VS-300MT...C Series www.vishay.com Vishay Semiconductors Three Phase Bridge, 300 A (Power Modules) FEATURES Blocking voltage up to 1800 V High surge capability High thermal conductivity package, electrically insulated case Excellent power volume ratio 3600 V isolating voltage RMS UL approved file E78996 Designed for industrial level Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 MTC DESCRIPTION PRIMARY CHARACTERISTICS A range of extremely compact, encapsulated three phase I 300 A at 100 C O bridge rectifiers offering efficient and reliable operation. V 1600 V to 1800 V They are intended for use in general purpose and heavy duty RRM applications. Package MTC Circuit configuration Three phase bridge MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS VALUES UNITS 258 A (1) I O T 110 C C 50 Hz 2400 I A FSM 60 Hz 2512 50 Hz 28 795 2 2 I t A s 60 Hz 26 285 2 2 I t 287 955 A s V Range 1600 to 1800 V RRM T Range -40 to +125 C Stg T Range -40 to +150 C J Note (1) Maximum output current must be limited to 250 A to do not exceed the maximum temperature of terminals ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS V , MAXIMUM REPETITIVE V , MAXIMUM NON-REPETITIVE I MAXIMUM RRM RSM RRM VOLTAGE TYPE NUMBER PEAK REVERSE VOLTAGE PEAK REVERSE VOLTAGE AT T = MAXIMUM J CODE V V mA 160 1600 1700 VS-300MT...C 12 180 1800 1900 Revision: 03-Mar-18 Document Number: 95682 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000VS-300MT...C Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS 300 A Maximum DC output current I 120 rect. conduction angle O at case temperature 100 C t = 10 ms 2400 No voltage reapplied t = 8.3 ms 2512 Maximum peak, one-cycle I A FSM forward, non-repetitive surge current t = 10 ms 2018 100 % V RRM reapplied t = 8.3 ms 2113 Initial T = T maximum J J t = 10 ms 28 795 No voltage reapplied t = 8.3 ms 26 285 2 2 2 Maximum I t for fusing I t A s t = 10 ms 20 360 100 % V RRM reapplied t = 8.3 ms 18 590 2 2 2 Maximum I t for fusing I t t = 0.1 ms to 10 ms, no voltage reapplied 287 955 A s (16.7 % x x I < I < x I ), F(AV) F(AV) Low level value of threshold voltage V 0.79 FT(TO)1 T maximum J V High level value of threshold voltage V (I > x I ), T maximum 0.96 FT(TO)2 F(AV) J 16.7 % x x I < I < x I ), F(AV) F(AV) Low level value of forward slope resistance r 3.36 f1 T maximum J m High level of forward slope resistance r (I > x I ), T maximum 3.22 f2 F(AV) J I = 240 A, T = 25 C, per junction 1.54 pk J Maximum forward voltage drop V FM I = 300 A, T = 25 C, per junction 1.7 pk J V T = 25 C, all terminal shorted J RMS isolation voltage V 3600 ISOL f = 50 Hz, t = 1 s THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS Maximum junction operating T -40 to +150 J C Maximum storage temperature T -40 to +125 Stg DC operation per module 0.038 Maximum thermal resistance, R thJC junction to case DC operation per junction 0.23 C/W Typical thermal resistance, Per module R 0.03 thCS case to heat sink Mounting surface smooth, flat, and greased to heat sink 5 Mounting A mounting compound is recommended and the torque should be Nm torque 15 % to terminal rechecked after a period of 3 hours to allow for the spread of the 5 compound. Lubricated threads. Approximate weight 235 g R CONDUCTION PER JUNCTION SINE HALF WAVE CONDUCTION RECTANGULAR WAVE CONDUCTION DEVICES UNITS 180 120 90 60 30 180 120 90 60 30 VS-300MT...C Series 0.044 0.050 0.061 0.087 0.143 0.029 0.050 0.066 0.091 0.145 C/W Note Table shows the increment of thermal resistance R when devices operate at different conduction angles than DC thJC Revision: 03-Mar-18 Document Number: 95682 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000