VJ X8R www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Temperature Applications Up to 150 C FEATURES Specialty: high temperature applications High operating temperature dielectric: 150 C Maintains capacitance at high temperature for frequency stability Wet build process Available Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS High temperature modules ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified. Operating Temperature: -55 C to +150 C Aging Rate: 1 % maximum per decade Capacitance Range: 330 pF to 220 nF Insulation Resistance (IR): at +25 C and rated voltage 100 000 M minimum or Voltage Range: 25 V to 100 V DC DC 1000 F, whichever is less at +125 C and rated voltage 10 000 M minimum or Temperature Coefficient of Capacitance (TCC): 100 F, whichever is less 15 % from -55 C to +150 C Dielectric Strength Test: Dissipation Factor (DF): performed per method 103 of EIA-198-2-E 25 V ratings: 3.5 % maximum at 1.0 V and 1 kHz RMS Applied test voltage: > 25 V ratings: 2.5 % maximum at 1.0 V and 1 kHz RMS 100 V -rated: 250 % of rated voltage DC Revision: 02-Mar-2021 Document Number: 45006 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ X8R www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 100 330 pF 6.8 nF 0603 100 470 pF 33 nF X8R 0805 100 470 pF 100 nF 1206 50 1.0 nF 220 nF 1210 50 10 nF 220 nF Note Detail ratings see Selection Chart ORDERING INFORMATION (2) VJ0805 H 102 K X A A C (4) CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING PROCESS (1) CODE NOMINAL TOLERANCE RATING CODE CODE 0402 H = X8R Expressed in J = 5 % X = Ni barrier X = 25 V A = unmarked 0603 picofarads (pF). 100 % tin plated M = marked K = 10 % A = 50 V (3)(5) 0805 The first two F, E = AgPd Note M = 20 % B = 100 V 1206 digits are Marking is only 1210 significant, the available for third is a 0805 and 1206 multiplier. with termination Examples: code X 102 = 1000 pF T = 7 reel / plastic tape C = 7 reel / paper tape R = 11 1/4 / 13 reel / plastic tape P = 11 1/4 / 13 reel / paper tape O = 7 reel / flamed paper tape I = 11 1/4 / 13 reel / flamed paper tape Note I and O are used for F termination size 0603 / 0805 and E termination size 0402 / 0603 / 0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc vishay.com (2) Process code may be added with up to three digits, used to control non-standard products and requirements (3) Termination code E for conductive epoxy assembly (4) Marking in reference to EIA198, see www.vishay.com/doc 45028 (5) Termination code F not available for 0402, 0603 - 100 V, 0805 - 100 V ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes EAgPd Yes Yes FAgPd Yes No Revision: 02-Mar-2021 Document Number: 45006 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000