VJ1206Y333JXCMT Vishay

VJ Commercial Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications FEATURES C0G (NP0) and X7R/X5R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a very low Temperature Coefficient of Capacitance (TCC) C0G (NP0) offers low dissipation Excellent aging characteristics Ideal for decoupling and filtering (X7R) Ideal for surge suppression and high voltage applications Wide range of case sizes, voltage ratings and capacitance values Wet build process Reliable Noble Metal Electrode (NME) system Compliant to RoHS Directive 2002/95/EC Halogen-free according to IEC 61249-2-21 definition APPLICATIONS Timing and tuning circuits Sensor and scanner applications Decoupling and filtering Surge suppression ELECTRICAL SPECIFICATIONS C0G (NP0) DIELECTRIC X5R, X7R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Note Electrical characteristics at + 25 C unless otherwise specified Electrical characteristics at + 25 C unless otherwise specified Operating Temperature: - 55 C to + 150 C Operating Temperature: - 55 C to + 150 C (above + 125 C changed characteristics) (X5R above + 85 C changed characteristics) (X7R above + 125 C changed characteristics) Capacitance Range: 1 pF to 56 nF Capacitance Range: 120 pF to 6.8 F Voltage Range: 25 V to 1000 V DC DC Voltage Range: 10 V to 1000 V DC DC Temperature Coefficient of Capacitance (TCC): 0 ppm/C 30 ppm/C from - 55 C to + 125 C Temperature Coefficient of Capacitance (TCC): X5R: 15 % from - 55 C to + 85 C, with 0 V applied DC Dissipation Factor (DF): X7R: 15 % from - 55 C to + 125 C, with 0 V applied DC 0.1 % maximum at 1.0 V and RMS 1 MHz for values 1000 pF Dissipation Factor (DF): 0.1 % maximum at 1.0 V and RMS 10 V ratings: 5 % maximum at 1.0 V and 1 kHz RMS 1 kHz for values > 1000 pF 16 V/25 V ratings: 5 % maximum at 1.0 V and 1 kHz RMS > 25 V ratings: 3.5 % maximum at 1.0 V and 1 kHz RMS Insulating Resistance: At + 25 C 100 000 M min. or 1000 F whichever is less Insulating Resistance: At + 125 C 10 000 M min. or 100 F whichever is less At + 25 C 100 000 M min. or 1000 F whichever is less At + 125 C 10 000 M min. or 100 F whichever is less Aging Rate: 0 % maximum per decade Aging Rate: 1 % maximum per decade Dielectric Strength Test: Performed per method 103 of EIA 198-2-E Dielectric Strength Test: Applied test voltages Performed per method 103 of EIA 198-2-E. 200 V -rated: 250 % of rated voltage DC Applied test voltages 500 V -rated: 200 % of rated voltage DC 250 V -rated: 250 % of rated voltage DC 630 V ,1000 V -rated: 150 % of rated voltage DC DC 500 V -rated: min. 150 % of rated voltage DC 630 V , 1000 V -rated: 150 % of rated voltage DC DC Revision: 14-Oct-11 Document Number: 45199 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ Commercial Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 100 1.0 pF 220 pF 0603 200 1.0 pF 820 pF 0805 500 1.0 pF 4.7 nF 1206 630 1.0 pF 10 nF 1210 630 56 pF 22 nF C0G (NP0) 1808 1000 18 pF 10 nF 1812 1000 39 pF 22 nF 1825 500 100 pF 39 nF 2220 1000 270 pF 47 nF 2225 1000 270 pF 56 nF X5R 0805 10 560 nF 1.0 F 0402 100 120 pF 47 nF 0603 200 330 pF 150 nF 0805 250 330 pF 470 nF 1206 630 330 pF 1.0 F 1210 630 390 pF 1.0 F X7R 1808 1000 470 pF 270 nF 1812 1000 1.0 nF 1.0 F 1825 1000 10 nF 2.7 F 2220 500 15 nF 2.2 F 2225 1000 33 nF 4.7 F 3640 500 27 nF 6.8 F Note Detail ratings see selection chart ORDERING INFORMATION (3) (2) VJ0805 Y 102 K X A A T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC MARKING PACKAGING PROCESS CODE NOMINAL CODE TOLERANCE VOLTAGE CODE (1) RATING 0402 A = C0G Expressed in B = 0.10 pF X = Ni barrier Q = 10 V A = C = 7 reel/paper tape 0603 (NP0) picofarads (pF). C = 0.25 pF 100 % tin plated J = 16 V Unmarked T = 7 reel/plastic tape 0805 Y = X7R The first two D = 0.5 pF matte finish X = 25 V M = Marked P = 11 1/4 /13 reel/ (4) 1206 G = X5R digits are F = 1 % F, E = AgPd A = 50 V Note: paper tape 1210 significant, the G = 2 % B = Polymer B = 100 V Marking is R = 11 1/4 /13 reel/ 1808 third is a J = 5 % 100 % tin plated C = 200 V only plastic tape (5) 1812 multiplier. K = 10 % matte finish P = 250 V available for O = 7 reel/flamed 1825 Examples M = 20 % E = 500 V 0805 and paper tape 2220 1R8 = 1.8 pF Note: L = 630 V 1206 with I = 11 1/4 /13 reel/flamed 2225 102 = 1000 pF C0G (NP0): G = 1000 V termination paper tape 3640 B, C, D < 10 pF code X Note: F, G, J, K 10 pF I and O are used for X7R/X5R: F, E termination J, K, M size 0402/0603/0805 Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc vishay.com (2) Process code may be added with up to three digits, used to control non-standard products and/or special requirements (3) Case size designator may be replaced by four digit drawing number used to control non-standard products and/or special requirements (4) Selected values for X5R, see selection chart (5) Selected values available, contact mlcc vishay.com for list of released ratings (6) Termination code E is for conductive epoxy assembly Revision: 14-Oct-11 Document Number: 45199 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000