VS-131MT...C Series www.vishay.com Vishay Semiconductors Three Phase Bridge, 130 A (Power Modules) FEATURES Blocking voltage up to 1800 V High surge capability High thermal conductivity package, electrically insulated case Excellent power volume ratio 3600 V isolating voltage RMS UL approved file E78996 Designed for industrial level Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MTC DESCRIPTION PRIMARY CHARACTERISTICS A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. I 130 A at 120 C O They are intended for use in general purpose and heavy duty V 1600 V to 1800 V RRM applications. Package MTC Circuit configuration Three phase bridge MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS 218 A (1) I O T 85 C C 50 Hz 1270 I A FSM 60 Hz 1330 50 Hz 8095 2 2 I t A s 60 Hz 7390 2 2 I t 80 955 A s V Range 1600 to 1800 V RRM T Range -40 to +125 C Stg T Range -40 to +150 C J Note (1) Maximum output current must be limited to 220 A to do not exceed the maximum temperature of terminals ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS V , MAXIMUM REPETITIVE V , MAXIMUM NON-REPETITIVE I MAXIMUM RRM RSM RRM VOLTAGE TYPE NUMBER PEAK REVERSE VOLTAGE PEAK REVERSE VOLTAGE AT T = MAXIMUM J CODE V V mA 160 1600 1700 VS-131MT...C 12 180 1800 1900 Revision: 16-Feb-2022 Document Number: 96989 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VS-131MT...C Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS 130 A Maximum DC output current I 120 rect. conduction angle O at case temperature 120 C t = 10 ms 1270 No voltage reapplied t = 8.3 ms 1330 Maximum peak, one-cycle forward, I A FSM non-repetitive surge current t = 10 ms 1070 100 % V RRM reapplied t = 8.3 ms 1120 Initial T = T maximum J J t = 10 ms 8095 No voltage reapplied t = 8.3 ms 7390 2 2 2 Maximum I t for fusing I t A s t = 10 ms 5725 100 % V RRM reapplied t = 8.3 ms 5225 2 2 2 Maximum I t for fusing I t t = 0.1 ms to 10 ms, no voltage reapplied 80 955 A s Low level value of threshold voltage V (16.7 % x x I < I < x I ), T maximum 0.79 FT(TO)1 F(AV) F(AV) J V High level value of threshold voltage V (I > x I ), T maximum 0.96 FT(TO)2 F(AV) J Low level value of forward slope resistance r 16.7 % x x I < I < x I , T maximum 4.97 f1 F(AV) F(AV) J m High level of forward slope resistance r (I > x I ), T maximum 4.63 f2 F(AV) J Maximum forward voltage drop V I = 300 A, T = 25 C, per junction 2.05 FM pk J V RMS isolation voltage V T = 25 C, all terminal shorted f = 50 Hz, t = 1 s 3600 ISOL J THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction operating T -40 to +150 J C Maximum storage temperature T -40 to +125 Stg DC operation per module 0.068 Maximum thermal resistance, R thJC junction to case DC operation per junction 0.41 C/W Typical thermal resistance, Per module R 0.03 thCS case to heatsink Mounting surface smooth, flat, and greased to heatsink A mounting compound is recommended and the 5 Mounting torque Nm torque should be rechecked after a period of 3 h to 15 % to terminal 5 allow for the spread of the compound. Lubricated Approximate weight 235 g threads. R CONDUCTION PER JUNCTION SINE HALF WAVE CONDUCTION RECTANGULAR WAVE CONDUCTION DEVICES UNITS 180 120 90 60 30 180 120 90 60 30 VS-131MT...C Series 0.052 0.06 0.075 0.106 0.164 0.038 0.063 0.081 0.109 0.165 C/W Note Table shows the increment of thermal resistance R when devices operate at different conduction angles than DC thJC Revision: 16-Feb-2022 Document Number: 96989 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000