VO4258M Vishay

333 3 VO4257, VO4258 www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, High dV/dt, Low Input Current FEATURES High static dV/dt 5 kV/s High input sensitivity I = 1.6 mA, 2 mA, and FT 1 6 MT2 A 3 mA 700 and 800 V blocking voltage NC 2 5 C 300 mA on-state current 3 4 MT1 NC Isolation rated voltage 4420 V RMS Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS 23165 Solid-state relays LINKS TO ADDITIONAL RESOURCES Industrial controls Office equipment 3D Models Design Tools Related Models Footprints Consumer appliances Documents AGENCY APPROVALS Schematics UL cUL DESCRIPTION DIN EN 60747-5-5 (VDE 0884-5), available with option 1 The VO4257 and VO4258 phototriac consists of a GaAs FIMKO IRLED optically coupled to a photosensitive non-zero crossing TRIAC packaged in a DIP-6 package. High input sensitivity is achieved by using an emitter follower phototransistor and a cascaded SCR predriver resulting in an LED trigger current of 1.6 mA for bin D, 2 mA for bin H, and 3 mA for bin M. The new non zero phototriac family use a proprietary dV/dt clamp resulting in a static dV/dt of greater than 5 kV/s. The VO4257, VO4258 phototriac isolates low-voltage logic from 120 VAC, 240 VAC, and 380 VAC lines to control resistive, inductive, or capacitive loads including motors, solenoids, high current thyristors or TRIAC and relays. ORDERING INFORMATION DIP-6 Option 6 V O 425 X - X 0 0 T 10.16 mm 7.62 mm Option 7 TAPE PART NUMBER PACKAGE OPTION AND REEL > 0.7 mm V 700 V 800 DRM DRM AGENCY CERTIFIED / PACKAGE TRIGGER CURRENT, I (mA) FT UL, cUL, BSI, FIMKO 3 1.6 2 3 DIP-6 VO4257M VO4258D VO4258H VO4258M DIP-6, 400 mil, option 6 - - VO4258H-X006 - SMD-6, option 7 - VO4258D-X007T VO4258H-X007T VO4258M-X007T VDE, UL, cUL, BSI, FIMKO 3 1.6 2 3 SMD-6, option 7 ---- Rev. 1.8, 12-Oct-2020 Document Number: 84635 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D VO4257, VO4258 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Derate from 25 C 1.33 mW/C OUTPUT VO4257D/H/M V 700 V DRM Peak off-state voltage VO4258D/H/M V 800 V DRM RMS on-state current I 300 mA TM Derate from 25 C 6.6 mW/C COUPLER Storage temperature range T -55 to +150 C stg Ambient temperature range T -55 to +100 C amb Max. 10 s dip soldering Soldering temperature T 260 C sld 0.5 mm from case bottom Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability 350 300 250 I = 3 mA to 10 mA F 200 150 100 50 0 -40 -20 0 20 40 60 80 100 T - Temperature (C) 19623-1 amb Fig. 1 - Recommended Operating Condition Rev. 1.8, 12-Oct-2020 Document Number: 84635 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 I - Load Current (mA) L