VO617A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS FEATURES Operating temperature from -55 C to +110 C Good CTR linearity depending on forward current Isolation test voltage, 5300 V RMS High collector emitter voltage, V = 80 V CEO A 1 4 C Low saturation voltage Fast switching times Low CTR degradation C 2 3 E Temperature stable Low coupling capacitance End stackable, 0.100 (2.54 mm) spacing High common mode interference immunity Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS 17918-24 AC adapters SMPS DESCRIPTION PLC The 110 C rated VO617A feature a high current transfer Factory automation ratio, low coupling capacitance and high isolation voltage. Game consoles These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor AGENCY APPROVALS detector, and is incorporated in a plastic DIP-4 package. Safety application model number covering all products in The coupling devices are designed for signal transmission this data sheet is VO617A. This model number should be between two electrically separated circuits. used when consulting safety agency documents. The couplers are end-stackable with 2.54 mm spacing. UL1577, file no. E52744 Creepage and clearance distances of > 8.0 mm are cUL tested to CSA 22.2 bulletin 5A achieved with option 6. This version complies with DIN EN 60747-5-5 (VDE 0884-5), available with option 1 IEC 60950 (DIN VDE 0805) for reinforced insulation up to an BSI IEC 60950 IEC 60065 operation voltage of 400 V or DC. Specifications subject RMS FIMKO EN 60065, EN 60950-1 to change. CQC GB8898-2011 ORDERING INFORMATION DIP-4 Option 6 VO 6 1 7 A - X 0 T 7.62 mm 10.16 mm PART NUMBER CTR PACKAGE OPTION TAPE BIN AND Option 7 Option 8 REEL > 8 mm 9.27 mm CTR (%) AGENCY CERTIFIED/PACKAGE 5 mA UL, cUL, BSI, FIMKO 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 200 to 400 DIP-4 VO617A VO617A-1 VO617A-2 VO617A-3 VO617A-4 VO617A-7 VO617A-8 VO617A-9 VO617A- VO617A- DIP-4, 400 mil, option 6 - - - --- 3X006 4X006 VO617A- VO617A- VO617A- SMD-4, option 7 - - --- 2X007T 3X007T 4X007T VDE, UL, cUL, BSI, FIMKO 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 80 to 160 130 to 260 200 to 400 VO617A- VO617A- VO617A- VO617A- VO617A- DIP-4, 400 mil, option 6 - - - 3X016 4X016 7X016 8X016 9X016 VO617A- VO617A- VO617A- VO617A- VO617A- VO617A- VO617A- SMD-4, option 7 - 1X017T 2X017T 3X017T 4X017T 7X017T 8X017T 9X017T VO617A- VO617A- VO617A- SMD-4, 400 mil, option 8 -- --- X018T 3X018T 4X018T Note Additional options may be possible, please contact sales office Rev. 2.6, 26-Mar-18 Document Number: 83430 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VO617A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER CONDITIONS SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Forward surge current t 10 s I 1.5 A p FSM LED power dissipation P 70 mW diss OUTPUT Collector emitter voltage V 80 V CEO Emitter collector voltage V 7V ECO Collector current I 50 mA C Collector peak current t /T = 0.5, t 10 ms I 100 mA p p CM Ouput power dissipation P 150 mW diss COUPLER Total power dissipation P 200 mW tot Operation temperature T -55 to +110 C amb Storage temperature range T -55 to +150 C stg Soldering temperature 2 mm from case, 10 s T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability 250 200 Coupled device 150 Detector 100 50 LED 0 0 20 40 60 80 100 120 T - Ambient Temperature (C) amb Fig. 1 - Total Power Dissipation vs. Ambient Temperature Rev. 2.6, 26-Mar-18 Document Number: 83430 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P - Total Power Dissipation (mW) tot