VJ1206A103JXJTW1BC Vishay

VJ....W1BC Basic Commodity Series www.vishay.com Vishay Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATURES Available from 0402 to 1210 body sizes Ultra stable C0G (NP0) dielectric High capacitance in X5R, X7R, Y5V For high frequency applications Ni-barrier with 100 % tin terminations Dry sheet technology process Base Metal Electrode system (BME) Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Consumer electronics Telecommunications Data processing Mobile applications ELECTRICAL SPECIFICATIONS Operating Temperature: Test Conditions for Capacitance and DF Measurement: C0G (NP0): -55 C to +125 C measured at conditions of 30 % to 70 % related humidity. X5R: -55 C to +85 C C0G (NP0): Apply 1.0 V 0.2 V , 1.0 MHz 10 % for RMS RMS caps 1000 pF, at +25 C ambient temperature X7R: -55 C to +125 C Apply 1.0 V 0.2 V , 1.0 kHz 10 % for RMS RMS Y5V: -25 C to +85 C caps > 1000 pF, at +25 C ambient temperature X5R / X7R: Caps 10 F apply 1.0 V 0.2 V , RMS RMS Capacitance Range: (1) 1.0 kHz 10 %, at +25 C ambient temperature C0G (NP0): 0.5 pF to 39 nF Caps > 10 F apply 0.5 V 0.2 V , RMS RMS X5R: 47 nF to 220 F 120 Hz 20 %, at +25 C ambient temperature X7R: 100 pF to 47 F Y5V: Caps 10 F apply 1.0 V 0.2 V , RMS RMS 1.0 kHz 10 %, at +20 C ambient temperature Y5V: 10 nF to 100 F Caps > 10 F apply 0.5 V 0.2 V , RMS RMS 120 Hz 20 %, at +20 C ambient temperature Voltage Range: Note C0G (NP0): 10 V to 100 V DC DC (1) Test conditions: 0.5 V 0.2 V , 1 kHz 10 % RMS RMS X5R: 6.3 V to 50 V DC DC X7R: 0603: 2.2 F / 10 V 0805: 10 F (6.3 V and 10 V) X7R: 10 V to 100 V DC DC X5R: 0402: 4.7 F / 6.3 V and 2.2 F / 10 V Y5V: 6.3 V to 100 V DC DC 0603: 10 F (6.3 V and 10 V) Temperature Coefficient of Capacitance (TCC): Aging Rate: C0G (NP0): 0 ppm/C 30 ppm/C from -55 C to +125 C C0G (NP0): 0 % per decade X5R: 15 % from -55 C to +85 C without voltage applied X5R: 6.3 V / 10 V : 3 % maximum per decade DC DC X7R: 15 % from -55 C to +125 C without voltage applied 16 V / 25 V : 2 % maximum per decade DC DC Y5V: + 30 % / - 80 % from -25 C to +85 C without voltage X7R: 10 V : 1.5 % maximum per decade DC applied 16 V : 1 % maximum per decade DC Insulation Resistance (IR) at U : Y5V: 6.3 V : 12.5 % maximum per decade DC R 10 V / 16 V : 9 % maximum per decade DC DC 10 G or R x C 500 x F whichever is less 25 V : 7 % maximum per decade DC Test Conditions for Capacitance Tolerance: Dielectric Strength Test: preconditioning for X5R, X7R, Y5V MLCC: perform a heat this is the maximum voltage the capacitors are tested 1 s to treatment at +150 C 10 C for 1 h, then leave in ambient 5 s period and the charge / discharge current does not condition for 24 h 2 h before measurement exceed 50 mA. 100 V : 250 % of rated voltage DC Revision: 01-Dec-2020 Document Number: 28548 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay Dissipation Factor (DF): C0G (NP0): Cap. < 30 pF: Q 400 + 20C Cap. 30 pF: Q 1000 X5R, X7R: Y5V: RATED RATED D.F. EXCEPTION OF D.F. D.F. EXCEPTION OF D.F. VOLTAGE VOLTAGE 3 % 1206 0.47 F 0603 0.1 F 0805 0.47 F 50 V 5 % 7 % 1206 4.7 F 100 V 2.5 % 0603 0.068 F 0805 > 0.1 F 5 % 1206 > 1 F 35 V 7 % - - 0603 0.047 F 0805 0.18 F 0402 0.047 F 0603 0.1 F 3 % 1206 0.47 F 7 % 0805 0.33 F 1206 1 F 1210 4.7 F 25 V 5 % 50 V 2.5 % 5 % 1210 4.7 F 0402 0.068 F 0603 0.47 F 0402 0.1 F 0603 1 F 0805 1 F 9 % 10 % 1206 4.7 F 1210 22 F 1206 2.2 F 1210 10 F 9 % 0402 0.068 F 0603 0.68 F 16 V 5 % 0805 1 F 1210 10 F 7 % C < 1.0 F 12.5 % 0402 0.22 F 7 % 0603 0.33 F 1206 4.7 F 25 V 3.5 % 16 V 0603 2.2 F 0805 3.3 F 0402 0.10 F 0603 0.47 F 9 % 12.5 % C 1.0 F 1206 10 F 1210 22 F 10 % 0805 2.2 F 1206 6.8 F 1210 22 F 10 V 12.5 % 20 % 0402 0.47 F 0402 0.033 F 0603 0.15 F 6.3 V 20 % - - 5 % 0805 0.68 F 1206 2.2 F 1210 4.7 F 16 V 3.5 % 0402 0.22 F 0603 0.68 F 10 % 0805 2.2 F 1206 4.7 F 1210 22 F 0402 0.33 F 0402/X7R 0.22 F 10 % 0603 0.33 F 0805 2.2 F 10 V 5 % 1206 2.2 F 1210 22 F 15 % 0402 1 F 0402 1 F 0603 10 F 15 % 0805 4.7 F 1206 47 F 6.3 V 10 % 1210 100 F 20 % 0402 2.2 F 4 V 15 % - - QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 100 0.5 pF 1.0 nF 0603 100 0.5 pF 3.3 nF C0G (NP0) 0805 100 0.5 pF 12 nF 1206 100 1.5 pF 39 nF 0402 50 47 nF 10 F 0603 50 220 nF 22 F X5R 0805 50 1.5 F 47 F 1206 50 1.5 F 100 F 1210 50 1.5 F 220 F 0402 50 100 pF 1 F 0603 100 100 pF 2.2 F X7R 0805 100 100 pF 10 F 1206 100 150 pF 22 F 1210 100 1.0 nF 47 F 0402 50 10 nF 470 nF 0603 50 10 nF 2.2 F Y5V 0805 100 10 nF 10 F 1206 100 10 nF 22 F 1210 100 10 nF 100 F Note Detail ratings see Selection Chart Revision: 01-Dec-2020 Document Number: 28548 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000