VLMT3100 www.vishay.com Vishay Semiconductors Low Current SMD LED PLCC-2 FEATURES SMD LED with exceptional brightness Compatible with automatic placement equipment EIA and ICE standard package Compatible with infrared, vapor phase and wave solder processes according to CECC Available in 8 mm tape 19225 Low profile package DESCRIPTION Non-diffused lens: excellent for coupling to light pipes and backlighting These new devices have been designed to meet the increasing demand for low current SMD LEDs. Very low power consumption The package of the VLMT3100 is the PLCC-2 (equivalent to Luminous intensity ratio in one packaging unit a size B tantalum capacitor). I /I 1.6 Vmax. Vmin. It consists of a lead frame which is embedded in a white AEC-Q101 qualified thermoplast. The reflector inside this package is filled up Material categorization: for definitions of compliance with clear epoxy. please see www.vishay.com/doc 99912 PRODUCT GROUP AND PACKAGE DATA APPLICATIONS Product group: LED Automotive: backlighting in dashboards and switches Package: SMD PLCC-2 Telecommunication: indicator and backlighting in Product series: Low current telephone and fax Angle of half intensity: 60 Indicator and backlight for audio and video equipment Indicator and backlight for battery driven equipment Small indicator for outdoor applications Indicator and backlight in office equipment Flat backlight for LCDs, switches, and symbols General use PARTS TABLE LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at I at I at I F F F (mcd) (nm) (V) PART COLOR TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMT3100-GS08 Red 0.28 1.1 - 2 612 618 625 2 - 2.2 2.9 2 GaAsP on GaP VLMT3100-GS18 Red 0.28 1.1 - 2 612 618 625 2 - 2.2 2.9 2 GaAsP on GaP ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLMT3100 PARAMETER TEST CONDITION SYMBOL VALUE UNIT (1) Reverse voltage V 6V R DC forward current I 7mA F Surge forward current t 10 s I 0.5 A p FSM Power dissipation P 20 mW V Junction temperature T 100 C j Operating temperature range T -40 to +100 C amb Storage temperature range T -40 to +100 C stg Soldering temperature t 5 s T 260 C sd 2 Thermal resistance junction / ambient Mounted on PC board (pad size > 16 mm)R 500 K/W thJA Note (1) Driving the LED in reverse direction is suitable for short term application Rev. 1.4, 03-Aug-15 Document Number: 81710 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VLMT3100 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMT3100, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 2 mA I 0.28 1.1 - mcd F V Dominant wavelength I = 2 mA 612 618 625 nm F d Peak wavelength I = 2 mA - 635 - nm F p Angle of half intensity I = 2 mA - 60 - deg F Forward voltage I = 2 mA V -2.2 2.9 V F F Reverse voltage I = 10 A V 615 - V R R Junction capacitance V = 0 V, f = 1 MHz C -50- pF R j Note (1) In one packing unit I /I 1.6 Vmax. Vmin. Note LUMINOUS INTENSITY CLASSIFICATION Luminous intensity is tested at a current pulse duration of 25 ms LUMINOUS INTENSITY (mcd) and an accuracy of 11 %. GROUP MIN. MAX. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be C1 0.28 0.36 shipped on each reel (there will be no mixing of two groups on C2 0.36 0.45 each reel). In order to ensure availability, single brightness groups will not be orderable. D1 0.45 0.56 In a similar manner for colors where wavelength groups are D2 0.56 0.71 measured and binned, single wavelength groups will be shipped E1 0.71 0.90 on any one reel. In order to ensure availability, singe wavelength groups will not E2 0.9 1.12 be orderable. F1 1.12 1.4 F2 1.4 1.8 G1 1.8 2.24 G2 2.24 2.8 TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb 0 10 20 10 30 8 40 6 1.0 0.9 50 4 0.8 60 2 70 0.7 0 80 0 20 40 60 80 100 0.6 0.4 0.2 0 95 10842 T - Ambient Temperature (C) amb 95 10319 Fig. 1 - Forward Current vs. Ambient Temperature Fig. 2 - Relative Luminous Intensity vs. Angular Displacement Rev. 1.4, 03-Aug-15 Document Number: 81710 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 I - Forward Current (mA) F I - Relative Luminous Intensity V rel - Angular Displacement