VJ1210Y103KXAAT Vishay

VJ Commercial Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a very low Temperature Coefficient of Capacitance (TCC) C0G (NP0) offers low dissipation Excellent aging characteristics Ideal for decoupling and filtering (X7R) Available Ideal for surge suppression and high voltage applications Wide range of case sizes, voltage ratings and capacitance values Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Timing and tuning circuits Sensor and scanner applications Decoupling and filtering Surge suppression ELECTRICAL SPECIFICATIONS C0G (NP0) DIELECTRIC X7R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Note Electrical characteristics at +25 C unless otherwise specified Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +150 C Operating Temperature: -55 C to +150 C (above +125 C changed characteristics) (above +125 C changed characteristics) Capacitance Range: 1 pF to 56 nF Capacitance Range: 120 pF to 6.8 F Voltage Range: 25 V to 1000 V Voltage Range: 16 V to 1000 V DC DC DC DC Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC): 0 ppm/C 30 ppm/C from -55 C to +125 C 15 % from -55 C to +125 C, with 0 V applied DC Dissipation Factor (DF): Dissipation Factor (DF): 0.1 % maximum at 1.0 V and 16 V / 25 V ratings: 3.5 % maximum at 1.0 V and 1 kHz RMS RMS 1 MHz for values 1000 pF > 25 V ratings: 2.5 % maximum at 1.0 V and 1 kHz RMS 0.1 % maximum at 1.0 V and RMS Insulating Resistance: 1 kHz for values > 1000 pF at +25 C 100 000 M min. or 1000 F whichever is less Insulating Resistance: at +125 C 10 000 M min. or 100 F whichever is less at +25 C 100 000 M min. or 1000 F whichever is less Aging Rate: 1 % maximum per decade at +125 C 10 000 M min. or 100 F whichever is less Dielectric Strength Test: Aging Rate: 0 % maximum per decade performed per method 103 of EIA 198-2-E. Dielectric Strength Test: Applied test voltages performed per method 103 of EIA 198-2-E. 250 V -rated: 250 % of rated voltage DC Applied test voltages 500 V -rated: min. 150 % of rated voltage DC 200 V -rated: 250 % of rated voltage 630 V , 1000 V -rated: min. 120 % of rated voltage DC DC DC 500 V -rated: 200 % of rated voltage DC 630 V ,1000 V -rated: 150 % of rated voltage DC DC Revision: 10-Apr-2019 Document Number: 45199 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ Commercial Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 0402 100 1.0 pF 220 pF 0603 250 1.0 pF 1.0 nF 0805 500 1.0 pF 4.7 nF 1206 630 1.0 pF 10 nF 1210 630 56 pF 12 nF C0G (NP0) 1808 1000 27 pF 10 nF 1812 1000 39 pF 22 nF 1825 500 100 pF 39 nF 2220 1000 270 pF 47 nF 2225 1000 270 pF 56 nF 0402 100 120 pF 47 nF 0603 200 330 pF 150 nF 0805 250 330 pF 470 nF 1206 630 330 pF 1.0 F 1210 630 390 pF 1.0 F X7R 1808 1000 470 pF 270 nF 1812 1000 1.0 nF 1.0 F 1825 1000 10 nF 2.7 F 2220 500 15 nF 2.2 F 2225 1000 33 nF 4.7 F 3640 500 27 nF 6.8 F Note Detail ratings see Selection Chart Revision: 10-Apr-2019 Document Number: 45199 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000