VO4157, VO4158 www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing, High dV/dt, Low Input Current FEATURES 1 6 MT2 A High static dV/dt 5 kV/s High input sensitivity I = 1.6 mA, 2 mA, and FT C 5 2 NC 3 mA 300 mA on-state current ZCC* NC 3 4 MT1 Zero voltage crossing detector *Zero crossing circuit i179030 4 21842-1 V 700 V and 800 V blocking voltage DE Isolation test voltage 5300 V RMS Compliant to RoHS Directive 2011/65/EU DESCRIPTION The VO4157 and VO4158 consists of a GaAs IRLED APPLICATIONS optically coupled to a photosensitive zero crossing TRIAC Solid-state relays packaged in a DIP-6 package. Industrial controls High input sensitivity is achieved by using an emitter follower phototransistor and a cascaded SCR predriver Office equipment resulting in an LED trigger current of 1.6 mA for bin D, 2 mA Consumer appliances for bin H, and 3 mA for bin M. AGENCY APPROVALS The new phototriac zero crossing family uses a proprietary dV/dt clamp resulting in a static dV/dt of greater than UL1577, file no. E52744 system code H or J, double 5 kV/s. protection The VO4157 and VO4158 isolates low-voltage logic from cUL - file no. E52744, equivalent to CSA bulletin 5A 120 V , 240 V , and 380 V lines to control resistive, AC AC AC DIN EN 60747-5-2 (VDE 0884) available with option 1 inductive, or capacitive loads including motors, solenoids, FIMKO high current thyristors or TRIAC and relays. ORDERING INFORMATION DIP-6 Option 6 V O 415 X - X 0 T PART NUMBER PACKAGE OPTION TAPE 10.16 mm 7.62 mm AND REEL Option 7 Option 8 9.27 mm > 0.7 mm V 700 V 800 DRM DRM AGENCY CERTIFIED/PACKAGE TRIGGER CURRENT, I (mA) FT UL, cUL 1.6 2 3 1.6 2 3 DIP-6 VO4157D VO4157H VO4157M VO4158D VO4158H VO4158M DIP-6, 400 mil, option 6 VO4157D-X006 VO4157H-X006 VO4157M-X006 VO4158D-X006 VO4158H-X006 VO4158M-X006 SMD-6, option 7 VO4157D-X007T VO4157H-X007T VO4157M-X007T VO4158D-X007T VO4158H-X007T VO4158M-X007T VDE, UL, cUL 1.6 2 3 1.6 2 3 DIP-6 - - VO4157M-X001 - - - DIP-6, 400 mil, option 6 - ---- VO4158M-X016 SMD-6, option 7 VO4157D-X017T VO4157H-X017T VO4157M-X017T - VO4158H-X017T - SMD-6, option 8 - ---- VO4158M-X018T Rev. 1.8, 14-Feb-12 Document Number: 84634 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VO4157, VO4158 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Surge current I 2.5 A FSM Derate from 25 C 1.33 mW/C OUTPUT VO4157D/H/M V 700 V DRM Peak off-state voltage VO4158D/H/M V 800 V DRM RMS on-state current I 300 mA TM Derate from 25 C 6.6 mW/C COUPLER Isolation test voltage (between emitter and detector, climate per t = 1 min V 5300 V ISO RMS DIN 500414, part 2, Nov. 74) Storage temperature range T - 55 to + 150 C stg Ambient temperature range T - 55 to + 100 C amb max. 10 s dip soldering Soldering temperature T 260 C sld 0.5 mm from case bottom Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. This phototriac should not be used to drive a load directly. It is intended to be a trigger device only. 350 300 250 I = 3 mA to 10 mA F 200 150 100 50 0 - 40 - 20 0 20 40 60 80 100 T - Temperature (C) 19623 amb Fig. 1 - Recommended Operating Condition Rev. 1.8, 14-Feb-12 Document Number: 84634 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 I - Load Current (mA) L