End of Life May-2021 VLMS322.., VLMK322.. www.vishay.com Vishay Semiconductors Power SMD LED PLCC-4 FEATURES 3 cathode pins, 1 anode pin Available in 8 mm tape High brightness SMD LED Luminous intensity and color categorized per packing unit Luminous intensity ratio per packing unit I /I 1.6 Vmax. Vmin. 19210 ESD-withstand voltage: up to 2 kV according to DESCRIPTION JESD22-A114-B The VLMS322.. and VLMK322.. series are an advanced Suitable for all soldering methods according to development in terms of heat dissipation. CECC 00802 and J-STD-020 The leadframe profile of this PLCC-4 SMD package is Preconditioning according to JEDEC level 2 optimized to reduce the thermal resistance. Qualified according to JEDEC moisture sensitivity level 2 This allows higher drive current and doubles the light output Compatible with IR reflow solder processes according to compared to Vishays high intensity SMD LED in PLCC-2 CECC 00802 and J-STD-020 package. AEC-Q101 qualified Material categorization: for definitions of compliance PRODUCT GROUP AND PACKAGE DATA please see www.vishay.com/doc 99912 Product group: LED Package: SMD PLCC-4 APPLICATIONS Product series: power Interior and exterior lighting Angle of half intensity: 60 Indicator and backlighting purposes for audio, video, LCDs, switches, symbols, illuminated advertising etc. Illumination purpose, alternative to incandescent lamps General use PARTS TABLE LUMINOUS FORWARD WAVELENGTH INTENSITY VOLTAGE at I at I at I F F F (nm) PART COLOR TECHNOLOGY (mcd) (V) (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMS322T2V1-GS08 Super red 355 450 900 50 625 630 640 50 1.7 2.1 2.6 50 AlInGaP on GaAs VLMK322U1V2-GS08 Amber 450 750 1125 50 610 - 621 50 - 1.9 2.6 50 AlInGaP on GaAs ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLMS322.., VLMK322.. PARAMETER TEST CONDITION SYMBOL VALUE UNIT (1) Reverse voltage V 5V R Forward current I 70 mA F Power dissipation at RT P 225 mW tot Junction temperature T 125 C j Operating temperature range T -40 to +100 C amb Storage temperature range T -40 to +100 C stg Thermal resistance junction-to-ambient Mounted on PC board FR4 R 290 K/W thJA Note (1) Driving the LED in reverse direction is suitable for short term application Rev. 1.7, 01-Feb-2021 Document Number: 81183 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life May-2021 VLMS322.., VLMK322.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMS322.., SUPER RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 50 mA VLMS322T2V1 I 355 450 900 mcd F V Dominant wavelength I = 50 mA 625 630 640 nm F d Spectral bandwidth at 50 % I I = 50 mA -18 - nm rel max. F Angle of half intensity I = 50 mA - 60 - F Forward voltage (2) I = 50 mA V 1.7 2.1 2.6 V F F Reverse current V = 5 V I -0.01 10 A R R Notes (1) In one packing unit I /I 1.6 Vmax. Vmin. (2) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMK322.., AMBER PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 50 mA VLMK322U1V2 I 450 750 1125 mcd F V Dominant wavelength I = 50 mA 610 - 621 nm F d Spectral bandwidth at 50 % I I = 50 mA -18 - nm rel max. F Angle of half intensity I = 50 mA - 60 - F (2) Forward voltage I = 50 mA V 1.7 2.1 2.6 V F F Reverse current V = 5 V I -0.01 10 A R R Notes (3) In one packing unit I /I 1.6 Vmax. Vmin. (4) Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. T2 355 450 U1 450 560 U2 560 715 V1 715 900 V2 900 1125 Note Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable COLOR CLASSIFICATION AMBER GROUP DOM. WAVELENGTH (nm) MAX. MAX. W 610 615 X 615 621 Note Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm Rev. 1.7, 01-Feb-2021 Document Number: 81183 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000