VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive ceramic formulation for Available repeated charge and discharge cycles High pulse discharge currents Excellent reliability and high voltage performance Available with tin / lead barrier termination (code L) Wet built process Reliable Noble Metal Electrode (NME) system Made with a combination of design, materials and tight process control to achieve very high field reliability Resistor glass overglaze contains lead Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. APPLICATIONS Detonation devices (munitions, pyrotechnic, blasting) Down hole drilling Electronic fuzing ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Aging Rate: 1 % maximum per decade Capacitance Range: 33 nF to 560 nF Insulation Resistance (IR): at +25 C without resistor: 100 000 M minimum or 1000 F, Voltage Range: 1000 V to 1500 V DC DC whichever is less. at +125 C without resistor: 10 000 M minimum or 100 F, Temperature Coefficient of Capacitance (TCC): whichever is less. X5P: 10 % from -55 C to +85 C, with 0 V applied DC X7R: 15 % from -55 C to +125 C, with 0 V applied DC Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Parallel Resistor: 500 M 30 % Applied test voltages: 1000 V / 1500 V -rated: 120 % of rated voltage DC DC Dissipation Factor (DF): 2.5 % maximum at 1.0 V and 1 kHz RMS Revision: 04-May-16 Document Number: 45203 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ Controlled Discharge Capacitor (CDC) www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V) MINIMUM MAXIMUM 3040 1500 33 nF 220 nF X7R (X5P) 3640 1500 47 nF 330 nF 4044 1500 100 nF 560 nF Note Detail ratings see Selection Chart ORDERING INFORMATION (3) (2) VJ3640 Y 184 K X R A T 8R CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING PROCESS (1) CODE NOMINAL CODE TOLERANCE RATING CODE 3040 Y = X7R Expressed in J = 5 % X = Ni barrier G = 1000 V A = unmarked T = 7 reel / plastic tape 3640 (X5P) picofarads (pF). K = 10 % 100 % tin plate R = 1500 V 4044 The first two digits M = 20 % matte finish are significant, L = Ni barrier the third is a with tin lead multiplier. plated finish Examples: min. 4 % lead 184 = 180 nF 334 = 330 nF Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance Consult for questions: mlcc vishay.com (2) Process Code must be added to control special requirements (3) Size designator may be replaced by four digit drawing number used to control non-standard products and / or special requirements DIMENSIONS in inches millimeters W L T MAX. P TERMINATION PART MAXIMUM LENGTH WIDTH (P) CASE CODE ORDERING THICKNESS (L) (W) NUMBER (T) MINIMUM MAXIMUM 0.300 0.015 0.400 0.015 0.100 0.010 0.030 3040 VJ3040 7.62 0.38 10.20 0.38 2.54 0.25 0.76 (1) 0.360 0.015 0.400 0.015 0.120 0130 0.010 0.030 3640 VJ3640 9.14 0.38 10.20 0.38 3.05 3.30 0.25 0.76 0.400 0.015 0.440 0.015 0.120 0.020 0.040 4044 VJ4044 10.16 0.38 11.17 0.38 3.05 0.50 1.00 Note (1) Thickness used for 3640 - 1500 V - 220 nF and 270 nF Revision: 04-May-16 Document Number: 45203 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000