = 2 % I = 11 1/4 /13 reel/flamed third is a J = 5 % paper tape multiplier. An K = 10 % P = 11 1/4 /13 reel/ Note R indicates a paper tape B, C, D < 10 pF decimal point. Note F, G, J, K 10 pF Examples: O and I are used for 101 = 100 pF F and E termination 1R8 = 1.8 pF Notes Size 0402 available with Vishay Basic Commodity series, see datasheet: www.vishay.com/doc 28534 (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc vishay.com (2) Process code may be added with up to three digits, used to control non-standard products and /or special requirements. (3) Termination code E is for conductive epoxy assembly. ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd Yes Yes FAgPd Yes No DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION MAXIMUM CASE LENGTH WIDTH (P) STYLE THICKNESS CODE (L) (W) (T) MINIMUM MAXIMUM 0.063 0.006 0.031 0.006 0.036 0.012 0.022 0603 VJ0603 (1.60 0.15) (0.80 0.15) (0.92) (0.30) (0.55) 0.079 0.008 0.049 0.008 0.057 0.010 0.030 0805 VJ0805 (2.00 0.20) (1.25 0.20) (1.45) (0.25) (0.76) Revision: 28-May-2018 Document Number: 45050 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000