VJ OMD Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
Open Mode Design (OMD) reduces risk of
shorts or leakage in board flex applications
Excellent reliability and thermal shock
performance
Efficient low-power consumption, ripple
current capable to 1.2 A at 100 kHz
RMS
High voltage breakdown compared to
standard design
Available
100 % voltage conditioning available up to
630 V rating (process code 5H)
DC
Contact mlcc@vishay.com for higher voltages
Polymer termination available for intensive board flex
requirements
Wet build process
Reliable Noble Metal Electrode (NME) system
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Demanding boardflex applications
Input filter capacitors
Output filter capacitors
Snubber capacitors reduce MOSFET voltage spikes
Filtering for switching power supplies
For lighting and other AC applications please contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
C0G (NP0) X7R
GENERAL SPECIFICATION GENERAL SPECIFICATION
Note Note
Electrical characteristics at +25 C unless otherwise specified Electrical characteristics at +25 C unless otherwise specified
Operating Temperature: -55 C to +125 C Operating Temperature: -55 C to +125 C
Capacitance Range: 10 pF to 47 nF Capacitance Range: 100 pF to 1.8 F
Voltage Range: 50 V to 3000 V Voltage Range: 16 V to 3000 V
DC DC DC DC
Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC):
0 ppm/C 30 ppm/C from -55 C to +125 C 15 % from -55 C to +125 C, with 0 V applied
DC
Dissipation Factor (DF): Dissipation Factor (DF):
0.1 % maximum at 1.0 V and < 50 V ratings 3.5 % maximum at 1.0 V and 1 kHz
RMS RMS
1 MHz for values 1000 pF
50 V ratings 2.5 % maximum at 1.0 V and 1 kHz
RMS
0.1 % maximum at 1.0 V and
RMS
Insulating Resistance:
1 kHz for values > 1000 pF
at +25 C 100 000 M min. or 1000 F whichever is less
Insulating Resistance:
at +125 C 10 000 M min. or 100 F whichever is less
at +25 C 100 000 M min. or 1000 F whichever is less
Aging Rate: 1 % maximum per decade
at +125 C 10 000 M min. or 100 F whichever is less
Dielectric Strength Test:
Aging Rate: 0 % maximum per decade
performed per method 103 of EIA 198-2-E
Dielectric Strength Test:
Applied test voltages
performed per method 103 of EIA 198-2-E
250 V -rated: 250 % of rated voltage
DC
Applied test voltages
500 V -rated: min. 150 % of rated voltage
DC
200 V -rated: 250 % of rated voltage
DC 630 V / 1000 V -rated: 150 % of rated voltag e
DC
DC
500 V -rated: 200 % of rated voltage
DC 1500 V to 3000 V -rated: 120 % of rated voltage
DC DC
630 V / 1000 V -rated: 150 % of rated voltage
DC
DC
1500 V to 3000 V -rated: 120 % of rated voltage
DC
DC
Revision: 08-Jan-2020 Document Number: 45198
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
CAPACITANCE
MAXIMUM VOLTAGE
DIELECTRIC CASE
(V)
MINIMUM MAXIMUM
1206 1500 10 pF 4.7 nF
1210 2000 10 pF 8.2 nF
1808 3000 27 pF 8.2 nF
C0G (NP0) 1812 3000 27 pF 18 nF
1825 1000 15 pF 33 nF
2220 1000 270 pF 39 nF
2225 1000 270 pF 47 nF
0805 630 470 pF 220 nF
1206 2000 270 pF 680 nF
1210 2000 390 pF 1.0 F
1808 3000 220 pF 18 nF
X7R
1812 3000 100 pF 1.2 F
1825 2000 5.6 nF 1.5 F
2220 3000 1.0 nF 1.8 F
2225 2000 5.6 nF 1.8 F
Note
Detail ratings see Selection Chart
ORDERING INFORMATION
(2)
VJ1210 Y 474 J X A A T #
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC MARKING PACKAGING PROCESS
(4)
CODE NOMINAL TOLERANCE VOLTAGE CODE
(1)
CODE RATING
0805 A = C0G Expressed in F = 1 % X = Ni barrier J = 16 V A = 4X =
1206 (NP0) picofarads (pF). G = 2 % 100 % tin plated X = 25 V unmarked OMD cap
1210 Y = X7R The first two J = 5 % matte finish A = 50 V 5H =
(3)
1808 digits are K = 10 % E = AgPd B = 100 V OMD cap
C = 7" reel / paper tape
1812 significant, the M = 20 % B = polymer C = 200 V 100 %
T = 7" reel / plastic tape
1825 third is a Note 100 % tin plated P = 250 V voltage
P = 11 1/4" / 13" reel /
(5)
2220 multiplier. An R C0G (NP0): matte finish E = 500 V conditioning
paper tape
2225 indicates a F, G, J, K L = 630 V
R = 11 1/4" / 13" reel /
decimal point. X7R: G = 1000 V
plastic tape
Examples J, K, M R = 1500 V
O = 7" reel / flamed
474 = 470 000 pF F = 2000 V
paper tape
H = 3000 V
I = 11 1/4" / 13" reel /
flamed paper tape
Note
I and O are used for
E termination size 0805
Notes
(1)
DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance
Consult for questions: mlcc@vishay.com
(2)
Process code with 2 digits has to be added
(3)
Termination code E is for conductive epoxy assembly
(4)
Other termination options contact mlcc@vishay.com for availability
(5)
Polymer termination, code B, only available in plastic tape T / R
ENVIRONMENTAL STATUS
TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN
X Ni barrier 100 % tin plated matte finish Yes Yes
EAgPd Yes Yes
B Polymer layer, 100 % tin plated matte finish Yes No
Revision: 08-Jan-2020 Document Number: 45198
2
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000