VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Available Approved IEC 60384-14 Specialty: safety certified capacitors AEC-Q200 qualified available with PPAP for size 2008 and 2220 Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Power supplies EMI and AC line filtering EV charging systems AC equipment and appliances Lighting strike and voltage surge protection Isolators Facsimile and telephone ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Insulating Resistance: (1) at +25 C 100 000 M min. or 1000 F whichever is less Capacitance Range X1 / Y2 : 100 pF to 4.7 nF at +125 C 10 000 M min. or 100 F whichever is less (1) Capacitance Range X2 : 100 pF to 12 nF Aging Rate: 1 % maximum per decade Voltage Range: 250 V AC Voltage Proof Test: Temperature Coefficient of Capacitance (TCC): X1 / Y2: min. 1500 V AC 15 % from -55 C to +125 C, with 0 V applied DC X2: min. 1075 V DC (1) Dissipation Factor (DF) : Peak Impulse Voltage: C < 100 pF: 8 % maximum X1 / Y2: 5000 V C 100 pF: 2.5 % maximum X2: 2500 V Note Voltage Rating DC: (1) Test conditions per IEC 60384-14: X1 / Y2: 2000 V DC Voltage: 1.0 V RMS X2: 1500 V DC C < 100 pF at 1 MHz Climatic Category According to EN 60068-1: C 100 pF at 1 kHz 55/125/21 Revision: 19-Feb-2019 Document Number: 45020 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ Safety Certified Capacitors X7R www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V ) MINIMUM MAXIMUM AC 2008 250 100 pF 1.0 nF X7R (X1 / Y2) 2012 250 150 pF 1.2 nF 2220 250 270 pF 4.7 nF 2008 250 100 pF 2.7 nF X7R (X2) 2012 250 150 pF 5.6 nF 2220 250 270 pF 12 nF Notes Detail ratings see Selection Chart Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepag e distance ORDERING INFORMATION (1)(2) VJ2008 Y 102 K X U S T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION AC VOLTAGE MARKING PACKAGING PROCESS CODE NOMINAL CODE TOLERANCE RATING CODE 2008 Y = X7R Expressed in K = 10 % X = Ni barrier U = 250 V S = marked T = 7 reel / X1 = X1 / Y2 AC 2012 picofarads (pF). M = 20 % 100 % tin plated (see Part Marking plastic tape X2 = X2 2220 The first two table below) Vishay digits are automotive significant, the grade per third is a multiplier. customer Examples: request 102 = 1000 pF add A: X1A = X1 / Y2 X2A = X2 Notes (1) Process code must be added to control products and requirements (2) Vishay automotive grade X1A and X2A only for size 2008 and 2220 Detail ratings see Selection Chart PART MARKING ST ND 1 DIGIT 2 DIGIT MARKING MANUFACTURER DIELECTRIC AND RATING VA A = X7R, X1 / Y2 V = Vishay VM M = X7R, X2 DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION MAXIMUM CASE PART ORDERING LENGTH WIDTH (P) THICKNESS CODE NUMBER (L) (W) (T) MINIMUM MAXIMUM 0.086 0.010 0.030 0.200 0.010 0.080 0.010 2008 VJ2008 (5.08 0.25) (2.03 0.25) (2.18) (0.25) (0.76) 0.200 0.010 0.126 0.008 0.086 0.010 0.030 2012 VJ2012 (5.08 0.25) (3.20 0.20) (2.18) (0.25) (0.76) Revision: 19-Feb-2019 Document Number: 45020 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000